Mechanical properties of aluminum powder reinforced polypropylene


GÜLDAŞ A., ALTUĞ M., Temel S.

MATERIALS TESTING, cilt.59, sa.1, ss.86-93, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 59 Sayı: 1
  • Basım Tarihi: 2017
  • Doi Numarası: 10.3139/120.110970
  • Dergi Adı: MATERIALS TESTING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.86-93
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, PP-based composites reinforced were produced by using three injection pressures IP (50, 55, 60 MPa), three injection temperatures IT (210, 220, 230 degrees C), three holding pressures HP (35, 40, 45 MPa), three reinforcement rates Rr (5, 10, 15 wt.-%) and three reinforcement sizes Rs (44-100, 101-210, 210-300 mu m) and their mechanical properties were investigated. Moreover, 0.2 % maleic anhydride was also added in order to prevent oxidation during addition of aluminum powders. The best results in terms of tensile strength were obtained from the specimen with the code C2, with the parameter values R-s = 100 -210 mu m, R-r = 15 wt.-%, I-T = 230 degrees C, I-P = 50 MPa and H-P = 40 MPa. The best results in the tensile tests were received from the specimen with code A2, having the parameter values R-s = 100-210 mu m, R-r = 5 wt.-%, I-T = 210 degrees C, I-P = 50 MPa and H-P = 35 MPa. On the other hand, the best results in the izod tests were obtained for the specimen with the code C1 with the parameter values R-s = 44-100 mu m, R-r = 15 wt.-%, I-T = 210 degrees C, I-P = 60 MPa and HP = 45 MPa.