Comparison of three IBSCs in terms of photo-filling, capture cross section of carriers, the concentration of IB states and overlapping of absorption coefficients in the wide range of band gaps including GaAs

Kızıloğlu V., Navruz T. S., Saritas M.

Optik, cilt.225, 2021 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 225
  • Basım Tarihi: 2021
  • Doi Numarası: 10.1016/j.ijleo.2020.165680
  • Dergi Adı: Optik
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Communication Abstracts, INSPEC
  • Anahtar Kelimeler: Intermediate-band solar cells, Efficiency optimization, Wide range of band gaps, Overlapping absorption, Optimum photo-filling, Capture cross section of carriers, The concentration of IB states, Sun concentration, INTERMEDIATE-BAND, SOLAR-CELLS, DEEP STATES, EFFICIENCY, DIFFUSION, DESIGN
  • Gazi Üniversitesi Adresli: Evet

Özet

© 2020 Elsevier GmbHIntermediate-band solar cells, IBSCs, with single IB provide better utilization of the solar spectrum than single junction solar cells. In this study, Model−B IBSC was proposed, investigated and compared with previously used two models named here as Model−A and Model−C respectively. Detailed Balance Model was applied to satisfy Current Balance Equations with the optimum photo filling of IB states in Model−B. Optimum design parameters were obtained using 104 cm−1 of band-to-band absorption coefficient, α, in the wide range of band gap materials, overlapping absorption, photo filling, f, of IB states, capture cross-section ratio of carriers, concentration of IB states, and IB layer thickness, w, under 1–46,000 sun concentration, X. Maximum limiting efficiency value of 63.2% has been obtained with 1.95 eV of band gap, for fαw≥5 and 46,000X, under non-overlapping absorption. The peak efficiency of Model−B was 16% over the Model−A and 8% over the Model−C, for equal capture cross sections under large overlapping. The peak efficiency of Model−B was 35% over Model−A, at large non-equal capture cross-sections and large overlapping. Results predicted that the materials in the wide range of band gaps could be good candidates for fabricating IBSCs using Model−B with an efficiency of 50% or above at lower sun concentration, 10,000X, even under large overlapping.