Achieving bifacial photovoltaic performance in PTB7-based organic solar cell by integrating transparent contact for emerging semi-transparent applications

ÇOKDUYGULULAR E., ÇETİNKAYA Ç., EMİK S., KINACI B.

SCIENTIFIC REPORTS, cilt.14, sa.1, 2024 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 14 Sayı: 1
  • Basım Tarihi: 2024
  • Doi Numarası: 10.1038/s41598-024-76366-1
  • Dergi Adı: SCIENTIFIC REPORTS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, BIOSIS, Chemical Abstracts Core, MEDLINE, Veterinary Science Database, Directory of Open Access Journals
  • Anahtar Kelimeler: Bifaciality, Color rendering index, Light management engineering, MoO3/Ag/WO3 transparent contact, PTB7:PC71BM, Semi-transparent organic solar cells
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, the design, fabrication and detailed analysis of semi-transparent bifacial organic solar cells (ST-OSC) based on MoO3/Ag/WO3 (10/d(m)/d(od) nm) dielectric/metal/dielectric (DMD) transparent contact system integrated with PTB7 polymer were investigated. The study emphasizes the importance of designing transparent contact systems to optimize the solar cells' transparency (average visible transmittance, AVT), color rendering (color rendering index, CRI), efficiency (power conversion efficiency, PCE), and bifaciality. The performance of three distinct configurations was examined in the AVT(max) (47.14% AVT, 3.93% PCE), (CRIext)(max) (23.82% AVT, 6.21% PCE), and Extreme Color (26.34% AVT, 5.81% PCE). The theoretically predicted AVTs for these configurations were 48.75%, 22.29%, and 25.15%, respectively. The strong agreement between theoretical and observed outcomes confirmed the accuracy of the Transfer Matrix Model (TMM). Furthermore, the assessment of bifaciality performance exhibited that the AVT(max) had a bifaciality factor of 0.94, with a PCE of 3.67% under top illumination and 3.93% under bottom illumination. The high bifaciality of the structure designed with TMM to maximize the AVT demonstrates the value of calculations prior to solar cell structure fabricating and the possibility of constructing high bifaciality structures using this technique.