Prof. ABUZER ÖZSUNAR

Publication Network

Articles 19

1. High aspect ratio microchannel heat sink optimization under thermally developing flow conditions based on minimum power consumption

Parlak M., ÖZSUNAR A., KOŞAR A.

APPLIED THERMAL ENGINEERING , vol.201, 2022 (SCI-Expanded)

2. 3D Cfd Modelling of Non-transferred Argon Plasma Torch

Demir F., Yurtkuran E., Ünal R., Özsunar A.

Materials Today Proceedings , vol.32, pp.12-17, 2020 (Peer-Reviewed Journal)

3. İki Hücreli PEM Yakıt Pili Yığının Sayısal Analizi

Arıç T., Bilgili M., Özsunar A.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.7, no.4, pp.999-1011, 2019 (Peer-Reviewed Journal)

4. Investigation of the effect of gas flow rate and electric current on plasma jet temperature and velocity at torch exit by CFD analysis

Sunjuq W. K. W., Yurtkuran E., Özsunar A., Ünal R.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.33, pp.361-369, 2018 (SCI-Expanded)

5. Thermal transport in thin dielectric films with minute size aluminum dot in relation to microelectronics

Ali H., Yilbas B. S., Al-Sharafi A., ÖZSUNAR A.

APPLIED THERMAL ENGINEERING , vol.127, pp.1025-1035, 2017 (SCI-Expanded)

6. Potential for using recycled glass sand in engineered cementitious composites

Siad H., Lachemi M., Sahmaran M., Mesbah H. A., Hossain K. M. A., ÖZSUNAR A.

MAGAZINE OF CONCRETE RESEARCH , vol.69, no.17, pp.905-918, 2017 (SCI-Expanded)

7. Experimental investigation of energy-optimum radiant-convective heat transfer split for hybrid heating systems

Evren M. F., ÖZSUNAR A., Kilkis B.

ENERGY AND BUILDINGS , vol.127, pp.66-74, 2016 (SCI-Expanded) Sustainable Development

8. Orta ve Batı Karadeniz Bölgesi Rüzgar Enerjisi tahmin Çalışmaları

doğancı ö., ERTÜRK M. A. E., ÖZSUNAR A., ARCAKLIOĞLU E.

İleri Teknoloji Bilimleri Dergisi , vol.5, no.1, pp.153-163, 2016 (Peer-Reviewed Journal)

9. A NUMERICAL FORMULATION OF HEAT CONDUCTION IN IRREGULAR, STATIC OR TRANSLATING/ROTATING, PLANAR DOMAINS

bin Mansoor S., ÖZSUNAR A., Yilbas B. S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.29, no.4, pp.727-733, 2014 (SCI-Expanded)

10. A NUMERICAL INVESTIGATION TO THE EFFECT OF POROSITY ON THE COOLING CURVES OF THE POWDER CYLINDER SPECIMEN FOR QUENCHING PROCESSES

ÖZSUNAR A., Peker G.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.25, no.2, pp.299-309, 2010 (SCI-Expanded)

11. The prediction of maximum temperature for single chips' cooling using artificial neural networks

ÖZSUNAR A., ARCAKLIOĞLU E., Nusret Dur F.

HEAT AND MASS TRANSFER , vol.45, no.4, pp.443-450, 2009 (SCI-Expanded)

12. Investigation of temperature distribution in ZrO(2) insulation coatings on Ag substrates during cooling

Ozsunar A.

MATERIALS & DESIGN , vol.29, no.9, pp.1690-1693, 2008 (SCI-Expanded)

13. Experimental investigation of mixed convection heat transfer in a horizontal and inclined rectangular channel

Ozsunar A., Baskaya Ş., Sivrioglu M.

HEAT AND MASS TRANSFER , vol.38, no.3, pp.271-278, 2002 (SCI-Expanded)

14. Numerical analysis of Grashof number, Reynolds number and inclination effects on mixed convection heat transfer in rectangular channels

Ozsunar A., Baskaya Ş., Sivrioglu M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , vol.28, no.7, pp.985-994, 2001 (SCI-Expanded)

15. Yatay dikdörtgen kesitli bir kanalda laminer karışık konveksiyon şartlarında ısı transferi ve sıcaklık dağılımının incelenmesi

Özsunar A., Başkaya Ş.

Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , vol.14, pp.505-518, 2001 (Peer-Reviewed Journal) Sustainable Development

16. KARE KESİTLİ YATAY BİR KANALDA LAMİNER KARIŞIK KONVEKSİYON AKIŞIN İNCELENMESİ

ÖZSUNAR A.

