A Novel Method of Electric Scooter Torque Estimation Using the Space Vector Modulation Control


Hicham C., Nasri A., KAYIŞLI K.

International Journal of Renewable Energy Development, cilt.10, sa.2, ss.355-364, 2021 (ESCI) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 10 Sayı: 2
  • Basım Tarihi: 2021
  • Doi Numarası: 10.14710/ijred.2021.33403
  • Dergi Adı: International Journal of Renewable Energy Development
  • Derginin Tarandığı İndeksler: Emerging Sources Citation Index (ESCI), Scopus
  • Sayfa Sayıları: ss.355-364
  • Anahtar Kelimeler: Three-wheel scooter, electric vehicle, SiDGM, space vector modulation, direct torque control, electronic differential, ENERGY MANAGEMENT, BATTERY CHARGER, SPEED CONTROL
  • Gazi Üniversitesi Adresli: Hayır

Özet

In recent years, there are many studies have been conducted in the field of light electric vehicles, especially electric scooters. These are preferred in large urban areas that are crowded with cars and cause traffic congestion in the European and Asian continents. In this study, the three-wheel electric scooter contained two BLDC motors that drove the rear wheels and, each of these motors were controlled independently via an electronic differential. This paper aims to implement a Space Vector Modulation for the Direct Torque Control unit (SVM-DTC) of the BLDC wheel-motor of each driving wheel. The proposed system had been designed and simulated by using the MATLAB/SIMULINK environment. The performance of the overall system (scooter stability control system - energy storage system power quality. etc.) with using SVM-DTC control was compared with the classical Direct Torque Control (DTC) algorithm by using the same electric scooter model. The obtained results showed clearly the improvement made by the proposed control loop system at different stages, where it could reduce the THD of the stator current from 30.99% to 6.16%,as well as it was able to achieve more than 0.2% of the charging state of the battery in 18 seconds only.