Experimental investigation of the performance of a Ranque-Hilsch vortex tube with regard to a plug located at the hot outlet

Dincer K., Baskaya Ş. , Uysal B. Z. , Ucgul I.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, vol.32, no.1, pp.87-94, 2009 (Journal Indexed in SCI) identifier identifier

  • Publication Type: Article / Article
  • Volume: 32 Issue: 1
  • Publication Date: 2009
  • Doi Number: 10.1016/j.ijrefrig.2008.06.002
  • Page Numbers: pp.87-94
  • Keywords: Refrigeration system, Vortex tube, Ranque-Hilsch, Experiment, Performance, Parameter, Piping, Geometry, ENERGY SEPARATION, FLOW, UNCERTAINTY, PARAMETERS


In this study, effects of position, diameter (5, 6, 7, 8 mm) and angle (30 degrees-180 degrees) of a mobile plug, located at the hot outlet side in a Ranque-Hilsch Vortex Tube (RHVT), were determined experimentally for best performance. In addition to plug parameters, effects of supply pressure (200-420 kPa) and number of nozzles (2, 4, 6) were also studied. The internal diameter (D) of the vortex tube used in the experiments was 9 mm; the ratio of the length of the vortex tube to its diameter (L/D) was 15. Four different plug locations were studied. The maximum difference in the temperatures of hot and cold streams was obtained for the plug diameter of 5 mm, tip angles of 30 degrees and 60 degrees, 4 nozzles and by keeping the plug location at the far extreme end. (C) 2008 Elsevier Ltd and IIR. All rights reserved.