Exchange of experience the effect of synthesis time on the wear behavior of Al-8%Ti alloy produced by mechanical alloying

Ozyurek D., Tekeli S., Tuncay T., Yilmaz R.

POWDER METALLURGY AND METAL CERAMICS, cilt.51, ss.491-495, 2012 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 51
  • Basım Tarihi: 2012
  • Doi Numarası: 10.1007/s11106-012-9459-5
  • Dergi Adı: POWDER METALLURGY AND METAL CERAMICS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.491-495
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, Al-8%Ti alloy was produced by mechanical alloying. The produced powders were cold pressed at 630 MPa and synthesized at 600A degrees C for 12 and 24 h under argon gas atmosphere. After synthesis processes, the specimens were examined by SEM, XRD, and hardness tests. Wear tests were carried out under dry sliding conditions using a pin-on-disk type machine at a constant load of 30 N and a sliding speed of 1 m/sec. Total sliding distances were selected as 500, 1000, 1500, and 2000 m. The experimental results showed that the hardness and density of Al-%8Ti alloy increased with increasing synthesis time. It was also observed that volume reduction increased with increasing sliding distance and decreased with increasing synthesis time.