Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

The design process of the complex Special Utility Vehicle using the methodical design approach

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, vol.13, no.4, 2019 (Journal Indexed in SCI) Creative Commons License identifier identifier

Continuous Wave Fibre Laser Drilling of High Aspect Ratio Holes in Ni-based Alloys

LASERS IN ENGINEERING, vol.39, pp.281-291, 2018 (Journal Indexed in SCI) identifier identifier

A practical application for machine design education

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, vol.12, no.2, 2018 (Journal Indexed in SCI) Creative Commons License identifier identifier

Numerical investigation on laser stripping of thermal barrier coating

COMPUTATIONAL MATERIALS SCIENCE, vol.88, pp.131-138, 2014 (Journal Indexed in SCI) identifier identifier

Nano-second pulsed DPSS Nd:YAG laser striation-free cutting of alumina sheets

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol.53, no.1, pp.15-26, 2012 (Journal Indexed in SCI) identifier identifier

CO2 laser underwater machining of deep cavities in alumina

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, vol.31, no.15, pp.2793-2807, 2011 (Journal Indexed in SCI) identifier identifier

Experimental and theoretical investigation of fibre laser crack-free cutting of thick-section alumina

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol.51, no.12, pp.859-870, 2011 (Journal Indexed in SCI) identifier identifier

The effect of moisture content in fibre laser cutting of pine wood

OPTICS AND LASERS IN ENGINEERING, vol.49, pp.1139-1152, 2011 (Journal Indexed in SCI) Sustainable Development identifier identifier

Single and dual gas jet effect in Ytterbium-doped fibre laser cutting of dry pine wood

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.56, pp.539-552, 2011 (Journal Indexed in SCI) identifier identifier

Dual gas jet-assisted fibre laser blind cutting of dry pine wood by statistical modelling

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.50, pp.195-206, 2010 (Journal Indexed in SCI) Sustainable Development identifier identifier

Nano-second pulsed DPSS Nd:YAG laser cutting of CFRP composites with mixed reactive and inert gases

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.49, pp.553-566, 2010 (Journal Indexed in SCI) identifier identifier

Recast and oxide formation in laser-drilled acute holes in CMSX-4 nickel single-crystal superalloy

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, vol.224, pp.1005-1016, 2010 (Journal Indexed in SCI) identifier identifier

Twin gas jet-assisted laser drilling through thermal barrier-coated nickel alloy substrates

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol.49, no.14, pp.1126-1135, 2009 (Journal Indexed in SCI) identifier identifier

Mechanisms of Acute Angle Laser Drilling Induced Thermal Barrier Coating Delamination

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, vol.131, no.5, 2009 (Journal Indexed in SCI) identifier identifier

Statistical analysis of recast formation in laser drilled acute blind holes in CMSX-4 nickel superalloy

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.43, pp.1094-1105, 2009 (Journal Indexed in SCI) identifier identifier

Statistical analysis of ytterbium-doped fibre laser cutting of dry pine wood

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, vol.223, no.7, pp.775-789, 2009 (Journal Indexed in SCI) Sustainable Development identifier identifier

Non-destructive microwave evaluation of TBC delamination induced by acute angle laser drilling

MEASUREMENT SCIENCE AND TECHNOLOGY, vol.18, no.1, pp.167-175, 2007 (Journal Indexed in SCI) identifier identifier

Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol.46, no.15, pp.1972-1982, 2006 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

ADDITIVE MANUFACTURING OF MICROFLUIDIC LAB-ON-A-CHIP DEVICES

International Journal of 3D Printing Technologies and Digital Industry, vol.5, no.3, pp.692-708, 2021 (Other Refereed National Journals)

Tersine Mühendislik Tasarımı: Endüstriyel Tasarım Mühendisliği Lisans Öğrencileri İçin Teknik Seçmeli Ders

International Journal of 3D Printing Technologies and Digital Industry, vol.2, no.3, pp.1-11, 2018 (Refereed Journals of Other Institutions)

Implementing 3D Printed Structures as the Newest Textile Form

Journal of Fashion Technology Textile Engineering, vol.0, no.4, pp.1-7, 2018 (Refereed Journals of Other Institutions)

A Novel Conceptual Design of a Stairlift for Elderly and Disabled People

Gazi University Journal of Science Part A: Engineering And Innovation, vol.5, no.1, pp.17-29, 2018 (Refereed Journals of Other Institutions)

