| AVESİS

Publication Type

Publication Sub Type

(WOS) Research Areas

SDG

Researchers

Year


Published journal articles indexed by SCI, SSCI, and AHCI
FDM yöntemi ile üretilen eklemeli imalat parçaları için delik delme işlem parametrelerinin optimizasyonu Can E. S., Ayhan E., Yurdakul M., İç Y. T. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.40, no.1, pp.11-27, 2025 (SCI-Expanded)
Synthesis of novel carbazole hydrazine-carbothioamide scaffold as potent antioxidant, anticancer and antimicrobial agents Çapan İ., Hawash M., T. Qaoud M., Gülüm L., Yenilmez Tunoglu E. N., Uçar Çifci K., et al. BMC Chemistry , vol.18, pp.1-21, 2024 (SCI-Expanded)
Enhancing Wear Resistance and Mechanical Behaviors of AA7020 Alloys Using Hybrid Fe3O4-GNP Reinforcement Taşcı U., Yılmaz T. A., Karakoç H., Karabulut Ş. Lubricants , vol.12, no.6, pp.1-23, 2024 (SCI-Expanded)
Deciphering the Biophysical Properties of Ion Channel Gating Pores by Coumarin–Benzodiazepine Hybrid Derivatives: Selective AMPA Receptor Antagonists Qneibi M., Hawash M., GÜMÜŞ M., ÇAPAN İ., SERT Y., Bdir S., et al. Molecular Neurobiology , vol.61, no.7, pp.4565-4576, 2024 (SCI-Expanded)
A new, fast and selective electrochemical sensor based on Bismuthiol-I for the voltammetric detection of tartrazine, a synthetic food dye, in soft drinks TABANLIGİL CALAM T. Microchemical Journal , vol.197, 2024 (SCI-Expanded)
Quaternary functional semiconductor devices ALTINDAL YERİŞKİN S., Dere A., Orman Y., Yakuphanoğlu F. Physica Scripta , vol.99, no.7, 2024 (SCI-Expanded)
Investigation and Optimization of Cutting Performance of High Chrome White Cast Iron by Wire Erosion URTEKİN L., Sahin I. B., Yilan F., Kuloglu E., GENÇ A. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.49, no.2, pp.1585-1596, 2024 (SCI-Expanded)
Improving the combustion process of a homogeneous charge compression ignition engine running with triple fuel blend using response surface methodology Ardebili S. M. S., CALAM A., SOLMAZ H., Böğrek A., Haşimoğlu C. Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.46, no.8, 2024 (SCI-Expanded)
Inverse Model Predictive Control for Power Electronic Converters Sharida A., Bayhan S., Abu-Rub H., Fesli U. IEEE ACCESS , vol.0, no.0, pp.1, 2024 (SCI-Expanded)
Preparation and Characterization Novel Edible Nanocomposite Films Based on Sodium Alginate and Graphene Nanoplatelet, via Box-Behnken Design TAŞKIN ÇAKICI G., BATIR G. G., YOKUŞ A. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.49, no.1, pp.285-298, 2024 (SCI-Expanded)
Selection of Secondary Hub Airport Location Based on Connectivity and Green Airport Solutions HATİPOĞLU S., ERGÜL H., Yazıcı E. Networks and Spatial Economics , vol.24, no.2, pp.507-529, 2024 (SCI-Expanded)
Frequency-dependent dielectric, electric modulus, and ac conductivity features of Au/n-Si Schottky diodes (SDs) with PVC and (PVC:Graphite/Graphene-Oxide) interlayer ALTINDAL YERİŞKİN S., Taşçıoğlu İ., BADALI Y. Journal of Physics D: Applied Physics , vol.57, no.31, 2024 (SCI-Expanded)
The Electrical and Photodetector Characteristics of the Graphene:PVA/p-Si Schottky Structures Depending on Illumination Intensities ULUSOY M., Koçyiğit S., TATAROĞLU A., ALTINDAL YERİŞKİN S. ACS Omega , vol.9, no.29, pp.32243-32255, 2024 (SCI-Expanded)
Tripeptide linked dispiro cyclotriphosphazene conjugates: Synthesis, molecular docking analysis of compounds binding within cancer cell line receptors and in vitro cytotoxic and genotoxic activities Çalışkan E., ÇAPAN İ., TEKİN S., Qaoud M. T., Biryan F., Koran K., et al. Bioorganic Chemistry , vol.150, 2024 (SCI-Expanded)
Fracture and Wear Behavior of Functionally Graded 316L–TiC Composite Fabricated by Selective Laser Melting Additive Manufacturing Yazdani S., TEKELİ S., Rabieifar H., Akbarzadeh E. Steel Research International , vol.95, no.9, 2024 (SCI-Expanded)
Preparation of biocompatible microsphere-cryogel composite system and controlled release of mupirocin Yavuz B., Kondolot Solak E., Oktar C. International Journal of Polymeric Materials and Polymeric Biomaterials , vol.73, no.5, pp.354-361, 2024 (SCI-Expanded)
Enhanced electrical parameters of the Au/n-Si Schottky barrier diodes with graphite/graphane oxide doped PVC interlayer Taşçıoğlu İ., BADALI Y., ALTINDAL YERİŞKİN S. Physica Scripta , vol.99, no.8, 2024 (SCI-Expanded)
Model Predictive Control Method With Reduced Switching States for Single-Stage Buck–Boost Rectifier GÜLER N., Komurcugil H., FESLİ U., Bayhan S., Abu-Rub H. IEEE Transactions on Industrial Electronics , vol.71, no.11, pp.13921-13931, 2024 (SCI-Expanded)
Designing of Polymeric Nanoparticles for Enhanced Breast Cancer Therapy: Combining Paclitaxel, Boric Acid and Tannic Acid for Controlled Drug Delivery Kaya S., Kondolot Solak E., Yiyit Doğan S., Demirkaya A., Sağdıçoğlu Celep A. G. CHEMISTRYSELECT , vol.9, no.7, 2024 (SCI-Expanded)
Performance evaluation of the Fe–Cl and Mg–Cl cycle for hydrogen production of the minor actinide fuelled PACER fusion blanket Acır A., Özkaya M. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , vol.67, pp.634-643, 2024 (SCI-Expanded)
Quercetin-loaded sodium alginate/collagen/h-boron nitride potential wound dressings prepared using the Box-Behnken experimental design Cakici G., Kaya S., Dogan S., Kondolot Solak E. BIOTECHNOLOGY JOURNAL , vol.19, no.1, 2024 (SCI-Expanded)
Optimization of voltammetric parameters for sensitive and simultaneous determination of ferulic acid and vanillin using a glassy carbon electrode based on 2-aminonicotinic acid in the presence of surfactant media TABANLIGİL CALAM T., TAŞKIN G. Food Chemistry , vol.436, 2024 (SCI-Expanded)
The probe of current conduction mechanisms, interface states, and the forward bias intersection point of the al/Al2O3/Ge/p-Si heterostructures depending on temperature Akın B., A.Hameed S., ALTINDAL YERİŞKİN S., ULUSOY M., Durmuş H. Materials Science in Semiconductor Processing , vol.184, 2024 (SCI-Expanded)
Correlation of microstructure, hardness, and electrical conductivity of hypereutectic Al-Si/B4C composites manufactured by hot pressing technique and subjected to hot extrusion ÖZER A., Cetin H. CANADIAN METALLURGICAL QUARTERLY , vol.63, no.2, pp.350-359, 2024 (SCI-Expanded)
Influence of Shielding Gas on the Microstructure and Mechanical Properties of Duplex Stainless Steel in Wire Arc Additive Manufacturing Akbarzadeh E., YURTIŞIK K., GÜR C. H., Saeid T., Tavangar R. METALS AND MATERIALS INTERNATIONAL , vol.30, no.7, pp.1977-1996, 2024 (SCI-Expanded)
Sulfonyl hydrazone derivatives containing acetonaphtone as anticholinesterase inhibitors for the treatment of Alzheimer's: X-ray single-crystal analysis, and multifaced theoretical calculations ÖZDEMİR ÖZMEN Ü., Alyar S., Bilen Ayan E., CANBOLAT N., Hamurcu F., Alyar H., et al. Journal of Molecular Structure , vol.1318, 2024 (SCI-Expanded)
Determination of the relative sensitivity of polyaniline inks and films to deprotonation by ammonia using UV–Vis spectroscopy UDUM Y., Killard A. J., Wagner M. European Polymer Journal , vol.205, 2024 (SCI-Expanded)
A new nanocomposite membrane based on sulfonated polysulfone boron nitride for proton exchange membrane fuel cells: Its fabrication and characterization Kocakulak T., TAŞKIN G., TABANLIGİL CALAM T., SOLMAZ H., CALAM A., Arslan T. A., et al. Fuel , vol.374, 2024 (SCI-Expanded)
Electric Vehicles: A Comprehensive Review of Technologies, Integration, Adoption, and Optimization FESLİ U., ÖZDEMİR M. B. IEEE Access , 2024 (SCI-Expanded)
