Biography

Doç. Dr. Hacı Bekir Özerkan received his undergraduate degree from Karadeniz Technical University, Department of Mechanical Engineering in 1999 and also received his Ph.D. Degree in 2010 and MSc Degree in 2003 from the Department of Mechanical Engineering of Gazi University. Non-traditional and conventional machining methods, cutting tools, powder metallurgy, materials testing, mechanic of materials, machine design are some of the research areas of him. 

Learning Knowledge


Doctorate
2003 - 2010
Gazi University, Fen Bilimleri Enstitüsü, Makine Mühendisliği (Dr), Turkey

Postgraduate
2002 - 2003
Gazi University, Fen Bilimleri Enstitüsü, Makine Mühendisliği (Yl) (Tezli), Turkey

Undergraduate
1994 - 1999
Karadeniz Technical University, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Turkey

Dissertations

Doctorate, Delikli döner elektrot kullanarak elektrokimyasal delme yönteminin geliştirilmesi ve deneysel incelenmesi, Gazi University, Fen Bilimleri Enstitüsü, Makine Mühendisliği (Dr), 2010
Postgraduate, Elektro erozyon ile işlemede toz karışımlı dielektrik sıvının işleme performansına etkisinin deneysel incelenmesi, Gazi University, Fen Bilimleri Enstitüsü, Makine Mühendisliği (Yl) (Tezli), 2003

Academic Titles / Tasks


Associate Professor
2021 - Continues
Gazi University, Mühendislik Fakültesi, Makina Mühendisliği

Associate Professor
2020 - 2021
Gazi University, Teknik Bilimler Meslek Yüksekokulu, Makine Ve Metal Teknolojileri Bölümü

Lecturer PhD
2015 - 2020
Gazi University, Teknik Bilimler Meslek Yüksekokulu, Makine Ve Metal Teknolojileri Bölümü

Lecturer PhD
2010 - 2016
Gazi University, Atatürk Meslek Yüksekokulu, Makina Ve Metal Teknolojisi

Lecturer
2005 - 2010
Gazi University, Atatürk Meslek Yüksekokulu, Makina Ve Metal Teknolojisi

Supported Projects

  1. Özdemir V., Özerkan H. B. , Genç A., Project Supported by Higher Education Institutions, Z-NC Elektro erezyon tezgahı tasarımı ve üretimi, 2019 - 2019
  2. ÖZERKAN H. B. , AKKURT A., DİLİPAK H., KURT A., ŞEKER U., Industrial Thesis Project, Karbon Fiber Takviyeli Kompozit Malzemlerinin İşlenmesi için Kesici Takım Tasarımı Üretimi ve Performans Kriterlerinin Belirlenmesi, 2013 - 2016
  3. Çoğun C., Uslan İ., Özerkan H. B. , Urtekin L., Erdem O., TUBITAK Project, Elektro Erozyon İle İşlemede Döner Elektrot İle Küçük Çaplı Delik Delmede Dielektrik Sıvısına Karıştırılan Tozların ve Isıtmanın Yüzey Pürüzlülüğüne Etkisinin Deneysel Araştırılması, 2012 - 2013