Topolojik nesnelerin FDM yöntemiyle üretimi”, International Journal of 3D Printing Technologies and Digital Industry

International Journal of 3D Printing Technologies and Digital Industry, vol.2, pp.76-87, 2018 (Refereed Journals of Other Institutions)

KUYUMCULUK SEKTÖRÜNDE 3B BASKI TASARIM ÖZGÜRLÜĞÜNDEN FAYDALANMAYA İLİŞKİN BİR PERSPEKTİF

International Journal of 3D Printing Technologies and Digital Industry, vol.2, no.2, pp.46-58, 2018 (Refereed Journals of Other Institutions)

Current 3 Dimensional Printing Technologies Used in Scaffold Design in Tissue Engineering

Düzce University Journal of Science Technology, vol.5, no.2, pp.548-564, 2017 (Other Refereed National Journals)

Short Review on Laser Texturing and Cleaning Carbon Fibre Composites for Aerospace Applications

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, vol.19, no.4, pp.623-631, 2016 (Journal Indexed in ESCI) identifier

Hızlı Prototip Oluşturmada Karşılaşılan Problemler Ve Çözüm Önerileri

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, vol.4, no.4, pp.309-319, 2016 (Refereed Journals of Other Institutions)

Refereed Congress / Symposium Publications in Proceedings

Analytical Modelling of Heat Distribution in Powder Bed Fusion Process

Innovative Approaches in Additive Manufacturing Congress (IA4AM), Ankara, Turkey, 16 July 2021, pp.17-24

Üretken Tasarım ve Topoloji Optimizasyonu Yaklaşımlarıyla Ürün Tasarımı

Uluslararası Bilim, Teknoloji Ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.2, pp.251-262

3 Boyutlu Yazıcıların Medikal Uygulamaları ve Ayak Bileği Ortez Üretimi

Uluslararası Bilim, Teknoloji Ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.1, pp.376-391

FDM Yazıcı ile Küresel Vana Prototip Çalışması

Uluslararası Bilim, Teknoloji Ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.2, pp.263-272

Lazer Eklentili Ergiyik Biriktirme (FDM) Yöntemiyle Kompozit Parça Üretimi

Uluslararası Bilim, Teknoloji Ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.1, pp.367-375

Tekstil Sektörüne Eklemeli İmalat Yaklaşımı: 3B Yazıcılar İle Deneysel Çalışma

Uluslararası Bilim, Teknoloji Ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.1, pp.411-419

Generative Herringbone Gear Design for Additive Manufacturing

II International Turkish Word Engineering and Science Congress, Antalya, Turkey, 7 - 10 November 2019, vol.3, pp.758-766

State of The Art in Laser Drilling of Aerospace Materials

II International Turkish Word Engineering and Science Congress, Antalya, Turkey, 7 - 10 November 2019, vol.3, pp.767-773

Additive Manufacturing of Sensors

II International Turkish Word Engineering and Science Congress, Antalya, Turkey, 7 - 10 November 2019, vol.3, pp.746-757

TRIZ Yaklaşımı ile 3D Yazıcı Ekstruderı Tasarımı

İSİDE-2018, Antalya, Turkey, 22 - 24 November 2018, pp.634-641

Kompozitlerin Eklemeli İmalatı: Uygulama Alanları

3’xxrd International Symposium on Industrial Design Engineering (ISIDE 2018), 22 - 24 November 2018

Kompozitlerin Eklemeli İmalatı: Üretim Metodolojisi, Baskı Teknikleri ve Kullanılabilir Malzemeler

3’xxrd International Symposium on Industrial Design Engineering (ISIDE 2018), 22 - 25 November 2018

A Perspective On Exploiting The Design Freedom Of 3d Printers In Jewellery Industry

3rd International Congress on 3D Printing Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018

3d Printing Of Multifunctional Nanocomposites With Enhanced Electrical Properties

3rd International Congress on 3D Printing Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018

State Of The Art In Applications Of 3d-Prototyping In Automotive Industry With Case Studies

3rd International Congress on 3D Printing Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018

Topolojik Nesnelerin FDM Yöntemiyle Üretimi

3’rd International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry, Antalya, Turkey, 19 April 2018 - 21 April 2019

Reverse Engineering Design: Industrial Design Engineering Technical Elective Course For Undergraduate Students

3rd International Congress on 3D Printing Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018

