Toward the Replacement of Long-Chain Perfluoroalkyl Compounds: Perfluoropolyether-Based Low Surface Energy Grafted Nanocoatings

Demir Çalışkan T., Özkan Hüküm K., Çaykara T., Luzinov I.

ACS APPLIED POLYMER MATERIALS, cilt.4, ss.980-986, 2022 (SCI-Expanded)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 4
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1021/acsapm.1c01438
  • Dergi Adı: ACS APPLIED POLYMER MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Emerging Sources Citation Index (ESCI), Scopus
  • Sayfa Sayıları: ss.980-986
  • Gazi Üniversitesi Adresli: Evet

Özet

We describe a straightforward approach to fabricating perfluoropolyether (PFPE)-based nanocoatings, significantly decreasing the spreading of oil and water on coated surfaces. In the fabrication, polyglycidyl methacrylate (PGMA) is used as an anchoring layer deposited on the silicon surface before PFPE attachment. Perfluoropolyether-based polyester acid (PFPE-COOH) is then grafted to the PGMA surface to reduce its surface energy and, consequently, wettability. The grafted surface demonstrates a hexadecane contact angle of 40–46° and a water contact angle of 80–98°. The surface’s wettability strongly depends on the grafted layer thickness, where grafting of the thicker PFPE layers results in lower oil and water wettability. We expect that the employment of PFPE-based grafted nanocoatings will eliminate the health and environmental concerns of long perfluoroalkyls, which are typically used to obtain surfaces with decreased spreading of oil and water.