Mechanically robust and ambient NH3 sensors based on electrospun Ti-doped ZnO/PEDOT:PSS nanoarchitectures
Materials Today Communications, cilt.57, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 57
- Basım Tarihi: 2026
- Doi Numarası: 10.1016/j.mtcomm.2026.116629
- Dergi Adı: Materials Today Communications
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core, Compendex, INSPEC
- Anahtar Kelimeler: Ammonia sensor, Composite fibers, Electrospinning, Ti doping, ZnO
- Gazi Üniversitesi Adresli: Evet
Özet
In this study, fabrication of a flexible chemiresistive NH3 sensor based on Ti-doped ZnO nanoparticles incorporated into electrospun PEDOT:PSS/PVA nanofibers and directly deposited onto a flexible IDT. Structural characterization by XRD combined with Rietveld refinement confirmed substitution of Ti into the hexagonal wurtzite ZnO lattice without secondary phase formation, accompanied by slight lattice expansion. HRTEM revealed well-resolved lattice fringes, homogeneous elemental distribution, and a reduction in particle size from 100 to 150 nm for pristine ZnO to 50–90 nm following Ti incorporation. The fabricated flexible sensor exhibited excellent NH3 sensing performance over a concentration range of 1–100 ppm, delivering enhanced sensitivity and stable response characteristics. The improved sensing behavior is attributed to the synergistic effects of Ti-induced oxygen vacancies, reduced crystallite size, enhanced surface-active sites, and efficient charge transport within the conductive polymeric fiber network. Furthermore, postmortem SEM and FTIR analyses confirmed excellent structural integrity, chemical stability. Notably, Ti incorporation into the ZnO matrix significantly reduced the optimal operating temperature from 110 °C for the pristine ZnO composite to 70 °C for the Ti-doped showing better sensing capability. Mechanical investigations demonstrated excellent flexibility with the sensor retaining response values of 37% under 90° bending.