Design And Manufacture Of Customised Toys Utilising Low Cost Fdm 3d Printers

3rd International Congress on 3D Printing Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018

Hıgh Speed Manufacture Of A Geotextıle Through Nanosecond Pulsed Laser Transmısson Weldıng Process

1st International Turkish World Engineering and Science Congress, 7 - 10 December 2017

Bio-Fabrication Via Laser-Induced Forward Transfer

1st International Turkish World Engineering and Science Congress, 7 - 10 December 2017

Implementing 3D printed structures as the newest textile form

International Conference on Intelligent Textiles and Mass Customisation ITMC2017, Ghent, Belgium, 15 - 18 October 2017

Conceptual Design of A New Stair Lift For Eldery and Disabled People

2nd Inter. Sym. on Industrial Design Engineering, Nevşehir, Turkey, 13 - 15 September 2017 Sustainable Development

3D Printing of Graphene Composites

2nd International Symposium on Industrial Design Engineering (ISIDE 17), 13 - 15 September 2017

The Design of a Low-Cost Set-Up for Manufacturing The Stent

2nd International Symposium on Industrial Design Engineering (ISIDE 17), 13 - 15 September 2017

Conceptual Design of a Novel Stair Lift for Elderly and Disabled People

2nd International Symposium on Industrial Design Engineering (ISIDE 17), 13 - 15 September 2017 Sustainable Development

Enhanced Mechanical and Electrical Properties of 3D Printed MWCNT Re-inforced ABS Nano-Composite Parts

39th International MATADOR Conference on Advanced Manufacturing, Manchester, United Kingdom, 5 - 07 July 2017

Current 3D Dimensional Printing Technologies Used İn Scaffold Design İn Tissue Engineering

2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3 - 04 April 2017

Karbon Fiber Takviyeli ABS Filament Üretimi ve Mekanik Özelliklerinin Araştırılması

International Symposium On 3D Printing Technologies, İstanbul, Turkey, 5 - 08 May 2016, pp.138-148

Hızlı Prototip Oluşturmada Karşılaşılan Problemler Ve Çözüm Önerileri

International Symposium on 3D Printing Technologies (3DPTS2016), 5 - 07 May 2016, pp.111-122

Karbon Fiber Takviyeli Abs Filament Üretimi Ve Mekanik Özelliklerinin Araştırılması

International Symposium on 3D Printing Technologies (3DPTS2016), İstanbul, Turkey, 5 - 07 May 2016, pp.138-148

HIZLI PROTOTİP OLUŞTURMADA KARŞILAŞILAN PROBLEMLER VE ÇÖZÜM ÖNERİLERİ

1. 3B BASKI TEKNOLOJİLERİ ULUSLARARASI SEMPOZYUMU (3B-BTS2016), İstanbul, Turkey, 5 - 07 May 2016, vol.1, pp.111-122

KARBON FİBER TAKVİYELİ ABS FİLAMENT ÜRETİMİ VE MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI

1. 3B BASKI TEKNOLOJİLERİ ULUSLARARASI SEMPOZYUMU (3B-BTS2016), İstanbul, Turkey, 5 - 07 May 2016, vol.1, pp.138-148

Process characteristics of single mode fibre laser net shape welding

PICALO 2010, 4th Pacific International Conference on Applications of Lasers and Optics (PICALO 2010), 23 - 25 March 2010

Oxide formation in acute laser percussion drilled holes in single crystal nickel superalloy

ICALEO 2009 - 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, Orlando, United States Of America, 2 - 05 November 2009

The effect of moisture content and tracheids orientation in fibre laser cutting of dry and wet pine wood

ICALEO 2009 - 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings, Orlando, United States Of America, 2 - 05 November 2009

The Effect of Powder Recycling in Direct Metal Laser Deposition on Powder and Manufactured Part Characteristics

NATO Specialists Meeting AVT-139 ’xxCost Effective Manufacture via Net Shape Processing’xx, 01 January 2006, pp.181-188

Effect of beam angle on heat affected zone recast and oxide layer in laser drilling of thermal barrier coated nickel alloys

ICALEO 2005, 24th International Congress on Applications of Lasers and Electro-Optics, - Congress Proceedings, Miami, United States Of America, 31 October - 03 November 2005

The effect of gas jet and melt flow on laser drilling of thermal barrier coated nickel alloys

ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings, 4 - 07 October 2004