The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete


BOLAT H., ŞİMŞEK O. , ÇULLU M., DURMUŞ G. , Can O.

COMPOSITES PART B-ENGINEERING, cilt.61, ss.191-198, 2014 (SCI İndekslerine Giren Dergi) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 61
  • Basım Tarihi: 2014
  • Doi Numarası: 10.1016/j.compositesb.2014.01.043
  • Dergi Adı: COMPOSITES PART B-ENGINEERING
  • Sayfa Sayıları: ss.191-198

Özet

Attempts to find a construction material having increased strength, ductility, toughness, and durability have led to interest in high performance fiber reinforced concrete. The use of such materials increases day by day. When the fibers are distributed in a homogeneous way and used in appropriate quantity inside the concrete, they reduce cracks, contribute to tensile strength, toughness, ductility and durability, and improve other mechanical properties. In this study, four types of concrete were produced: steel fiber (SFRC), polyester fiber (PYFRC), polypropylene fiber (PPFRC) reinforced concrete and a reference sample made of plain concrete (R1); these were then compared to one another. The ratio of fibers was used 4.25% of volume of concrete. The effects of the different types of fiber on hardened concrete were determined by conducting physical and mechanical experiments. Compressive strength, surface hardness, ultrasonic pulse velocity, carbonation, abrasion, capillarity and freeze thaw resistance experiments were conducted on hardened concretes. SFRC had higher 12.4%, PYFRC 3.4% higher and PPFRC 4.3% lower compressive strength with respect to RI. PPFRC showed 8.04% higher compressive strength than R1 when it was determined by the surface hardness method. SFRC showed 5.4% higher compressive strength than R1 when we applied the ultrasonic pulse velocity method. In the abrasion experiment, the highest abrasion was found in SFRC with similar to 0.5%, while the lowest was found in PPFRC at similar to 0.18%. The highest and lowest amount of capillary water absorption was seen in R1 and PYFRC, respectively. In a carbonation experiment, SFRC was determined similar to 130.8% higher than R1. It was concluded that the types of fiber used for reinforcement influenced the physical and mechanical properties of the concrete. (C) 2014 Elsevier Ltd. All rights reserved.