Preparation of a new solid state fluoride ion selective electrode and application

Somer G., Kalyaci S., Basak I.

TALANTA, cilt.80, sa.3, ss.1129-1132, 2010 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 80 Sayı: 3
  • Basım Tarihi: 2010
  • Doi Numarası: 10.1016/j.talanta.2009.08.037
  • Dergi Adı: TALANTA
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1129-1132
  • Anahtar Kelimeler: Fluoride electrode, Determination of fluoride, Solid state, Fluoride in water, MEMBRANE ELECTRODE, IRON(III), MERCURY
  • Gazi Üniversitesi Adresli: Evet

Özet

Anew solid state fluoride ion selective electrode composed of 70%Ag(2)S, 10% Cu(2)S and 20% CaF(2) has been developed. An analytically useful potential change occurred, from 1 x 10(-6) to 1 x 10(-1) M fluoride ion. The slope of the linear portion (1 x 10(-1)-1 x 10(-5) M) was about 26 +/- 2mV/10-fold concentration changes in fluoride. It was found that pH change between 1 and 8 had no effect on the potential of the electrode. There was no interference of most common cations such as W. Na(+), Ca(2+) and Mg(2+) and anions such as Cl(-), NO(3)(-), SO(4)(2-) and PO(4)(3-). The lifetime of the electrode was more than 2 years, when used at least 4-5 times a day, and the response time was about 60 s.