Investigation of the interface state characteristics of the Al/Al2O3/Ge/p-Si heterostructure over a wide frequency range by capacitance and conductance measurements Akın B., ULUSOY M., ALTINDAL YERİŞKİN S. Materials Science in Semiconductor Processing , vol.170, 2024 (SCI-Expanded)
Mechanical Properties and Corrosion Behaviour of Copper/Titanium Composite Plates made by Explosive Welding after Heat Treatment YILDIRIM M. S., Kaya Y. Transactions of the Indian Institute of Metals , 2024 (SCI-Expanded)
Novel Adaptive Energy Management Technique for Multiport Fast EV Chargers Sharida A., Bayhan S., Abu-Rub H., Fesli U. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS , pp.1-11, 2024 (SCI-Expanded)
Exploration of isoxazole analogs: Synthesis, COX inhibition, anticancer screening, 3D multicellular tumor spheroids, and molecular modeling Hawash M., Abdallah S., KENANOĞLU M. F., Melhem Y., Abu Shamat M., Aghbar M., et al. European Journal of Medicinal Chemistry , vol.271, 2024 (SCI-Expanded)
D-A-D type functional conducting polymer: Development of its electrochromic properties and laccase biosensor UDUM Y., Aktas Gemci M., Cevher D., Soylemez S., ÇIRPAN A., Toppare L. Journal of Applied Polymer Science , vol.140, no.11, 2023 (SCI-Expanded)
Molecular docking, HOMO-LUMO and quantum chemical computation analysis of anti-glyoximehydrazone derivatives containing pyrazolone moiety and their transition metal complexes Sarikavakli N., Genç O., Çalişkan Ş. G., Erol F. Journal of the Indian Chemical Society , vol.100, no.5, 2023 (SCI-Expanded)
The Effect of Insert Surface Roughness in Part Production with Inserted Powder Injection Molding Method Samet K., SUBAŞI M., KARATAŞ Ç. SCIENCE OF SINTERING , vol.55, no.1, pp.89-101, 2023 (SCI-Expanded)
Effect of ball-burnishing on surface integrity and fatigue behaviour of 7175-T6 AA Özer M., Dalli K., Özer A. MATERIALS SCIENCE AND TECHNOLOGY , vol.39, no.2, pp.248-257, 2023 (SCI-Expanded)
The effect of quenching/double quenching and tempering heat treatment cycles on the microstructure, impact energy and hardness of AISI H13 tool steel Özer A., Ozer M., Atak Ç., Altuntas G. CANADIAN METALLURGICAL QUARTERLY , 2023 (SCI-Expanded)
Investigation of the hydrogen production of the PACER fusion blanket integrated with Fe–Cl thermochemical water splitting cycle ÖZKAYA M., ACIR A., Yalçın Ş. Nuclear Engineering and Technology , vol.55, no.11, pp.4287-4294, 2023 (SCI-Expanded)
Super Twisting Sliding Mode Control Strategy for Input Series Output Parallel Converters GÜLER N., BAYHAN S., FESLİ U., Blinov A., Vinnikov D. IEEE ACCESS , vol.11, pp.107394-107403, 2023 (SCI-Expanded)
Development of ketorolac tromethamine loaded biocompatible polymeric microspheres and matrix films: designing for topical application Kaya S., Kondolot Solak E. INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS , vol.72, no.17, pp.1329-1339, 2023 (SCI-Expanded)
Design, Synthesis and Evaluation of Aryl-Tailored Oxadiazole-thiones as New Urease Inhibitors Gür Maz Z. T., Caliskan H. B., Capan İ., Caliskan B., Özçelik B., Banoglu E. CHEMISTRYSELECT , vol.8, no.8, 2023 (SCI-Expanded)
The mechanical properties of austempered 1.75Ni-1.5Cu-0.5Mo alloyed PM steels GÜRAL A., Altuntaş O., Sarıçiçek N. Canadian Metallurgical Quarterly , 2023 (SCI-Expanded)
The effects of metallic fuel addition into canola oil biodiesel on combustion, engine performance and exhaust emissions Opuz M., Uyumaz A., Babagiray M., SOLMAZ H., CALAM A., Aksoy F. JOURNAL OF THE ENERGY INSTITUTE , vol.111, 2023 (SCI-Expanded)
Investigation of the effect of carbon nanotube addition to diesel-biodiesel blend on engine performance and exhaust emissions Solmaz H., Sürer E., Yılmaz E., Calam A., İpci D. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.38, no.2, pp.1055-1064, 2023 (SCI-Expanded)
UV-curable Schiff base-containing polymeric adsorbent for selective and efficient removal of Au(III) from aqueous solutions Aydın Urucu O., Beyler Çiğil A., Zülfikaroğlu A., Esentürk O. Materials Today Communications , vol.37, 2023 (SCI-Expanded)
Building Block Engineering toward Realizing High-Performance Electrochromic Materials and Glucose Biosensing Platform Karabag A., Soyler D., UDUM Y., TOPPARE L. K., GÜNBAŞ E. G., Soylemez S. Biosensors , vol.13, no.7, 2023 (SCI-Expanded)
Voltage-Sensorless Open-Switch Fault-Tolerant Control of Three-Phase T-Type Rectifier Sharida A., Bayhan S., Abu-Rub H., FESLİ U. IEEE Transactions on Power Electronics , vol.38, no.12, pp.15365-15376, 2023 (SCI-Expanded)
Investigation of microstructure, wear and transverse rupture strength of WE43/nano B4C composites produced by powder metallurgy method Taşcı U., Yılmaz T. A., Bostan B. Tribology International , vol.180, 2023 (SCI-Expanded)
Thermal and dielectric properties of flexible polyimide nanocomposites with functionalized nanodiamond and silver nanoparticles BİRTANE H., BEYLER ÇİĞİL A., MADAKBAŞ S., ESMER K., KAHRAMAN M. V. POLYMER BULLETIN , vol.80, no.5, pp.5353-5371, 2023 (SCI-Expanded)
Investigation of the microstructure, machinability and hole quality of AISI 1045 steel forged at different temperatures TEKAÜT İ. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , vol.237, no.5, pp.1866-1877, 2023 (SCI-Expanded)
Investigation of the machinability of B4C+TiB2/Al 2024 composite manufactured by powder metallurgy with EDM ÖZERKAN H. B., SUBAŞI M., Pul M. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , vol.237, no.6, pp.1357-1369, 2023 (SCI-Expanded)
Substituted 1,2,4-Triazoles as Novel and Selective Inhibitors of Leukotriene Biosynthesis Targeting 5-Lipoxygenase-Activating Protein Olğaç A., Çapan İ., Dahlke P., Jordan P. M., Werz O., Banoglu E. ACS OMEGA , vol.8, no.34, pp.31293-31304, 2023 (SCI-Expanded)
Fluorimetric Reusable Polymeric Sensor for Hydrogen Sulfide Detection Unaldi A. S., ÇUBUK S., BEYLER ÇİĞİL A., KAHRAMAN M. V. JOURNAL OF FLUORESCENCE , vol.33, no.4, pp.1651-1659, 2023 (SCI-Expanded)
Chitosan–poly(acrylamide-co-maleic acid) composite synthesis, characterization, and investigation of protein adsorption behavior AKKAYA R., AKKAYA B., Çakıcı G. Polymer Bulletin , vol.80, no.4, pp.4153-4168, 2023 (SCI-Expanded)
Determination of optimum operating parameters of MWCNT-doped ethanol fueled HCCI engine for emission reduction Kocakulak T., Arslan T. A., ŞAHİN F., SOLMAZ H., Ardebili S. M. S., CALAM A. Science of the Total Environment , vol.895, 2023 (SCI-Expanded)
Electrochemical detection of Oxaliplatin induced DNA damage in G-quadruplex structures Osmanoğulları S. C., FOROUGH M., PERSİL ÇETİNKOL Ö., UDUM Y., Toppare L. Analytical Biochemistry , vol.671, 2023 (SCI-Expanded)
Analysis of ATC-related aviation accidents and incidents Nikšić L., ARIKAN ÖZTÜRK E. Aircraft Engineering and Aerospace Technology , vol.95, no.6, pp.890-898, 2023 (SCI-Expanded)
Synthesis, molecular docking, molecular dynamics and evaluation of Drug-Likeness properties of the fused N-Formyl pyrazoline substituted new dehydroepiandrosterone derivatives ÇAPAN İ., Shehu A., SERT Y., ÇELİK İ., EROL M., KOCA İ., et al. JOURNAL OF BIOMOLECULAR STRUCTURE & DYNAMICS , vol.41, no.6, pp.2492-2503, 2023 (SCI-Expanded)
Analysis of the effects of lubricating oil viscosity and engine speed on piston-cylinder liner frictions in a single cylinder HCCI engine by GT-SUITE program KUNT M. A., CALAM A., Gunes H. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , vol.237, no.2, pp.399-409, 2023 (SCI-Expanded)