Jury Memberships

Post Graduate, Post Graduate, Kırşehir Ahi Evran Üniversitesi, January, 2021

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

  1. The cutting power, specific cutting energy and surface roughness characterization in milling of 8740 steel
    Özerkan H. B. , Sucularlı F., Genç A.
    Journal Of The Faculty Of Engineering And Architecture Of Gazi University, vol.37, no.4, pp.2057-2066, 2022 (Journal Indexed in SCI Expanded)
  2. The effect of cutting depth and cutting tool geometry on surface roughness and tool wear behavior in the machining of Al 6061 alloy
    Pul M., Özerkan H. B.
    Journal Of The Faculty Of Engineering And Architecture Of Gazi University, vol.37, no.4, pp.2013-2024, 2022 (Journal Indexed in SCI Expanded)
  3. Experimental Investigation on Wire Electric Discharge Machining of Biodegradable AZ91 Mg Alloy
    Urtekin L., Ozerkan H. B. , Cogun C., Genc A., Esen Z., BOZKURT F.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021 (Journal Indexed in SCI)
  4. ELECTROCHEMICAL SMALL DIAMETER DEEP HOLE DRILLING OF POWDER METAL STEEL
    ÖZERKAN H. B. , Cogun C.
    TRANSACTIONS OF FAMENA, vol.44, no.4, pp.47-58, 2020 (Journal Indexed in SCI)
  5. Experimental fatigue life determination of thermo-diffusion surface boronized of AISI 1040 steel
    ÖZERKAN H. B.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.33, no.10, pp.4957-4962, 2019 (Journal Indexed in SCI)
  6. Simultaneous machining and surface alloying of AISI 1040 steel by electrical discharge machining with boron oxide powders
    ÖZERKAN H. B.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.32, no.9, pp.4357-4364, 2018 (Journal Indexed in SCI)
  7. The effect of powder mixed and heated dielectric on drilling performance of electric discharge machining (EDM)
    Erdem O., ÇOĞUN C., Urtekin L., ÖZERKAN H. B. , USLAN İ.
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.31, no.3, pp.531-544, 2016 (Journal Indexed in SCI)
  8. DEVELOPMENT AND EXPERIMENTAL INVESTIGATION OF ELECTROCHEMICAL DRILLING METHOD USING ROTARY TUBE TOOL
    ÖZERKAN H. B. , ÇOĞUN C.
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.28, no.4, pp.885-895, 2013 (Journal Indexed in SCI)
  9. An experimental investigation on the effect of powder mixed dielectric on machining performance in electric discharge machining
    Cogun C., Oezerkan B., Karacay T.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, vol.220, no.7, pp.1035-1050, 2006 (Journal Indexed in SCI)

Articles Published in Other Journals

  1. Ti6Al4V Alaşımının Elektro Erozyon ile İşlemesinde Elektrolitik Cu ve CuBe Takım Elektrotlarının Performansının Karşılaştırılması
    URTEKİN L., BOZKURT F., ÖZERKAN H. B. , ÇOĞUN C., USLAN İ.
    El-Cezeri Fen ve Mühendislik Dergisi, vol.8, no.3, pp.1455-1461, 2021 (Refereed Journals of Other Institutions)
  2. Optimization of Machining Parameters for Electro Discharge Machining of Ferritic Stainless Steel
    Arat O., Özerkan H. B.
    Manufacturing Technologies and Applications (MATECA), vol.2, no.2, pp.49-58, 2021 (Refereed Journals of Other Institutions)
  3. Farklı termofiziksel özelliklere sahip metallerin tel elektro erozyon ile işlenmesinde performans parametrelerinin optimizasyonu
    ÖZERKAN H. B.
    Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.21, no.1, pp.139-151, 2019 (Other Refereed National Journals)
  4. Theoretical determination of the fatigue strength limit of electrical discharge machined (EDM) AISI 8740 steel
    ÖZERKAN H. B.
    IOP Conference Series: Materials Science and Engineering, vol.393, no.12103, pp.1-8, 2018 (Refereed Journals of Other Institutions)
  5. Tornalamada Oluşan Yüzey Pürüzlülüğünün Yorulma Ömrüne Etkisinin Teorik Değerlendirilmesi
    ÖZERKAN H. B.
    Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.33, no.2, pp.189-198, 2018 (Other Refereed National Journals)
  6. AN EXPERIMENTAL STUDY OF THE EFFECT OF ABRASIVE WATER JET AND LASER BEAM ON THE SURFACE INTEGRITY
    KAYA D., KÜÇÜKTÜRK G., ÖZERKAN H. B.
    Machine Design, vol.8, no.4, pp.155-158, 2016 (Refereed Journals of Other Institutions)
  7. EFFECTS OF CUTTING PARAMETERS ON THE CUTTING FORCE AND TORQUE IN DRILLING OF AISI D2 STEEL
    TEKAÜT İ., DEMİR H., ÖZERKAN H. B. , ŞEKER U.
    Machine Design, vol.9, no.1, pp.35-38, 2016 (Refereed Journals of Other Institutions)
  8. EFFECT OF POWDER MIXED DIELECTRIC ON MACHINING PERFORMANCE IN ELECTRIC DISCHARGE MACHINING (EDM)
    Özerkan H. B.
    GAZI UNIVERSITY JOURNAL OF SCIENCE, vol.18, no.2, pp.211-228, 2005 (Journal Indexed in ESCI)

