The effect of continuous and pulsed current on microstructure and mechanical properties in TIG welding of Al-Si alloy sheets


Creative Commons License

Durgutlu A.

KOVOVE MATERIALY-METALLIC MATERIALS, cilt.54, sa.5, ss.345-350, 2016 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 54 Sayı: 5
  • Basım Tarihi: 2016
  • Doi Numarası: 10.4149/km_2016_5_345
  • Dergi Adı: KOVOVE MATERIALY-METALLIC MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.345-350
  • Gazi Üniversitesi Adresli: Evet

Özet

In this experimental study, Al-Si alloy sheets were joined through TIG welding method by using continuous current and pulsed current. Tensile test, bending test, hardness test, and microstructure examination of joined test samples were carried out in order to see the effect of current type on mechanical properties of welded samples. Experimental results showed that pulsed current led to low heat input, grain refinement, and hardness increase in weld metal compared to alternative current. The samples joined by using the pulsed current showed higher tensile strength than the samples welded by using the alternative current. After bending test, cracks, tearing, and surface defection were not observed in the samples.