Evaluation of MWCNT as fuel additive to diesel-biodiesel blend in a direct injection diesel engine Solmaz H., Calam A., Yılmaz E., Şahin F., Ardebili S. M. S., Aksoy F. BIOFUELS-UK , vol.14, no.2, pp.147-156, 2023 (SCI-Expanded)
Optimization of square wave voltammetry parameters by response surface methodology for the determination of Sunset yellow using an electrochemical sensor based on Purpald® TABANLIGİL CALAM T., Taşkın Çakıcı G. Food Chemistry , vol.404, 2023 (SCI-Expanded)
Analysis of surface roughness and energy consumption in turning of C17500 copper alloy under different machining environments and modellings with response surface method Çakıroğlu R., Günay M. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , vol.237, no.2, pp.207-219, 2023 (SCI-Expanded)
A study of hydrogen production by using SMR, S-I and HTE methods in a PACER fusion concept based on thorium molten salt fuel ASAL Ş., ÖZKAYA M., ACIR A. Fuel , vol.333, 2023 (SCI-Expanded)
Nano TiO2-doped sodium alginate/hydroxypropyl methylcellulose synthesis of bionanocomposite membrane and its use in controlled release of anti-cancer drug 5-fluorouracil Taşkın Çakıcı G. Polymer Bulletin , vol.80, no.12, pp.12719-12740, 2023 (SCI-Expanded)
Investigation of the microstructure, hardness and electrical conductivity properties of Fe/Graphene compacts Altuntas O., ÖZER M., ALTUNTAŞ G., ÖZER A. Materials Science and Technology (United Kingdom) , vol.39, no.17, pp.2670-2679, 2023 (SCI-Expanded)
INVESTIGATION OF ANTIMICROBIAL PROPERTIES OF SOME SCHIFF BASES Çevrimli B. S., Muhammet S. M., Kalaycı Ş. ISAR Journal of Multidisciplinary Research and Studies , vol.1, no.6, pp.8-12, 2023 (SCI-Expanded)
Eco-friendly and potential colin esterase enzyme inhibitor agent sulfonyl hydrazone series: Synthesis, Bioactivity Screening, DFT, ADME properties, and Molecular Docking study Özdemir Özmen Ü., Tüzün B., Ayan E. B., Çevrimli B. S. Journal of Molecular Structure , vol.1286, 2023 (SCI-Expanded)
Multiresponse optimization of performance indicators through Taguchi-grey relational analysis in EDM of cemented carbide Çakıroğlu R., Günay M., Işık A. T. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY , vol.41, pp.490-500, 2023 (SCI-Expanded)
Predictive modelling and optimization of performance and emissions of an auto-ignited heavy naphtha/n-heptane fueled HCCI engine using RSM Kocakulak T., HALİS S., Ardebili S. M. S., Babagiray M., Haşimoğlu C., Rabeti M., et al. FUEL , vol.333, 2023 (SCI-Expanded)
Investigation of the effects of eco-friendly MQL system to improve the mechanical performance of WE43 magnesium alloys by the burnishing process Cagan S. C., TAŞCI U., Pruncu C. I., BOSTAN B. Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.45, no.1, 2023 (SCI-Expanded)
Controlled release of theophylline from ethyl cellulose coated PVA/NaCMC-theophylline microspheres Kirkayak N. C., Kondolot Solak E. INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS , vol.72, no.11, pp.825-833, 2023 (SCI-Expanded)
Synthesis, docking studies, in vitro cytotoxicity evaluation and DNA damage mechanism of new tyrosine-based tripeptides. Çalışkan E., Kaplan A., Şekerci G., Çapan İ., Tekin S., Erkan S., et al. Journal of biochemical and molecular toxicology , vol.37, no.8, 2023 (SCI-Expanded)
Design and Fuzzy-PI Control of Power Converters for Use in Solar Energy Systems Kenar M., Oğuz Y., Fidanboy H. ELECTRIC POWER COMPONENTS AND SYSTEMS , vol.0, no.0, pp.1-15, 2023 (SCI-Expanded)
Experimental investigation of trimethyl borate as a fuel additive for a SI engine Gültekin E., CALAM A., ŞAHİN M. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , vol.45, no.1, pp.419-433, 2023 (SCI-Expanded)
The first peptide derivatives of dioxybiphenyl-bridged spiro cyclotriphosphazenes: In vitro cytotoxicity activities and DNA damage studies Koran K., Çalışkan E., Altay Öztürk D., ÇAPAN İ., TEKİN S., SANDAL S., et al. Bioorganic Chemistry , vol.132, 2023 (SCI-Expanded)
Characterization and Investigation of Novel Benzodioxol Derivatives as Antidiabetic Agents: An In Vitro and In Vivo Study in an Animal Model Hawash M., Al-Smadi D., Kumar A., Olech B., Dominiak P. M., Jaradat N., et al. BIOMOLECULES , vol.13, no.10, pp.1-16, 2023 (SCI-Expanded)
Advances in organic photovoltaic cells: a comprehensive review of materials, technologies, and performance Kondolot Solak E., Irmak E. RSC ADVANCES , vol.13, no.18, pp.12244-12269, 2023 (SCI-Expanded)
Effects of process parameters on fatigue behavior and surface integrity of tool steel produced by electrical discharge turning Çakıroğlu R., Günay M. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , vol.54, no.1, pp.36-44, 2023 (SCI-Expanded)
Design, synthesis, molecular docking and biological evaluation of new carbazole derivatives as anticancer, and antioxidant agents Çapan İ., Hawash M., Jaradat N., Sert Y., Servi R., Koca İ. BMC Chemistry , vol.17, no.1, 2023 (SCI-Expanded)
Optimization of operating conditions in a homogeneous charge compression ignition engine with variable compression ratio Babagiray M., Kocakulak T., Ardebili S. M. S., Calam A., Solmaz H. INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY , vol.20, no.5, pp.5311-5332, 2023 (SCI-Expanded)
THE EFFECTS OF FRICTION STIR WELDING PARAMETERS ON MICROSTRUCTURE, FATIGUE LIFE AND TENSILE PROPERTIES OF ALUMINUM 2024-T3 ALLOY ŞIK A., ÖZER A. Archives of Metallurgy and Materials , vol.68, no.2, pp.499-505, 2023 (SCI-Expanded)
ENHANCEMENT OF HEAT PIPE THERMAL EFFICIENCY USING HEXAGONAL BORON NITRIDE/DEIONIZED WATER NANOFLUIDS ÖZTAŞKIN F. B., MENLİK T. Heat Transfer Research , vol.54, no.14, pp.43-61, 2023 (SCI-Expanded)
An Artificial Neural Network and Taguchi integrated approach on heat transfer and pressure drop in the solar air heater Ata İ., Çakıroğlu R., Acır A. HEAT TRANSFER RESEARCH , vol.53, no.3, pp.17-35, 2023 (SCI-Expanded)
Optimization of NACA 4412 augmented with a gurney fap by using grey relational analysis Çakıroğlu R., Acır A., Tanürün H. E., Üçgül F., Olkun S. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.45, no.3, pp.167, 2023 (SCI-Expanded)
An evaluation of antibacterial properties and cytotoxicity of UV-curable biocompatible films containing hydroxyethyl cellulose and silver nanoparticles Beyler Çiğil A., Özdemir Y., Birtane H. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , vol.245, pp.125516-125527, 2023 (SCI-Expanded)
Amperometric Sensing of Hydrogen Peroxide Using Graphene Oxide-Alizarin Modified Glassy Carbon Electrode MUHAMMET S. M. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE , vol.17, no.6, 2022 (SCI-Expanded)
Optimization of melting time of solar thermal energy storage unit containing spring type heat transfer enhancer by Taguchi based grey relational analysis Çinici O. K., Canlı M. E., Çakıroğlu R., Acır A. Journal of Energy Storage , vol.47, 2022 (SCI-Expanded)
Microstructure evolution and wear properties of ECAP-treated Al-Zn-Mg alloy: Effect of route, temperature and number of passes YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., BOSTAN B. MATERIALS TODAY COMMUNICATIONS , vol.33, 2022 (SCI-Expanded)
Effects of sintering techniques and parameters on microstructure and mechanical properties of Al-15Si-2,5Cu-0.5Mg compacts and Al-15Si-2,5Cu-0.5Mg/B4C composites Özer M., Aydoğan S. İ., Çinici H., Özer A. MATERIALS TODAY COMMUNICATIONS , vol.30, no.5, pp.1-14, 2022 (SCI-Expanded)