Refereed Congress / Symposium Publications in Proceedings

  1. PLAZMA PÜSKÜRTME TEKNİĞİ İLE KAPLANAN AA5054 ALÜMİNYUM ALAŞIMININ MEKANİK ÖZELLİKLERİNİN BELİRLENMESİ
    ÖZERKAN H. B.
    INTERNATIONAL ANKARA CONFERENCE ON SCIENTIFIC RESEARCHES, Ankara, Turkey, 4 - 06 October 2019, pp.390-391
  2. AISI 430 Paslanmaz Çeliğinin Elektro Erozyon Yöntemi ile İşlenebilirliğinin Deneysel Olarak İncelenmesi
    ARAT O., ÇAKIROĞLU R., ÖZERKAN H. B. , GÜNAY M.
    Uluslararası Fen, Mühendislik ve Mimarlık Bilimlerinde Akademik Çalışmalar Sempozyumu, Ankara, Turkey, 13 - 15 June 2019, pp.540-547
  3. Theoretical investigation of the effect of surface roughness on the fatigue life of austenitic stainless steels
    ÖZERKAN H. B.
    International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE) - Materials Science, Sevastopol, Ukraine, 10 - 14 September 2018, vol.11, pp.417-422
  4. Elektro Erozyon İle Tornalamada İşleme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin Araştırılması
    ÇAKIROĞLU R., ÖZERKAN H. B. , GÜNAY M.
    V. Uluslararası Multidisipliner Çalışmaları Sempozyumu (ISMS), Ankara, Turkey, 16 - 17 November 2018, vol.2, pp.345-351
  5. Effect of electrode polarity on fatigue life in EDM
    ÖZERKAN H. B.
    International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE) - Materials Science, Sevastopol, Ukraine, 10 - 14 September 2018, vol.224
  6. Effect of changing polarity of graphite tool/Hadfield steel workpiece couple on machining performances in die sinking EDM
    ÖZERKAN H. B.
    International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE), Sevastopol, Ukraine, 11 - 15 September 2017, vol.129
  7. MACHINABILITY OF MICRO DEEP HOLE FOR Ti6Al4V ELI AND AISI 316L STAINLESS STEEL USING EDM
    BAVIL A. K. , KÜÇÜKTÜRK G., ÖZERKAN H. B.
    7th INTERNATIONAL SYMPOSIUM ON MACHINING, 3 - 05 November 2016, pp.460-471
  8. An Experimental Study Of The EffectOf Abrasive Water Jet And Laser Beam On The Surface Integrity
    KÜÇÜKTÜRK G., ÖZERKAN H. B. , KAYA D.
    he9th International Symposium Kod 2016 Machine And Industrial Design InMechanical Engineering, 9 - 12 July 2016, pp.217-220
  9. Effect of Cutting Parameters on the Cutting Force and torque in drilling of AISI D2 steel
    TEKAÜT İ., DEMİR H., ÖZERKAN H. B. , ŞEKER U.
    KOD 2016, Balatonfüred, Hungary, 9 - 12 June 2016, pp.211-216
  10. TOZ KATKILI DİELEKTRİKLE ELEKTRO EROZYON İŞLEME PERFORMANSI
    Oğuz e., ÇOĞUN C., URTEKİN L., ÖZERKAN H. B. , USLAN İ.
    7. Uluslarası Toz Metalurjisi Konferansı, Ankara, Turkey, 24 - 28 July 2014, pp.1035
  11. Elektro Erozyon İle İşlemede Döner Elektrot İle Delik Delmede Dielektrik Sıvısına Karıştırılan Tozların Ve Isıtmanın İşleme Performansına Etkisi
    ERDEM O., ÇOĞUN C., USLAN İ., URTEKİN L., ÖZERKAN H. B.
    Makine İmalat Teknolojileri Kongresi, Turkey, 6 - 07 December 2013, vol.2, pp.212-221

Academic and Administrative Experience

2020 - 2021 Assistant Director of Vocational School Gazi University, Teknik Bilimler Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümü
2016 - 2021 Yüksekokul Yönetim Kurulu Üyesi Gazi University, Teknik Bilimler Meslek Yüksekokulu
2010 - 2015 Head of Department Gazi University, Atatürk Meslek Yüksekokulu, Makine Ve Metal Teknolojileri Bölümü
2007 - 2010 Head of Department Gazi University, Atatürk Meslek Yüksekokulu, Makina ve Metal Teknolojisi

