INVESTIGATION OF THE EFFECTS OF SOME MODIFICATION PROCESS TO THE MECHANICAL PERFORMANCE AND DEFORMATION OF THE WOODWORK

Onduran A., Yaşar Ş. Ş., Altunok M.

WOOD RESEARCH, cilt.62, ss.405-416, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 62
  • Basım Tarihi: 2017
  • Dergi Adı: WOOD RESEARCH
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.405-416
  • Anahtar Kelimeler: Thermal process, wood modification, impregnation, industrial woodwork, diagonal pressure test, HIGH-TEMPERATURE, HEAT-TREATMENT, SPRUCE WOOD
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, wood modification (thermo-processing and impregnation) and outdoor conditions of storage (natural aging) the effects on the mechanical performance of industrial woodwork was investigated. For this purpose, naturally grown in Turkey and the commercial value of high Scots pine (Pinus sylvestris L.) and chestnut (Castanea sativa Mill) wood was used. Experimental examples are specifically woodwork has been applied in actual size. Considering the previously conducted research literature only diagonal L-type samples used, not on the actual size samples of woodwork. In addition, there is no study that the combination of the heat-treatment and impregnation. This reveals the original values of this study. For preparing of samples is used the double tenon-mortise corner joint from constructions method and as glue polyurethane based Desmodur VTKA and Polyvinyl acetate based two-component D4.