<p>Dielectric properties and negative-capacitance/dielectric in Au/n-Si structures with PVC and (PVC:Sm2O3) interlayer</p> ALTINDAL Ş., Barkhordari A., AZIZIAN-KALANDARAGH Y., ÇEVRİMLİ B. S., Mashayekhi H. R. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING , vol.147, 2022 (SCI-Expanded)
Discovery and Optimization of Piperazine Urea Derivatives as Soluble Epoxide Hydrolase (sEH) Inhibitors. Çapan İ., Jordan P. M., Olğaç A., Çalışkan B., Kretzer C., Werz O., et al. ChemMedChem , vol.17, no.12, 2022 (SCI-Expanded)
Investigation of radiation shielding by adding Al2O3and SiO2into the high-speed steel composites: Comparative study Gökmen U., Özkan Z., Taşcı U., Bilge Ocak S. Physica Scripta , vol.97, no.5, 2022 (SCI-Expanded)
A sensitive method for the determination of 4-aminophenol using an electrochemical sensor based on 5-amino-1,3,4-thiadiazole-2-thiol TABANLIGİL CALAM T., Cakici G. JOURNAL OF FOOD COMPOSITION AND ANALYSIS , vol.114, 2022 (SCI-Expanded)
Effect of random copolymerization on the optical properties of selenophene and thieno[3,4-c]pyrrole-4,6-dione conjugated polymers Yasa M., UDUM Y., TOPPARE L. K. MICROCHEMICAL JOURNAL , vol.178, 2022 (SCI-Expanded)
Determination of Some Trace Elements in Dried Red Plum Using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) Kalaycı Ş., Muhammet S. M. IRANIAN JOURNAL OF CHEMISTRY AND CHEMICAL ENGINEERING , vol.41, no.11, pp.3662-3666, 2022 (SCI-Expanded)
Methimazole Analogs as Urease Inhibitors: Synthesis, In Silico and In Vitro Evaluation ÇAPAN İ. CHEMISTRYSELECT , vol.7, no.4, 2022 (SCI-Expanded)
Multi-objective cost function based finite control set-sliding mode control strategy for single-phase split source inverters GÜLER N. Control Engineering Practice , vol.122, 2022 (SCI-Expanded)
Investigation of the effect of JP-8 fuel and biodiesel fuel mixture on engine performance and emissions by experimental and statistical methods Ardebili S. M. S., Kocakulak T., Aytav E., CALAM A. ENERGY , vol.254, 2022 (SCI-Expanded)
EFFECT OF FIBER-LAYER POSITIONS ON MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED MATERIALS MANUFACTURED BY FUSED DEPOSITION MODELING Polat Y. F., Yylmaz V. MATERIALI IN TEHNOLOGIJE , vol.56, no.3, pp.279-287, 2022 (SCI-Expanded)
Influence of sodium pentaborate (B5H10NaO13) additive in plasma electrolytic oxidation process on WE43 magnesium alloys ŞENOCAK T. Ç., Yilmaz T. A., BUDAK H. F., GÜLTEN G., Yilmaz A. M., EZİRMİK K. V., et al. Materials Today Communications , vol.30, 2022 (SCI-Expanded)
Influence of spark plasma sintering and conventional sintering on microstructure and mechanical properties of hypereutectic Al-Si alloy and hypereutectic Al-Si/B4C composites Özer M., Aydoğan S. İ., Özer A., Çinici H., Ayas E. KOVOVE MATERIALY , vol.60, no.3, pp.171-179, 2022 (SCI-Expanded)
Modeling, Analysis and Proportional Resonant and Proportional Integral Based Control Strategy for Single Phase Quasi-Z Source Inverters VADİ S., BAYINDIR R. IEEE ACCESS , vol.10, pp.87217-87226, 2022 (SCI-Expanded)
Cherenkov radiation technique for the determination o fission product Sr-90 in milk Aslan N., Erol F., Kormalı Ertürün H. E. INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY , 2022 (SCI-Expanded)
Combustion characteristics of naphtha and n-heptane fuels in an auto-ignited HCCI engine at different lambda values and engine loads CALAM A., Halis S., Aydogan B., Hasimoglu C. FUEL , vol.327, 2022 (SCI-Expanded)
The cutting power, specific cutting energy and surface roughness characterization in milling of 8740 steel AISI 8740 çeliǧinin frezelenmesinde kesme gücü, özgül kesme enerjisi ve yüzey pürüzlülüǧü karakteristiklerinin belirlenmesi Özerkan H. B., Sucularli F., Genç A. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.37, no.4, pp.2057-2066, 2022 (SCI-Expanded)
Burden of deaths from road traffic injuries in children aged 0-14 years in Turkey ARIKAN ÖZTÜRK E. EASTERN MEDITERRANEAN HEALTH JOURNAL , vol.28, no.4, pp.272-280, 2022 (SCI-Expanded)
Operating Range, Performance and Emissions of an HCCI Engine Fueled with Fusel Oil/Diethyl Ether: An Experimental Study Polat S., CALAM A., Ardebili S. M. S., ŞAHİN F., Boroiu A. A., SOLMAZ H. SUSTAINABILITY , vol.14, no.23, 2022 (SCI-Expanded)
Investigation of the effects of intake manifold pressure on performance and combustion characteristics in an HCCI engine SOLMAZ H., CALAM A., Halis S., İPCİ D., Yilmaz E. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.37, no.4, pp.1735-1749, 2022 (SCI-Expanded)
Antioxidant and anticancer activities of gallic acid loaded sodium alginate microspheres on colon cancer Sağdıçoğlu Celep A. G., Demirkaya A., Solak E. CURRENT APPLIED PHYSICS , vol.40, pp.30-42, 2022 (SCI-Expanded)
Induction motor control system with a Programmable Logic Controller (PLC) and Profibus communication for industrial plants — An experimental setup VADİ S., BAYINDIR R., Toplar Y., Colak I. ISA Transactions , vol.122, pp.459-471, 2022 (SCI-Expanded)
Forecasting the Electricity Capacity and Electricity Generation Values of Wind &Solar Energy with Artificial Neural Networks Approach: The Case of Germany KILIÇ F. APPLIED ARTIFICIAL INTELLIGENCE , vol.36, 2022 (SCI-Expanded)
EFFECT OF THE MQL TECHNIQUE ON CUTTING FORCE AND SURFACE QUALITY DURING THE SLOT MILLING OF TITANIUM ALLOY Osman K. A., YILMAZ V., ÜNVER H. Ö., ŞEKER U., KILIÇ S. E. MATERIALI IN TEHNOLOGIJE , vol.56, no.1, pp.3-10, 2022 (SCI-Expanded)
Analysis of Ranque–Hilsch vortex tube cooling performance in respect of cutting temperature, resultant cutting force and chip morphology in turning of BeCu alloy Çakıroğlu R. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , no.44, pp.2-18, 2022 (SCI-Expanded)
Analysis of EDM machining parameters for keyway on Ti-6Al-4V alloy and modelling by artificial neural network and regression analysis methods Çakıroğlu R. SADHANA - ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.47, no.150, pp.2-17, 2022 (SCI-Expanded)
Analysis and optimisation of the cutting parameters based on machinability factors in turning AISI 4140 steel ÖZDEMİR M., Sahinoglu A., Rafighi M., YILMAZ V. CANADIAN METALLURGICAL QUARTERLY , vol.61, no.4, pp.407-417, 2022 (SCI-Expanded)
Experimental and computational studies of 1,5-diphenyl-pyrazole-3-carboxamide compounds as potential Cannabinoid receptor type 1 Koca I., Yakan M., Capan I., Sahin E., Sert Y. JOURNAL OF MOLECULAR STRUCTURE , vol.1264, pp.1-13, 2022 (SCI-Expanded)
Analysis of halogens in wastewater with a new prepared ion selective electrode Kalaycı Ş. MONATSHEFTE FUR CHEMIE , vol.153, no.12, pp.1137-1141, 2022 (SCI-Expanded)
Multi objective optimization of HCCI combustion fuelled with fusel oil and n-heptane blends Kocakulak T., Babagiray M., NACAK Ç., Safieddin Ardebili S. M., CALAM A., SOLMAZ H. Renewable Energy , vol.182, pp.827-841, 2022 (SCI-Expanded)
Multipurpose acetic acid functionalized carbazole derivatives: Synthesis, electrochemical properties and electrochromic device applications Hacioglu S. O., YİĞİT D., Akbey T. E., UDUM Y., GÜLLÜ M., DEPCİ T., et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY , vol.908, 2022 (SCI-Expanded)
An enhanced finite control set model predictive control method with self-balancing capacitor voltages for three-level T-type rectifiers Bayhan S., Komurcugil H., GÜLER N. IET POWER ELECTRONICS , vol.15, no.6, pp.504-514, 2022 (SCI-Expanded)
