EFFECTS OF DIFFERENT STIRRER-PIN FORMS ON THE JOINING QUALITY OBTAINED WITH FRICTION-STIR WELDING

BAŞAK H., Kaptan K.

MATERIALI IN TEHNOLOGIJE, cilt.49, sa.5, ss.693-701, 2015 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 49 Sayı: 5
  • Basım Tarihi: 2015
  • Doi Numarası: 10.17222/mit.2014.062
  • Dergi Adı: MATERIALI IN TEHNOLOGIJE
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.693-701
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, 20 different pins that could be employed in friction-stir welding were manufactured. These pins and the A17075 T6 material were joined with the friction-stir-welding technique. Tensile tests, microstructure and microhardness measurements, scanning-electron-microscopy (SEM) and energy-dispersion-spectrometry (EDS) analyses were conducted on the components joint by friction-stir welding. Designs of the weld and the tip that achieve the best performance were determined.