Courses

PROJE TASARIMI, Associate Degree, 2016 - 2017, 2017 - 2018
TERMODİNAMİK, Associate Degree, 2017 - 2018
CİSİMLERİN DAYANIMI, Associate Degree, 2016 - 2017, 2017 - 2018
İŞ YERİ EĞİTİMİ-I, Associate Degree, 2016 - 2017, 2017 - 2018
ÖLÇME VE KONTROL TEKNOLOJİSİ, Associate Degree, 2016 - 2017, 2017 - 2018
MAKİNE ELEMANLARI, Associate Degree, 2016 - 2017, 2017 - 2018
TEMEL İMALAT İŞLEMLERİ, Associate Degree, 2017 - 2018
BİLGİSAYAR DESTEKLİ ÜRETİM-I, Associate Degree, 2016 - 2017, 2017 - 2018
MUKAVEMET, Associate Degree, 2016 - 2017, 2017 - 2018
ALIŞILMAMIŞ ÜRETİM YÖNTEMLERİ, Associate Degree, 2016 - 2017, 2017 - 2018
BİLGİSAYAR DESTEKLİ ÇİZİM 2, Associate Degree, 2017 - 2018
İMALAT İŞLEMLERİ-I, Associate Degree, 2017 - 2018
İŞ YERİ EĞİTİMİ-III, Associate Degree, 2016 - 2017, 2017 - 2018
İŞ KALIPLARI, Associate Degree, 2017 - 2018
YÜZEY BİTİRME İŞLEMLERİ VE KAPLAMA TEKNİKLERİ, Associate Degree, 2016 - 2017, 2017 - 2018
İMALAT İŞLEMLERİ 1, Associate Degree, 2017 - 2018
BİLGİSAYAR DESTEKLİ TAKIM TEZGAHLARI, Associate Degree, 2016 - 2017, 2017 - 2018
MALZEME TEKNOLOJİSİ-II, Associate Degree, 2017 - 2018
TEMEL ŞEKİLLENDİRME İŞLEMLERİ, Associate Degree, 2017 - 2018
İŞ YERİ EĞİTİMİ-II, Associate Degree, 2016 - 2017, 2017 - 2018
İMALAT İŞLEMLERİ 2, Associate Degree, 2017 - 2018
CNC FREZE TEKNOLOJİSİ, Associate Degree, 2017 - 2018
ALIŞILMAMIŞ İMALAT YÖNTEMLERİ, Associate Degree, 2016 - 2017, 2017 - 2018
TEKNİK RESİM, Associate Degree, 2016 - 2017
CNC TORNA TEKNOLOJİSİ, Associate Degree, 2016 - 2017
İMALAT İŞLEMLERİ-1, Associate Degree, 2016 - 2017
BİLGİSAYAR PROGRAMLAMA, Associate Degree, 2016 - 2017
MALZEME TEKNOLOJİSİ 2, Associate Degree, 2016 - 2017
İMALAT İŞLEMLERİ-II, Associate Degree, 2016 - 2017

Advising Theses

ÖZERKAN H. B. , Paslanmaz çeliğinin elektro erozyon ile işlenmesinde işlem parametrelerinin optimizasyonu, Postgraduate, O.ARAT(Student), 2019
ÖZERKAN H. B. , Plastik kalıp çeliğinin (Nimax) işlenebilirliğinin incelenmesi, Postgraduate, Z.BOSTANCI(Student), 2018

Scientific Refereeing

Arabian Journal For Science And Engineering, Journal Indexed in SCI-E, February 2021
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, December 2020
Arabian Journal For Science And Engineering, Journal Indexed in SCI-E, December 2020
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Journal Indexed in SCI-E, November 2020
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, October 2020
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Journal Indexed in SCI-E, October 2020
Arabian Journal For Science And Engineering, Journal Indexed in SCI-E, October 2020
Arabian Journal For Science And Engineering, Journal Indexed in SCI-E, October 2020
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Journal Indexed in SCI-E, September 2020
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, August 2020
WEAR, Journal Indexed in SCI-E, June 2020
Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, Journal Indexed in SCI-E, March 2020
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Journal Indexed in SCI-E, January 2020
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Journal Indexed in SCI-E, December 2019
Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, Journal Indexed in SCI-E, November 2019
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Journal Indexed in SCI-E, October 2019
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Journal Indexed in SCI-E, October 2019
Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, Journal Indexed in SCI-E, September 2019
Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, Journal Indexed in SCI-E, June 2019
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, June 2019
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, April 2019
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, March 2019
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, January 2019
Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, Journal Indexed in SCI-E, January 2019
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, January 2019
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, December 2018
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, November 2018
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, November 2018
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, July 2018
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, July 2017
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, April 2017
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, November 2016
MACHINING SCIENCE AND TECHNOLOGY, Journal Indexed in SCI-E, April 2016

Citations

Total Citations (WOS):61
h-index (WOS):4

Research Areas

Mechanical Engineering