Investigation the effect of π bridge and side chain on photovoltaic properties of benzodithiophene and quinoxaline based conjugated polymers Taskaya Aslan S., Alemdar Yılmaz E., Hacıefendioğlu T., UDUM Y., TOPPARE L. K., YILDIRIM E., et al. European Polymer Journal , vol.169, 2022 (SCI-Expanded)
Synthesis, dielectric properties, molecular docking and ADME studies of pyrrole-3-ones Çapan İ., Gümüş M., Gokce H., Çetin H., Sert Y., Koca İ. JOURNAL OF BIOMOLECULAR STRUCTURE & DYNAMICS , vol.40, no.19, pp.8655-8671, 2022 (SCI-Expanded)
Synthesis, DFT study, molecular docking and drug-likeness analysis of the heteroaryl substituted new pregnenolone derivatives ÇAPAN İ., SERT Y., Shehu A., KOCA İ., Servi S. Journal of Molecular Structure , vol.1260, 2022 (SCI-Expanded)
Microstructure engineering for superior wear and impact toughness strength of hypereutectoid powder metallurgy steel Altuntaş O., Güral A., Tekeli S. POWDER METALLURGY , vol.65, no.2, pp.101-111, 2022 (SCI-Expanded)
Equal weighted cost function based weighting factor tuning method for model predictive control in power converters GÜLER N., Bayhan S., Komurcugil H. IET POWER ELECTRONICS , vol.15, no.3, pp.203-215, 2022 (SCI-Expanded)
Exergy analysis in a HCCI engine operated with diethyl ether-fusel oil blends Zapata-Mina J., Ardebili S. M. S., Restrepo A., SOLMAZ H., CALAM A., Can O. CASE STUDIES IN THERMAL ENGINEERING , vol.32, 2022 (SCI-Expanded)
Comprehensive Non-Intrusive Load Monitoring Process: Device Event Detection, Device Feature Extraction and Device Identification Using KNN, Random Forest and Decision Tree GÜRBÜZ F. B., BAYINDIR R., VADİ S. 2021 10th International Conference on Renewable Energy Research and Application (ICRERA) , pp.447-452, 2021 (SCI-Expanded)
Estimating the England Premier League Ranking with Artificial Neural Network Aka H., Aktug Z. B., KILIÇ F. APPLIED ARTIFICIAL INTELLIGENCE , vol.35, no.5, pp.393-402, 2021 (SCI-Expanded)
The effect of the new stopping criterion on the genetic algorithm performance KAYA M., GENÇ A. COMPUTERS AND CONCRETE , vol.27, no.1, pp.63-71, 2021 (SCI-Expanded)
3D-graphene-laser patterned p-type silicon Schottky diode Orhan E., Efil E., Bayram O., Kaymak N., Berberoglu H., Candemir O., et al. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING , vol.121, 2021 (SCI-Expanded)
Indenoquinoxalinone based conjugated polymer substrate for laccase biosensor Cevher S. C., Bekmezci S. A., SaniyeSoylemez S., UDUM Y., TOPPARE L. K., ÇIRPAN A. MATERIALS CHEMISTRY AND PHYSICS , vol.257, 2021 (SCI-Expanded)
Effects of n-heptane/toluene/ethanol ternary fuel blends on combustion, operating range and emissions in premixed low temperature combustion Böğrek A., Haşimoğlu C., CALAM A., Aydoğan B. Fuel , vol.295, 2021 (SCI-Expanded)
Highly conjugated visible and near-infrared light photoinitiating systems for radical and cationic polymerizations Suerkan A., Alkan E. A., Kaya K., UDUM Y., TOPPARE L. K., Yağcı Y. PROGRESS IN ORGANIC COATINGS , vol.154, 2021 (SCI-Expanded)
A New Phosphate Selective Electrode and Its Application in Some Foods Kalaycı Ş. International Journal Of Electrochemical Science , vol.16, pp.1-10, 2021 (SCI-Expanded)
Effect of nitrogen and hydrogen addition on performance and emissions in reactivity controlled compression ignition Bahrami S., Poorghasemi K., SOLMAZ H., CALAM A., İPCİ D. Fuel , vol.292, 2021 (SCI-Expanded)
A comparative analysis of the engine performance and exhaust emissions characteristics of a diesel engine fueled with Mono ethylene glycol supported emulsion Safieddin Ardebili S. M., Calam A., Yılmaz E., Solmaz H. Fuel , vol.288, 2021 (SCI-Expanded)
High Sensitivity Sulphite Membrane Selective Electrode and its Application Kalaycı Ş. Journal Of The Chemical Society Of Pakistan , vol.43, no.4, pp.451-455, 2021 (SCI-Expanded)
Design, implementation and model predictive based control of a mode-changeable DC/DC converter for hybrid renewable energy systems Güler N., Irmak E. ISA TRANSACTIONS , vol.114, pp.485-498, 2021 (SCI-Expanded)
Preparation, characterization, and antibacterial properties of biocompatible material for wound healing KONDOLOT SOLAK E., KAYA S., ASMAN G. JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY , vol.58, no.10, pp.709-716, 2021 (SCI-Expanded)
Modelling of performance, emission, and combustion of an HCCI engine fueled with fusel oil-diethylether fuel blends as a renewable fuel Safieddin Ardebili S. M., SOLMAZ H., CALAM A., İPCİ D. Fuel , vol.290, 2021 (SCI-Expanded)
Prediction of performance and exhaust emissions of a CI engine fueled with multi-wall carbon nanotube doped biodiesel-diesel blends using response surface method Solmaz H., Ardebili S. M. S., Calam A., Yılmaz E., İpci D. Energy , vol.227, 2021 (SCI-Expanded)
An Effective Model Predictive Control Method With Self-Balanced Capacitor Voltages for Single-Phase Three-Level Shunt Active Filters Komurcugil H., Bayhan S., Güler N., Blaabjerg F. IEEE ACCESS , vol.9, pp.103811-103821, 2021 (SCI-Expanded)
Starch-Based Membranes for Controlled Release of 5-Fluorouracil In Vitro Berkkan A., Kondolot Solak E., Asman G. CHEMISTRYSELECT , vol.6, no.23, pp.5678-5684, 2021 (SCI-Expanded)
Analysis of trace elements in Turkish raki by differential pulse polarography Kalaycı Ş., Muhammet S. M. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE , vol.16, no.9, pp.1-10, 2021 (SCI-Expanded)
Light induced step-growth polymerization of Donor-Acceptor-Donor (DAD) type monomers based on thiophene - [1,2,5] Chalcogenazolo[3,4-f]-benzo [1,2,3] triazole - Thiophene Kaya K., Alkan E. A., Yasa M., Suerkan A., UDUM Y., TOPPARE L. K., et al. EUROPEAN POLYMER JOURNAL , vol.161, 2021 (SCI-Expanded)
Model Predictive Control of DC-DC SEPIC Converters With Autotuning Weighting Factor Guler N., Biricik S., Bayhan S., Komurcugil H. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS , vol.68, no.10, pp.9433-9443, 2021 (SCI-Expanded)
Synthesis and investigation of photophysical, NLO and thermal properties of D-π-A-π-D dyes Özarslan A., Çakmaz D., Erol F., Şenöz H., Seferoğlu N., Barsella A., et al. Journal of Molecular Structure , vol.1229, 2021 (SCI-Expanded)
Experimental Investigation on Wire Electric Discharge Machining of Biodegradable AZ91 Mg Alloy Urtekin L., Ozerkan H. B., Cogun C., Genc A., Esen Z., BOZKURT F. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.30, no.10, pp.7752-7761, 2021 (SCI-Expanded)
Effects of the regenerator on engine performance of a rhombic drive beta type stirling engine AKSOY F., SOLMAZ H., ARSLAN M., Yilmaz E., İPCİ D., CALAM A. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , 2021 (SCI-Expanded)
Synthesis of selenophene substituted benzodithiophene and fluorinated benzothiadiazole based conjugated polymers for organic solar cell applications Aslan S. T., Cevher D., Bolayir E., HIZALAN ÖZSOY G., UDUM Y., YILDIRIM E., et al. ELECTROCHIMICA ACTA , vol.398, 2021 (SCI-Expanded)
A modified pencil graphite electrode with 2-thiobarbituric acid for the efficient and cheap voltammetric sensing of 4-aminophenol in water samples and child syrup sample TABANLIGİL CALAM T. JOURNAL OF FOOD COMPOSITION AND ANALYSIS , vol.98, 2021 (SCI-Expanded)
A novel, efficient and sensitive method for the simultaneous determination of riboflavin (vitamin B2) and pyridoxine hydrochloride (vitamin B6) in food and pharmacological samples using an electrochemical sensor based on 4,4 '-diamino benzophenone TABANLIGİL CALAM T. MICROCHEMICAL JOURNAL , vol.169, 2021 (SCI-Expanded)
