Akademik Veri Yönetim Sistemi
Materials, cilt.16, sa.16, 2023 (SCI-Expanded)
Silicone elastomers play a crucial role in the field of maxillofacial prosthodontics. To maintain optimal hygiene, various disinfectants have been reported to clean silicone prostheses. Nevertheless, when selecting a disinfectant, it is important to consider not only its antimicrobial efficacy, but also its compatibility with the materials, to minimize any potential impact on the physical properties of the material surfaces. The coloring effect of such disinfectants on different types of silicone is of interest. A total of 144 silicone specimens (72 pure silicones, 72 nano-TiO2-incorporated silicones, from A-2000 and A-2006 silicones) were fabricated in this study. The spectrophotometric analysis was carried out, and the initial CIE L*a*b* color values were measured prior to disinfection. Specimens in each silicone group (with or without nano-TiO2) were subjected to a 30-h disinfection period simulating 1 year of disinfection with the following disinfectants: Control (tap water), 0.2% chlorhexidine gluconate, 4% chlorhexidine gluconate, 1% NaOCl, neutral soap, and effervescent. After the second color values were recorded, the color change (∆E*) was calculated. Significant differences were observed among the disinfectants for both the A-2000 and A-2006 silicone groups. Nano-TiO2 did not show a color protection effect in A-2000 silicone. In contrast, nano-TiO2 incorporation provided color protection against CHG 0.2%, CHG 4%, and NaOCl in A-2006 silicone. Most of the disinfectants did not show acceptable color stability over time. In pure A-2000 silicone, except for 0.2% chlorhexidine, all disinfectant groups demonstrated a color change within the acceptability threshold of 50:50% (∆E* = 3.0). On the other hand, in nano-TiO2-incorporated A-2006 silicone, only 0.2% and 4% chlorhexidine demonstrated an acceptable color change. Overall, chlorhexidine could be used as a suitable disinfectant in maxillofacial silicone prostheses.