Design and implementation of a new portable thermoelectric generator for low geothermal temperatures


AHISKA R., MAMUR H.

IET RENEWABLE POWER GENERATION, cilt.7, sa.6, ss.700-706, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 7 Sayı: 6
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1049/iet-rpg.2012.0320
  • Dergi Adı: IET RENEWABLE POWER GENERATION
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.700-706
  • Anahtar Kelimeler: flow measurement, power engineering computing, power system measurement, SCADA systems, temperature measurement, thermoelectric conversion, power 100 W, temperature 67 degC, power 41, 6 W, portable thermoelectric generator, low geothermal temperature difference, SCADA-based testing, measurement system, hot-cold water flow rate, load resistance
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, the design and implementation of a new portable thermoelectric generator of 100 W for low geothermal temperatures has been carried out. For this system, a new SCADA-based testing and measuring system equipped with special software has been developed and employed for the first time. Thus, effects of the hot-cold water flow rates, the temperature differences between the surfaces and the load resistance affecting output power and efficiency of the thermoelectric generator have been investigated by a single testing and measuring system device. In the established SCADA-based testing and measuring system, the hot-cold water flows passed throughout the surfaces of the thermoelectric generator were increased by up to 3.7 and 12.8 l/min, respectively. Then, the temperature difference between the surfaces of the thermoelectric generator was measured as 67 degrees C. When the load resistance of the thermoelectric generator was about 15 , the maximum power of the thermoelectric generator was obtained as 41.6 W and the conversion efficiency was calculated as 3.9%. Also, the SCADA-based testing and measuring system will open up a new stage in examination of various thermoelectric generators.