Relative humidity dependent proton transport and PEM fuel cell performance of phosphonated PVA-boric acid/TiO2 composite membranes


YAĞIZATLI Y., Cali A., ŞAHİN A., BALBAŞI M.

Ionics, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1007/s11581-026-07618-5
  • Dergi Adı: Ionics
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Chemical Abstracts Core, Compendex, INSPEC, Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest)
  • Anahtar Kelimeler: Boric acid, PEM fuel cell, Polyvinyl alcohol, Proton exchange membrane, Titanium dioxide
  • Gazi Üniversitesi Adresli: Evet

Özet

The membranes were evaluated in terms of water uptake, dimensional change, ion exchange capacity, mechanical properties, proton conductivity, oxidative stability, and single-cell performance. TiO2 addition increased water uptake from 36 to 37% to 40–45%, while changes in thickness and surface area remained limited. The optimal composition was PPVA-B-15T, containing 15 wt% TiO2, with a maximum water uptake of 45%, an ion-exchange capacity of 1.04 meq g-1, a tensile strength of 64 MPa, and a proton conductivity of 0.030 S cm-1 at 80 °C and 100% RH, which decreased to approximately 0.0044 S cm-1 at 40% RH. FTIR and SEM analyses supported the dispersion of TiO2 within the PPVA-B matrix and interfacial Ti-O-P interactions. Under these conditions, the PPVA-B-15T composition showed a current density of 710 mA cm-2 at 0.60 V and the maximum power density of 0.48 W cm-2. Under dry feed conditions, the PPVA-B-15T maintained the power density of 0.46 W cm-2 at 60 °C. Furthermore, while the TiO2 containing membranes retained 84–87% of their initial mass after 96 h of Fenton exposure, PPVA-B-15T exhibited the lowest 24 h OCV loss among the composites (18.6%). However, higher TiO2 loadings reduced proton conductivity, mechanical properties, and cell performance. During 100 h potentiostatic operation at 0.60 V, 80 °C, and 100% RH, PPVA-B-15T retained 83.1% of its initial current density. This indicates that the electrochemical response is governed by transport continuity rather than by total water uptake or ion exchange capacity. These results reveal that 15 wt% TiO2 is the optimal loading and show that PPVA-B/TiO2 composites have the ability to act as fluorine free membranes in proton exchange membrane fuel cells.