TEKNOLOJİ , 2001 (Peer-Reviewed Journal)

17. Numerical investigation of fluid flow in a duct with rectangular cross section under laminar mixed convection conditions Dikdörtgen kesitli bir kanalda laminer karişik konveksiyon şartlarindaki akişin sayisal olarak incelenmesi

Özsunar A., Başkaya Ş., Sivrioğlu M.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.15, pp.71-86, 2000 (SCI-Expanded)

18. YATAY DİKDÖRTGEN KESİTLİ BİR KANALDA LAMİNER KARIŞIK KONVEKSİYON ŞARTLARINDA ISI TRANSFERİ VE SICAKLIK DAĞILIMININ İNCELENMESİ YATAY DİKDÖRTGEN KESİTLİ BİR KANALDA LAMİNER KARIŞIK KONVEKSİYON ŞARTLARINDA ISI TRANSFERİ VE SICAKLIK DAĞILIMININ İNCELENMESİ

ÖZSUNAR A., BAŞKAYA Ş., SİVRİOĞLU M.

Gazi Üniversitesi Fen Bilimleri Dergisi , 2000 (Peer-Reviewed Journal) Sustainable Development

19. Dikdörtgen kesitli bir kanalda laminer karışık konveksiyon şartlarındaki akışın sayısal olarak incelenmesi

ÖZSUNAR A., BAŞKAYA Ş., SİVRİOĞLU M.

Gazi Üniv. Müh.-Mim. Fakültesi Dergisi , vol.15, no.1, pp.71-86, 2000 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences 15

1. Numerical Study of Multi Hot Spot GaN Cooling in a Cold Plate Considering Different Flow Networks

Parlak M., Ors E., ÖZSUNAR A.

19th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2020, Florida, United States Of America, 21 - 23 July 2020, pp.482-490, (Full Text)

2. PEM Yakıt Pillerinde Su İçeriğinin Hücre Performansı Üzerine Etkilerinin Sayısal İncelenmesi

Günüşen H., BİLGİLİ M., ÖZSUNAR A.

22. Isı Bilimi ve Tekniği Kongresi (ULIBTK 2019), Kocaeli, Turkey, 11 - 14 September 2019, vol.3, pp.131-136, (Full Text)

3. MEASUREMENT OF THERMAL STRAIN ON A PRINTED CIRCUIT BOARD

Demirtaş M., ÖZSUNAR A., Altıntaş B.

International Natural Science, Engineering and Material Technologies Conference, İstanbul, Turkey, 9 - 10 September 2019, (Full Text)

4. 3D MODELLING OF DC NON-TRANSFERED ARC PLASMA TORCH AND INVESTIGATION OF CREATION OF ARC ROOT INTHE TORCH

DEMİR F., YURTKURAN E., ÜNAL R., ÖZSUNAR A.

The Porous and Powder Materials Symposium and Exhibitions, 12 - 15 September 2017, (Full Text)

5. IMPROVEMENT OF PLASMA TORCH GEOMETRY BY CFD FORMETAL POWDER PRODUCTION

YURTKURAN E., ÜNAL R., ÖZSUNAR A.

The Porous and Powder Materials Symposium and Exhibitions, 12 - 15 September 2017, (Full Text)

6. Numerical Modeling of Torch Design for Plasma Atomization

YURTKURAN E., ÜNAL R., ÖZSUNAR A.

7th International Advances in Applied Physics and Materials Science Congress, 22 - 26 April 2017, (Summary Text)

7. 3D CFD Modelling of Argon Non-Transferred Plasma Torch

Demir F., Yurtkuran E., Ünal R., Özsunar A.

7th International Advances in Applied Physics and Materials Science Congress, Aydın, Turkey, 22 - 26 April 2017, (Summary Text)

8. Ozsunar A Biyikoglu A Kilkis B Determination of Heat Transfer Coefficient between Heated Floor and Space Using the Principles of ANSI ASHRAE Standard 138 Test Chamber

EVREN M. F., ÖZSUNAR A., BIYIKOĞLU A., KILKIŞ B.

ASHRAE Winter Conference, 28 January - 01 February 2017, (Full Text)

9. Determination of Heat Transfer Coefficient Between Heated Floor and Space Using the Principles of ANSI/ASHRAE Standard 138 Test Chamber

Evren M. F., ÖZSUNAR A., BIYIKOĞLU A., Kilkis B.

ASHRAE Winter Conference, Nevada, United States Of America, 28 January - 01 February 2017, vol.123, pp.71-81, (Full Text) Sustainable Development

10. 3D Cfd modelling of non-transferred argon plasma torch

DEMİR F., Yurtkuran E., ÜNAL R., ÖZSUNAR A.

7th International Advances in Applied Physics and Materials Science Congress and Exhibition, APMAS 2017, Fethiye, Turkey, 22 - 26 April 2017, vol.32, pp.12-17, (Full Text)