Improving the impact toughness properties of high carbon powder metallurgy steels with novel spherical cementite in the bainitic matrix (SCBM) microstructures Güral A., Altuntaş O. Materials Chemistry and Physics , vol.259, 2021 (SCI-Expanded)
(1+PD)-PID cascade controller design for performance betterment of load frequency control in diverse electric power systems Celik E., Öztürk N., Arya Y., Ocak C. NEURAL COMPUTING & APPLICATIONS , vol.33, no.22, pp.15433-15456, 2021 (SCI-Expanded)
Machinability Analysis of Inconel 718 Superalloy with AlTiN-Coated Carbide Tool Under Different Cutting Environments ÇAKIROĞLU R. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.46, no.8, pp.8055-8073, 2021 (SCI-Expanded)
ProTOT: Synthesis of the missing member of the 3,4-chalcogen substituted bridged thiophenes and its utilization in donor-acceptor polymers Yaylali F. V., Ozel H., UDUM Y., TOPPARE L. K., SÖYLEMEZ S., GÜNBAŞ E. G. POLYMER , vol.212, 2021 (SCI-Expanded)
Multichromic Vanadium Pentoxide Thin Films Through Ultrasonic Spray Deposition TUTEL Y., DURUKAN M. B., Koc S., KOYLAN S., Cakmak H., Kocak Y., et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY , vol.168, no.10, 2021 (SCI-Expanded)
Selective and Sensitive Determination of Paracetamol and Levodopa with Using Electropolymerized 3,5-diamino-1,2,4-triazole Film on Glassy Carbon Electrode Tabanlıgil Calam T. ELECTROANALYSIS , vol.33, no.4, pp.1049-1062, 2021 (SCI-Expanded)
Effects of three drying methods on kinetics and energy consumption of carrot drying process and modeling with artificial neural networks Kılıç F. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , vol.43, no.12, pp.1468-1485, 2021 (SCI-Expanded)
Characterization of Al-7075/T651 Alloy by RRA Heat Treatment and Different Pre-deformation Effects Altuntaş G., Altuntaş O., Bostan B. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , vol.74, no.12, pp.3025-3033, 2021 (SCI-Expanded)
Formation of boride layers on a commercially pure Ti surface produced via powder metallurgy KAPLAN Y., GÜLSÜN M., AKSÖZ S. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , vol.112, no.4, pp.303-307, 2021 (SCI-Expanded)
Electrochemical determination of 8-hydroxyquinoline in a cosmetic product on a glassy carbon electrode modified with 1-amino-2-naphthol-4-sulphonic acid Tabanlıgil Calam T., Yilmaz E. B. INSTRUMENTATION SCIENCE & TECHNOLOGY , vol.49, no.1, pp.1-20, 2021 (SCI-Expanded)
Organic/metal-organic photosensitizers for dye-sensitized solar cells (DSSC): Recent developments, new trends, and future perceptions Yahya M., BOUZIANI A., Ocak C., Seferoglu Z., Sillanpaa M. DYES AND PIGMENTS , vol.192, 2021 (SCI-Expanded)
Dielectric characteristics and electrical conductivity behavior of graphene/Al2O3/p-type silicon structure Kaymak N., Orhan E., Bayram O., Bilge Ocak S. Materials Chemistry and Physics , vol.258, 2021 (SCI-Expanded)
Operating range, combustion, performance and emissions of an HCCI engine fueled with naphtha Celebi S., Hasimoglu C., Uyumaz A., HALİS S., CALAM A., SOLMAZ H., et al. FUEL , vol.283, 2021 (SCI-Expanded)
Synthesis, DFT Study, Molecular Docking and Drug-Likeness Analysis of the New Hydrazine-1-Carbothioamide, Triazole and Thiadiazole Derivatives: Potential Inhibitors of HSP90 Çapan İ., Servi S., Yıldırım İ., Sert Y. CHEMISTRYSELECT , vol.6, no.23, pp.5838-5846, 2021 (SCI-Expanded)
Estimation of Smooth and Non-smooth Fuel Cost Function Parameters Using Improved Symbiotic Organisms Search Algorithm SÖNMEZ Y., Unal M. JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY , vol.15, no.1, pp.13-25, 2020 (SCI-Expanded)
Synthesis, Characterization, Absorption and Fastness Properties of Novel Monoazo Dyes Derived from 1-Phenyl-3-amino-4-(2-thiazolilazo)pyrazol-5-one Erol F. JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY , vol.31, no.9, pp.1815-1824, 2020 (SCI-Expanded)
Synthesis and characterization of optical, electrochemical and photovoltaic properties of selenophene bearing benzodithiophene based alternating polymers Atli G. O., ALEMDAR E., Aslan S. T., UDUM Y., TOPPARE L. K., ÇIRPAN A. JOURNAL OF ELECTROANALYTICAL CHEMISTRY , vol.862, 2020 (SCI-Expanded)
The determination of uric acid in the presence of ascorbic acid and dopamine using [(1H-1,2,4-triazole-3-ylimino)methyl]naphthalene-2-ol modified platinum electrode Tatli F., TABANLIGİL CALAM T., UZUN D., HASDEMİR E. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.35, no.4, pp.2013-2022, 2020 (SCI-Expanded)
Experimental investigation on the combustion, performance and exhaust emission characteristics of poppy oil biodiesel-diesel dual fuel combustion in a CI engine Uyumaz A., Aydoğan B., Yilmaz E., Solmaz H., Aksoy F., Mutlu İ., et al. FUEL , vol.280, 2020 (SCI-Expanded)
Experimental investigation of the effects of cutting parameters on the cutting surface quality and heat affected area (HAZ) width in plasma arc cutting processes TEKAÜT İ. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.35, no.3, pp.1509-1518, 2020 (SCI-Expanded)
The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine CALAM A., AYDOĞAN B., HALİS S. FUEL , vol.266, 2020 (SCI-Expanded)
Optimization of the operating conditions of a beta-type rhombic drive stirling engine by using response surface method SOLMAZ H., Ardebili S. M. S., AKSOY F., CALAM A., Yilmaz E., ARSLAN M. ENERGY , vol.198, 2020 (SCI-Expanded)
An evaluation of dielectric qualities by using frequency dependence in superbenzene-ring based organic polymer-semiconductors Akay D., Gokmen U., Ocak S. MATERIALS CHEMISTRY AND PHYSICS , vol.245, 2020 (SCI-Expanded)
The effects of diisopropyl ether on combustion, performance, emissions and operating range in a HCCI engine UYUMAZ A., AYDOĞAN B., CALAM A., AKSOY F., YILMAZ E. FUEL , vol.265, 2020 (SCI-Expanded)
The impact of [1,2,5]chalcogenazolo[3,4-f]-benzo[1,2,3]triazole structure on the optoelectronic properties of conjugated polymers Alkan E. A., Goker S., Sarigul H., YILDIRIM E., UDUM Y., TOPPARE L. K. JOURNAL OF POLYMER SCIENCE , vol.58, no.7, pp.956-968, 2020 (SCI-Expanded)
Indirect Sliding Mode Control for DC-DC SEPIC Converters Komurcugil H., Biricik S., Güler N. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS , vol.16, no.6, pp.4099-4108, 2020 (SCI-Expanded)
Investigation of the Effect of Hydrothermal Waters on Radionuclide Activity Concentrations in Natural Marble with Multivariate Statistical Analysis Yalçın F., Unal S., Yalçın M. G., Aktürk Ö., Bilge Ocak S., Özmen S. F. SYMMETRY-BASEL , vol.12, no.8, 2020 (SCI-Expanded)
INVESTIGATION OF ISOBUTANE DEHYDROGENATION ON CrOx/MCM-41 CATALYST Erol Z., Kilicarslan S., Dugan M. MACEDONIAN JOURNAL OF CHEMISTRY AND CHEMICAL ENGINEERING , vol.39, no.1, 2020 (SCI-Expanded)
A new ethanol biosensor based on polyfluorene-g-poly(ethylene glycol) and multiwalled carbon nanotubes Bekmezci S. A., SÖYLEMEZ S., Yilmaz G., UDUM Y., Yağcı Y., TOPPARE L. K. EUROPEAN POLYMER JOURNAL , vol.122, 2020 (SCI-Expanded)
Voltammetric determination and electrochemical behavior of vanillin based on 1H-1,2,4-triazole-3-thiol polymer film modified gold electrode Tabanlıgil Calam T. FOOD CHEMISTRY , vol.328, 2020 (SCI-Expanded)
Electrochemical Oxidative Determination and Electrochemical Behavior of 4-nitrophenol Based on an Au Electrode Modified with Electro-polymerized 3,5-diamino-1,2,4-triazole Film Tabanlıgil Calam T. ELECTROANALYSIS , vol.32, no.1, pp.149-158, 2020 (SCI-Expanded)
