Akademik Veri Yönetim Sistemi
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, cilt.41, 2023 (SCI-Expanded)
Improvements in high energy density rare-earth permanent magnets make it innovative to develop magnetic couplings for Starter/Generator applications in the light of more electric aircraft to ensure magnetically insulated contactless power transmission between decoupled shafts for safe operation. Although there are essential studies on magnetic couplings in the literature, especially those for aerospace Starter/Generator structures are rarely encountered. However, methodologies considering system constraints and examining design parameters of couplings are in demand. In response to such a need, this paper proposes the novel design of highly reliable synchronous radial magnetic couplings with torque requirements of 6 and 12 N.m to isolate Starter/Generator and piston engine shafts in model aircraft. The preliminary volume is obtained analytically. Simulations are executed by optimetric approaches in Ansys Maxwell 2D. Optimisation techniques are compared in Maxwell 3D to get the final shape. The retaining sleeve of 0.5 mm is suggested. Loss of synchronisation in the event of the piston shaft failure or exceeding the maximum torque of the coupling is also examined. The torque fluctuation at load changes is 0.1%. Performance tests are conducted on the direct dynamic test bench. Absolute error margin is 37% for the Virtual Work method, 13% for 2D FEM and 6% for 3D FEM. The coupling efficiency is 93.8% at the maximum operating speed and the critical angle, and 96.9% at the minimum torque angle and the minimum operating speed.(c) 2023 Karabuk University. Publishing services by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).