MgSO4 Etkisine Maruz Rijit Yol Kaplamalarında Pomza Ve Zeolit Katkılı Betonun Kullanılabilirliği


Yıldız K., Demirel C.

JOURNAL OF POLYTECHNIC, cilt.17, sa.1, ss.23-29, 2014 (Hakemli Dergi)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 17 Sayı: 1
  • Basım Tarihi: 2014
  • Doi Numarası: 10.2339/2014.17
  • Dergi Adı: JOURNAL OF POLYTECHNIC
  • Derginin Tarandığı İndeksler: TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.23-29
  • Gazi Üniversitesi Adresli: Evet

Özet

Bu çalışmada pomza ve zeolit içeren yüksek dayanımlı betonun “YDB. MgSO4 çevresel etkisi altında rijit yol kaplaması olarak kullanılabilirliği araştırılmıştır. Bu kapsamda, üretilen beton için taze beton deneyleri, basınç dayanımı deneyi ve aşınma direnci deneyleri yapılmıştır. Üretilen betonda bağlayıcı olarak kullanılan çimento, pomza ve zeolit üzerinde fiziksel, kimyasal ve mekanik deneyler yapılmıştır. Yüksek dayanımlı beton “YDB. karışım dizaynı gerçekleştirilirken çimentoya ikame edilmek suretiyle sırasıyla %0 Pomza+%15 Zeolit (0P15Z), %5 Pomza+%10 Zeolit (5P10Z), %10 Pomza+%5 Zeolit (10P5Z) ve %15 Pomza+%0 Zeolit (15P0Z) olmak üzere dört tip YDB üretilmiştir. Sonuç olarak, MgSO4 çevresel etkisi altında kalan YDB’ların sadece yüzeylerinde “candlot tozu ve kalsiyum sülfoalimünat. gibi birtakım reaksiyon ürünleri oluşmuştur. Ancak betona zarar veren bu ürünlerin betonun merkezine doğru nüfuz edemediği görülmüştür. Diğer taraftan gözle görülebilir çatlak oluşmadığı, özellikle ilerleyen yaşlarda numunenin ayrıtlarında çok hafif kopmalar olduğu tespit edilmiştir. Aşınma dayanımı değerlerinin ise tüm beton türlerinde ASTM C944-99’de öngörülen değerlerin altında olduğu tespit edilmiştir.

In this study, pumice and zeolite containing high-strength concrete under the environmental impact of MgSO4 as the availability of rigid pavement was investigated. In this context, experiments produced concrete for concrete, compressive strength and abrasion resistance tests were conducted. Physical, chemical and mechanical experiments have been made on the cement, pumice and zeolite which were used as binders in concrete High-strength concrete "HSC" cement mix design is being realized through the substitution to be 0% pumice + 15% Zeolite (0P15Z), 5% pumice + 10% Zeolite (5P10Z), 10% pumice + 5% zeolite (10P5Z) and 15% pumice +% 0 Zeolite (15P0Z) respectively. HSC to four types were produced. As a result, under the influence of environmental MgSO4 only the surfaces of the remaining HSC "candlot powder and calcium sulfoalimunat such as" some reaction products were formed. However, damage to concrete, these products were unable to penetrate toward the center of the concrete. On the other hand does not create visible cracks, especially in later times in the edges of the sample was found to be of very light break. Abrasion resistance of concrete values for all types of the predicted values under ASTM C944-99 that have been determined.