An investigation of effect of upsetting current time and full annealing heat treatment on mechanical properties of 16MnCr5 chain steel welded with flash butt welding Yakma Alin Kaynaǧi İle Bi̇rleşti̇ri̇len 16MnCr5 Zi̇nci̇r Çeli̇ǧi̇nde Yiǧma Akim Zamani ve Tam Tavlama Isil İşlemi̇ni̇n Mekani̇k Özelli̇klere Etki̇si̇ni̇n İncelenmesi̇

---

Atıf İçin Kopyala

ÇETİNKAYA C., ARABACI U.

Journal of the Faculty of Engineering and Architecture of Gazi University, cilt.19, sa.4, ss.455-465, 2004 (SCI-Expanded)

• Yayın Türü: Makale / Tam Makale
• Cilt numarası: 19 Sayı: 4
• Basım Tarihi: 2004
• Dergi Adı: Journal of the Faculty of Engineering and Architecture of Gazi University
• Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, TR DİZİN (ULAKBİM)
• Sayfa Sayıları: ss.455-465
• Gazi Üniversitesi Adresli: Evet

Özet

In this study, a pair of 16MnCr5 chain steel was welded to each other by using flash butt welding method. During the experimental study the pressure was set to 2 Bars and upsetting current times were chosen as 1.6, 1.8 and 2 seconds. The samples were welded under these test conditions. Some of the welded samples was subjected to full annealing heat treatment. Experimental results showed that, welding interface exhibited the highest hardness. However hardness in the interface of non-heat treated sample decreased with increasing upsetting current time. Tensile strength increased with increasing upsetting current time. Full annealing heat treatment reduced the hardness and tensile strength of the welded samples.