Sensorless model predictive control scheme of wind-driven doubly fed induction generator in dc microgrid


Bayhan S., Abu-Rub H., Ellabban O.

IET RENEWABLE POWER GENERATION, vol.10, no.4, pp.514-521, 2016 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 10 Issue: 4
  • Publication Date: 2016
  • Doi Number: 10.1049/iet-rpg.2015.0347
  • Journal Name: IET RENEWABLE POWER GENERATION
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.514-521
  • Keywords: sensorless machine control, predictive control, asynchronous generators, distributed power generation, power generation control, stators, rectifiers, power convertors, rotors, electric current control, discrete time systems, power 6, 4 kW, discrete-time operation, inner control loop, current controller, model-free solution, stator frequency detection, sensorless position detection technique, VSC, voltage source converter, diode rectifier, DFIG, MPC strategy, DC microgrid, wind-driven doubly fed induction generator, sensorless model predictive control scheme, POWER ELECTRONICS, DFIG, INVERTER, IMPLEMENTATION, DESIGN
  • Gazi University Affiliated: Yes

Abstract

This study presents a novel sensorless model predictive control (MPC) strategy of a wind-driven doubly fed induction generator (DFIG) connected to a dc microgrid. In this configuration, the stator is directly connected to the dc microgrid through a diode rectifier, and the rotor is fed by only a voltage source converter (VSC). This connection structure brings considerable benefits such as simple control scheme and reduced power converter cost. In order to obtain sensorless operation, a simple and effective sensorless position detection technique has been proposed. It is based on the detection of the stator frequency, and it is designed to operate without any machine parameters. Thus, the proposed sensorless method offers as a model-free solution. In addition, the MPC strategy has been used as a current controller to overcome the weaknesses of the inner control loop and to consider the discrete-time operation of the VSC. The proposed control system is robust against machine parameters, speed, and load variations. To verify the dynamic and steady-state performances of the proposed sensorless MPC scheme under various speed and load conditions, experimental studies are performed with 6.4 kW DFIG. Experimental results aim to show that the proposed sensorless MPC strategy works properly at steady state and in transient.