Narrow band gap benzodithiophene and quinoxaline bearing conjugated polymers for organic photovoltaic applications Caliskan M., ERER M. C., Aslan S. T., UDUM Y., TOPPARE L. K., ÇIRPAN A. DYES AND PIGMENTS , vol.180, 2020 (SCI-Expanded)
Design and Simulation of a Grid Connected Wind Turbine with Permanent Magnet Synchronous Generator VADİ S., GÜRBÜZ F. B., BAYINDIR R., HOSSAIN E. 2020 8th International Conference on Smart Grid (icSmartGrid) , pp.169-175, 2020 (SCI-Expanded)
Effects of temperature and frequency on capacitance and conductance characteristics of zinc-oxide based MIS-Structure Kaymak N., Efil E., Seven E., Tataroğlu A., Bilge Ocak S., Orhan E. PHYSICA B-CONDENSED MATTER , vol.576, 2020 (SCI-Expanded)
ELECTROCHEMICAL SMALL DIAMETER DEEP HOLE DRILLING OF POWDER METAL STEEL ÖZERKAN H. B., Cogun C. TRANSACTIONS OF FAMENA , vol.44, no.4, pp.47-58, 2020 (SCI-Expanded)
Electrical properties of Graphene/Silicon structure with Al2O3 interlayer Kaymak N., Bayram Ö., Tataroğlu A., Bilge Ocak S., Orhan E. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , vol.31, no.12, pp.9719-9725, 2020 (SCI-Expanded)
Study on the combustion characteristics of acetone/n-heptane blend and RON50 reference fuels in an HCCI engine at different compression ratios CALAM A. FUEL , vol.271, 2020 (SCI-Expanded)
An Experimental Research on the Effects of Negative Valve Overlap on Performance and Operating Range in a Homogeneous Charge Compression Ignition Engine With RON40 and RON60 Fuels POLAT S., SOLMAZ H., UYUMAZ A., CALAM A., Yilmaz E., YÜCESU H. S. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME , vol.142, no.5, 2020 (SCI-Expanded)
Analysis of intermittent infrared drying using heat recovery with a novel control methodology Dolgun E. C., Karaca G., AKTAŞ M., KILIÇ F. JOURNAL OF FOOD PROCESS ENGINEERING , vol.43, no.10, 2020 (SCI-Expanded)
Construction of amperometric biosensor modified with conducting polymer/carbon dots for the analysis of catechol Yasa M., Deniz A., Forough M., YILDIRIM E., PERSİL ÇETİNKOL Ö., UDUM Y., et al. JOURNAL OF POLYMER SCIENCE , vol.58, no.23, pp.3336-3348, 2020 (SCI-Expanded)
A comprehensive study: Theoretical and experimental investigation of heteroatom and substituent effects on frontier orbitals and polymer solar cell performances Cevher S. C., Hizalan G., ALEMDAR E., Cevher D., Udum Arslan Y., TOPPARE L. K., et al. JOURNAL OF POLYMER SCIENCE , vol.58, no.19, pp.2792-2806, 2020 (SCI-Expanded)
Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel ÇAKIROĞLU R., GÜNAY M. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , vol.9, no.4, pp.7305-7317, 2020 (SCI-Expanded)
Ionizing Radiation Influence on Rubrene-Based Metal Polymer Semiconductors: Direct Information of Intrinsic Electrical Properties Akay D., Gokmen U., Ocak S. JOM , vol.72, no.6, pp.2391-2397, 2020 (SCI-Expanded)
A Review of Control Methods on Suppression of 2 < italic >& x03C9;</italic > Ripple for Single-Phase Quasi-Z-Source Inverter VADİ S., BAYINDIR R., Hossain E. IEEE ACCESS , vol.8, pp.42055-42070, 2020 (SCI-Expanded)
Synthesis of New C2-Symmetric Chiral Benzimidazole Derivatives Having Norbornene/Dibenzobarrelene Skeletons ÇAPAN İ., SERVİ S. LETTERS IN ORGANIC CHEMISTRY , vol.17, no.10, pp.801-805, 2020 (SCI-Expanded)
The investigation of sintering temperature and Ni interlayer effects on diffusion bonding in inserted metal injection molding SUBAŞI M. JOURNAL OF MANUFACTURING PROCESSES , vol.58, pp.706-711, 2020 (SCI-Expanded)
Synthesis and Anticancer Evaluation of Benzimidazole Derivatives Having Norbornene/Dibenzobarrelene Skeletons and Different Functional Groups ÇAPAN İ., Servi S., Dalkilic S., Dalkilic L. K. CHEMISTRYSELECT , vol.5, no.45, pp.14393-14398, 2020 (SCI-Expanded)
TUNING THE ELECTRICAL PROPERTIES WITH HIGHER GAMMA-RAY IRRADIATION: POLY (METHYL METHACRYLATE)/LEAD OXIDE (PbO) COMPOSITE NANOSTRUCTURES Akay D., Ocak S. SURFACE REVIEW AND LETTERS , vol.27, no.6, 2020 (SCI-Expanded)
Electrosynthesis and characterizations of electrochromic and soluble polymer films based on N- substituted carbazole derivates Elkhidr H. E., ERTEKİN Z., UDUM Y., PEKMEZ K. SYNTHETIC METALS , vol.260, 2020 (SCI-Expanded)
Investigation of the electrochemical behavior of phenol using 1H-1, 2, 4-triazole-3-thiol modified gold electrode and its voltammetric determination Tabanlıgil Calam T. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.35, no.2, pp.835-844, 2020 (SCI-Expanded)
Current voltage analyses of Graphene-based structure onto Al2O3/p-Si using various methods Efil E., Kaymak N., Seven E., Orhan E., Bayram Ö., Bilge Ocak S., et al. VACUUM , vol.181, 2020 (SCI-Expanded)
Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic OZDEN S., KILIÇ F. FOOD SCIENCE AND TECHNOLOGY , vol.40, no.3, pp.635-643, 2020 (SCI-Expanded)
Group decision making for hazard analysis and consequence modelling software selection with ahp Çetinyokuş S., Çalışkan E., Aksakal E., Çetinyokuş T. Iranian Journal of Chemistry and Chemical Engineering , vol.39, pp.303-318, 2020 (SCI-Expanded)
Experimental and theoretical studies on monoazo dye including diphenylamine and N -methyldiphenylamine derivatives Aksungur T., Erol F., Seferoğlu N., Seferoğlu Z. JOURNAL OF MOLECULAR STRUCTURE , vol.1217, 2020 (SCI-Expanded)
A model predictive control-based hybrid MPPT method for boost converters Irmak E., Güler N. INTERNATIONAL JOURNAL OF ELECTRONICS , vol.107, no.1, pp.1-16, 2020 (SCI-Expanded)
A review on higher alcohol of fusel oil as a renewable fuel for internal combustion engines: Applications, challenges, and global potential Ardebili S. M. S., SOLMAZ H., İPCİ D., CALAM A., Mostafaei M. FUEL , vol.279, 2020 (SCI-Expanded)
Investigation of functional core-rim composite part production by inserted powder injection moulding Subasi M., Koçak H., Safarian A., Karataş Ç. MATERIALS SCIENCE AND TECHNOLOGY , vol.36, pp.293-298, 2020 (SCI-Expanded)
Multi-Input Multi-Output-Based Sliding-Mode Controller for Single-Phase Quasi-Z-Source Inverters Bagheri F., Komurcugil H., Kukrer O., Güler N., Bayhan S. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS , vol.67, no.8, pp.6439-6449, 2020 (SCI-Expanded)
Effects of the fusel oil usage in HCCI engine on combustion, performance and emission CALAM A. FUEL , vol.262, 2020 (SCI-Expanded)
Preparation and characterization of 3-[(1H-1,2,4-triazole-3-ylimino)methyl]naphtalene-2-ol film at the platinum surface for selective voltammetric determination of dopamine in the presence of uric acid and ascorbic acid Tatli F., Uzun D., Tabanlıgil Calam T., Balaban Gündüzalp A., Hasdemir E. SURFACE AND INTERFACE ANALYSIS , vol.51, no.4, pp.475-483, 2019 (SCI-Expanded)
EFFECTS OF INTAKE AIR TEMPERATURE ON COMBUSTION AND PERFORMANCE OF A HCCI ENGINE CALAM A., Icingur Y. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.39, no.1, pp.69-79, 2019 (SCI-Expanded)
Electrical, optical and structural properties of silver-based multilayer films deposited by magnetron sputtering Gumrukcu A. E., Kaplan H., AKIN SÖNMEZ N., ÖZÇELİK S. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , vol.30, no.20, pp.18519-18523, 2019 (SCI-Expanded)
Transient analysis with coupled field-circuit model and experimental assessment of a PMSG used in small-scale wind turbine for water heating purpose Çetinceviz Y., Şehirli E., Uygun D., Ocak C., Demirel H. ELECTRICAL ENGINEERING , vol.101, no.4, pp.1163-1175, 2019 (SCI-Expanded)
