Effects of using ethyl acetate as a surprising additive in SI engine pertaining to an environmental perspective


YEŞİLYURT M. K., Erol D., Yaman H., Dogan B.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, cilt.19, sa.10, ss.9427-9456, 2022 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 19 Sayı: 10
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1007/s13762-021-03706-3
  • Dergi Adı: INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), Biotechnology Research Abstracts, CAB Abstracts, Compendex, Environment Index, Geobase, INSPEC, Pollution Abstracts, Veterinary Science Database
  • Sayfa Sayıları: ss.9427-9456
  • Anahtar Kelimeler: Compression ratio, Gasoline, Ethyl acetate, Exergy, Exergoeconomic, Performance, SPARK-IGNITION ENGINE, ETHANOL-GASOLINE BLENDS, DIESEL-ENGINE, COMPRESSION RATIO, EXERGY ANALYSES, EMISSION CHARACTERISTICS, EXHAUST EMISSIONS, COMBUSTION CHARACTERISTICS, FUEL PROPERTIES, BUTANOL BLENDS
  • Gazi Üniversitesi Adresli: Evet

Özet

Blending oxygenated fuels with gasoline improve exhaust emissions. In this study, tests were performed in a single-cylinder spark-ignition engine at a constant speed of 1600 rpm for different loads (8, 10, 12, and 14 kg) and compression ratios (8:1, 9:1, and 10:1), and carbon monoxide, hydrocarbon, nitrogen monoxide, and carbon dioxide emissions were determined. Ethyl acetate was mixed with gasoline at 4%, 8%, and 12% by volume and used as alternative fuels in the experiments. The performance of ethyl acetate blends compared to gasoline was investigated by energy, exergy, and exergoeconomic analyses. Carbon monoxide, hydrocarbon, and nitrogen monoxide occurring in the engine were lower for ethyl acetate blends than gasoline. When the load is 14 kg and the compression ratio is 10:1, hydrocarbon emissions in 12% ethyl acetate blend and gasoline are 128.66 ppm and 161 ppm, respectively. According to the data obtained from energy analysis, the difference between the thermal efficiency of 12% ethyl acetate blend and gasoline fuels is a maximum of 5%. This difference decreases even more at low engine loads. When the load is 14 kg and the compression ratio is 10:1 in 12% ethyl acetate blend and gasoline, the exergy efficiency is 34.27% and 37.17%, respectively. According to the exergoeconomic analysis, the engine power cost varies according to different loads and compression ratios and is higher by 20-27% in 12% ethyl acetate blend than gasoline. In case pump prices of ethyl acetate are reduced, fuel blends with gasoline can be used as an alternative fuel.