Tanalith-E ile emprenye işleminin masif ağaç malzemenin yüzey pürüzlülüğüne etkileri


Bülbül R. , Keskin H.

Mobilya ve Ahşap Malzemeleri Araştırma Dergisi, vol.2, no.2, pp.67-78, 2019 (Other Refereed National Journals)

  • Publication Type: Article / Article
  • Volume: 2 Issue: 2
  • Publication Date: 2019
  • Title of Journal : Mobilya ve Ahşap Malzemeleri Araştırma Dergisi
  • Page Numbers: pp.67-78

Abstract

Impacts of impregnation with Tanalith-E on surface roughness of solid
wood materials
Abstract
This study was carried out to determine the impacts of impregnation with Tanalith-E on
surface roughness of solid wood materials. For this purpose, Oriental beech (Fagus orientalis
Lipsky), Scotchpine (Pinus sylvestris Lipsky), European oak (Quercus petraea Liebl.) and
Uludag fir (Abies nordmanniana subsp. Bornmüllerana Mattf.) woods widely used in Turkey
are impregnated with Tanalith-E impregnation solution for short term (10 minutes) and
medium term (2 hours) immersion method according to ASTM D 1413 standard. The surface
roughness of the wood is determined according to the principles of TS EN 971 standards.
According to tree species, the highest mean Ra roughness values; short-term impregnated
European oak (5.22 μm) was obtained in Oriental beech (4.80 μm), Uludağ fir (3.42 μm) and
Scotchpine (3.03 μm) respectively. Medium-term impregnated oval (6.42 μm), Oriental beech
(5.020 μm), Uludağ fir (4.24 μm) and Scotch pine (3.74 μm) were obtained. As a result, short
and medium time impregnation with Tanalith-E increased surface roughness values. In places
where the surface roughness value is desired to be low, the use of solid Scotch pine wood may
be recommended.
Keyworhttps://www.researchgate.net/publication/338224361_Tanalith-e_ile_emprenye_isleminin_masif_agac_malzemenin_yuzey_puruzlulugune_etkilerids: Impacts of impregnation with Tanalith-E on surface roughness of solid
wood materials
Abstract
This study was carried out to determine the impacts of impregnation with Tanalith-E on
surface roughness of solid wood materials. For this purpose, Oriental beech (Fagus orientalis
Lipsky), Scotchpine (Pinus sylvestris Lipsky), European oak (Quercus petraea Liebl.) and
Uludag fir (Abies nordmanniana subsp. Bornmüllerana Mattf.) woods widely used in Turkey
are impregnated with Tanalith-E impregnation solution for short term (10 minutes) and
medium term (2 hours) immersion method according to ASTM D 1413 standard. The surface
roughness of the wood is determined according to the principles of TS EN 971 standards.
According to tree species, the highest mean Ra roughness values; short-term impregnated
European oak (5.22 μm) was obtained in Oriental beech (4.80 μm), Uludağ fir (3.42 μm) and
Scotchpine (3.03 μm) respectively. Medium-term impregnated oval (6.42 μm), Oriental beech
(5.020 μm), Uludağ fir (4.24 μm) and Scotch pine (3.74 μm) were obtained. As a result, short
and medium time impregnation with Tanalith-E increased surface roughness values. In places
where the surface roughness value is desired to be low, the use of solid Scotch pine wood may
be recommended.
Keywords: Surface roughness, impregnation, Tanalith-E, wood material roughness, impregnation, Tanalith-E, wood material