Electrical characteristics analyses of zinc-oxide based MIS structure grown by atomic layer deposition Kaymak N., Efil E., Seven E., Tataroğlu A., Bilge S., Orhan E. MATERIALS RESEARCH EXPRESS , vol.6, no.2, 2019 (SCI-Expanded)
A multipurpose conjugated polymer: Electrochromic device and biosensor construction for glucose detection Soylemez S., Kaya H. Z., UDUM Y., TOPPARE L. K. ORGANIC ELECTRONICS , vol.65, pp.327-333, 2019 (SCI-Expanded)
Development of MgO:TiO2 thin films for gas sensor applications Sertel B. C., AKIN SÖNMEZ N., Kaya M., ÖZÇELİK S. Ceramics International , vol.45, no.3, pp.2917-2921, 2019 (SCI-Expanded)
Controlled release of huperzine-A from biocompatible copolymer microspheres KONDOLOT SOLAK E., ASMAN G., MUHAMMET S. M. BULLETIN OF MATERIALS SCIENCE , vol.42, no.2, 2019 (SCI-Expanded)
FABRICATION AND SIMULATION OF FEEDSTOCK FOR TITANIUM-POWDER INJECTION-MOLDING CORTICAL-BONE SCREWS Urtekin L., GENÇ A., Bozkurt F. MATERIALI IN TEHNOLOGIJE , vol.53, no.5, pp.619-625, 2019 (SCI-Expanded)
Radiation-induced changes on poly(methyl methacrylate) (PMMA)/lead oxide (PbO) composite nanostructure Akay D., Gökmen U., Ocak S. PHYSICA SCRIPTA , vol.94, no.11, 2019 (SCI-Expanded)
Designing spherical cementite in bainitic matrix (SCBM) microstructures in high carbon powder metal steels to improve dry sliding wear resistance Altuntaş O., Güral A. MATERIALS LETTERS , vol.249, pp.185-188, 2019 (SCI-Expanded)
Syntheses and Characterization of Benzotriazole, Thienopyrroledione, and Benzodithiophene Containing Conjugated Random Terpolymers for Organic Solar Cells Goksu K., Hizalan G., UDUM Y., Hacioglu S. O., Cevher S. C., Akrema A., et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY , vol.166, no.15, 2019 (SCI-Expanded)
Influences of annealing temperature on amorphous Ta2O5 thin films anti-reflective performance of Sertel T., AKIN SÖNMEZ N., Cetin S. Ş., ÖZÇELİK S. CERAMICS INTERNATIONAL , vol.45, no.1, pp.11-18, 2019 (SCI-Expanded)
Rapid and Selective Determination of Vanillin in the Presence of Caffeine, its Electrochemical Behavior on an Au Electrode Electropolymerized with 3-amino-1,2,4-triazole-5-thiol Tabanlıgil Calam T., Uzun D. ELECTROANALYSIS , vol.31, no.12, pp.2347-2358, 2019 (SCI-Expanded)
A Review on Communication Standards and Charging Topologies of V2G and V2H Operation Strategies VADİ S., BAYINDIR R., Colak A. M., Hossain E. ENERGIES , vol.12, no.19, 2019 (SCI-Expanded)
Cubic MgZnO thin films on sapphire substrate: effect of deposition temperature AKIN SÖNMEZ N. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , vol.30, no.4, pp.4104-4110, 2019 (SCI-Expanded)
The Effects of Friction Coefficient on Formability Behaviour of Dual Phase Steel TEKAÜT İ. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS , vol.22, no.5, 2019 (SCI-Expanded)
A thiazolothiazole containing multichromic polymer for glucose detection Soylemez S., Kaya H. Z., Udum Y., TOPPARE L. K. EXPRESS POLYMER LETTERS , vol.13, no.10, pp.845-857, 2019 (SCI-Expanded)
Investigation of effect of compression ratio on combustion and exhaust emissions in A HCCI engine CALAM A., SOLMAZ H., YILMAZ E., Icingur Y. ENERGY , vol.168, pp.1208-1216, 2019 (SCI-Expanded)
Hybrid Use of Likert Scale-Based AHP and PROMETHEE Methods for Hazard Analysis and Consequence Modeling (HACM) Software Selection ÇALIŞKAN E., AKSAKAL E., ÇETİNYOKUŞ S., ÇETİNYOKUŞ T. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING , vol.18, no.5, pp.1689-1715, 2019 (SCI-Expanded)
The effects of annealing temperature on RF-coated GZO thin films on n-Si and PET substrates N-Si ve PET alttaşlar üzerine RF-kaplanan GZO ince filmlere tavlama sicakliǧinin etkileri AKIN SÖNMEZ N., Donmez M., Comert B., ASAR T., KINACI B., ÖZÇELİK S. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.34, no.4, pp.1757-1763, 2019 (SCI-Expanded)
Tuning molecular energy levels and band gap of two-dimensional benzo[1,2-b:4,5-b '] dithiophene and quinoxaline bearing polymers Yasa M., Goker S., UDUM Y., TOPPARE L. K. JOURNAL OF ELECTROANALYTICAL CHEMISTRY , vol.847, 2019 (SCI-Expanded)
The investigation of production parameters of Ti-6Al-4V component by powder injection molding SUBAŞI M., Safarian A., KARATAŞ Ç. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.105, no.11, pp.4747-4760, 2019 (SCI-Expanded)
Mapping of an HCCI engine using negative valve overlap strategy POLAT S., SOLMAZ H., YILMAZ E., CALAM A., UYUMAZ A., YÜCESU H. S. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , 2019 (SCI-Expanded)
Analytical application of the poly(1H-1,2,4-triazole-3-thiol) modified gold electrode for high-sensitive voltammetric determination of catechol in tap and lake water samples Tabanlıgil Calam T. INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY , vol.99, no.13, pp.1298-1312, 2019 (SCI-Expanded)
COMPARATIVE CHARACTERIZATIONS OF SELF-ASSEMBLED MONOLAYERS OF 1,6-HEXANEDITHIOL AND 1-HEXANETHIOL FORMED ON POLYCRYSTALLINE GOLD ELECTRODE Tabanlıgil Calam T., Hasdemir E. COMPTES RENDUS DE L ACADEMIE BULGARE DES SCIENCES , vol.72, no.3, pp.316-326, 2019 (SCI-Expanded)
Experimental fatigue life determination of thermo-diffusion surface boronized of AISI 1040 steel ÖZERKAN H. B. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.33, no.10, pp.4957-4962, 2019 (SCI-Expanded)
Synthesis of Indole and Benzimidazole Substituted Novel 16-Arylidene Steroid Derivatives Karatas S., ÇAPAN İ., SERVİ S. LETTERS IN ORGANIC CHEMISTRY , vol.16, no.11, pp.884-890, 2019 (SCI-Expanded)
Determination of Sulfite in Wine Using Differential Pulse Polarography Somer G., KALAYCI Ş., Yilmaz U. RUSSIAN JOURNAL OF ELECTROCHEMISTRY , vol.55, no.12, pp.1360-1365, 2019 (SCI-Expanded)
An investigation on characteristics and rheological behaviour of titanium injection moulding feedstocks with thermoplastic-based binders SUBAŞI M., Safarian A., KARATAŞ Ç. POWDER METALLURGY , vol.62, no.4, pp.229-239, 2019 (SCI-Expanded)
Frequency dependent dielectric properties of atomic layer deposition grown zinc-oxide based MIS structure Efil E., Kaymak N., Seven E., Tataroglu A., Ocak S., Orhan E. PHYSICA B-CONDENSED MATTER , vol.568, pp.31-35, 2019 (SCI-Expanded)
Sinter bonding of AISI 4340 and WC-Co using Ni interlayer by inserted powder injection molding Koçak H., Subaşı M., Karataş Ç. CERAMICS INTERNATIONAL , vol.45, no.17, pp.22331-22335, 2019 (SCI-Expanded)
A Review on Optimization and Control Methods Used to Provide Transient Stability in Microgrids VADİ S., Padmanaban S., BAYINDIR R., Blaabjerg F., Mihet-Popa L. ENERGIES , vol.12, no.18, 2019 (SCI-Expanded)
THEORETICAL EVALUATION OF THE EFFECT OF SURFACES PROCESSED WITH ABRASIVE WATER JET ON FATIGUE LIFE TEKAÜT İ. TRANSACTIONS OF FAMENA , vol.43, no.2, pp.85-98, 2019 (SCI-Expanded)
Ag/M-seed/AZO/glass structures for low-E glass: Effects of metal seeds AKIN SÖNMEZ N., Donmez M., Comert B., ÖZÇELİK S. International Journal of Applied Glass Science , vol.9, no.3, pp.383-391, 2018 (SCI-Expanded)
Symbiotic organisms search algorithm for economic load dispatch problem with valve-point effect Guvenc U., Dumana S., Sonmez Y., KAHRAMAN H. T., Dosoglu M. K. SCIENTIA IRANICA , vol.25, no.6, pp.3490-3506, 2018 (SCI-Expanded)
Study of frequency dependent characterization: applied gamma-ray irradiation on metal-polymer nanostructure Akay D., Efil E., Kaymak N., Orhan E., Ocak S. JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY , vol.318, no.2, pp.1409-1417, 2018 (SCI-Expanded)

Published journal articles indexed by SCI, SSCI, and AHCI