Akademik Veri Yönetim Sistemi
Fuel, cilt.350, 2023 (SCI-Expanded)
Bio-fuel production from bio-oil was investigated in the presence of microporous HZSM-5 and Al2O3 (MA) based catalysts. This study focused on the catalytic upgrading of a model bio-oil compound with ethanol for bio-fuel production. The model compound containing hydroxypropanol/furfural/formic acid: 4/6.5/5 by volume was used as a bio-oil mixture. Activity tests were performed under atmospheric pressure with a volumetric feed ratio of 30/70 bio-oil mixture/ethanol using a 0.5 g catalyst. In the reaction studies performed on the commercial microporous HZSM-5 catalyst, the optimum co-cracking temperature was determined as 400 °C. Mesoporous γ-Al2O3 support was synthesized by the evaporation-induced self-assembly (EISA) synthesis method, and Ni, Ta, and Zr metals were incorporated into the structure of the catalyst by the impregnation method to improve the surface acidity. The synthesized catalysts were characterized by X-ray diffraction (XRD), X-ray absorption near edge spectroscopy (XANES), N2 adsorption–desorption, scanning electron microscopy energy dispersive spectroscopy (SEM/EDS), X-ray fluorescence (XRF), Fourier-transformed infrared spectroscopy (FTIR), pyridine adsorbed diffuse reflectance FTIR spectroscopy (DRIFTS), and thermogravimetric/differential thermal analysis (TGA-DTA). Monometallic and pure alumina catalysts indicated an ordered mesoporous structure with surface area values 106–389 m2/g. Lewis and Brønsted acid sites associated with mild acidity were observed in the DRIFTS results of the 10 wt% Zr-containing alumina catalyst (10Zr@MA). The highest oil phase selectivity and isoparaffin selectivity in oil phase values were obtained in the presence of 10Zr@MA as 17.22% and 80.96%, respectively. 10Zr@MA catalyst showed the best catalytic activity compared to other catalysts, with 9.54% coke formation.