Multi-Objective Optimization of Process Parameters for Drilling Fiber-Metal Laminate Using a Hybrid GRAPCA Approach

EKİCİ E., MOTORCU A. R., UZUN G.

FME Transactions, cilt.49, sa.2, ss.356-366, 2021 (ESCI) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 49 Sayı: 2
  • Basım Tarihi: 2021
  • Doi Numarası: 10.5937/fme2102356e
  • Dergi Adı: FME Transactions
  • Derginin Tarandığı İndeksler: Emerging Sources Citation Index (ESCI), Scopus, Directory of Open Access Journals
  • Sayfa Sayıları: ss.356-366
  • Anahtar Kelimeler: Fiber-metal laminate, CARALL composite, drilling, thrust force, surface roughness, delamination
  • Gazi Üniversitesi Adresli: Evet

Özet

This study investigated the effects of drilling parameters and cutting tool coating conditions on the thrust force, surface roughness, and delamination factor in the drilling of fiber-reinforced carbon reinforced aluminum laminate (CARALL) composite, a commercial type of fiber-metal laminate. Gray relational analysis (GRA) was used as a multi-objective optimization method to determine optimum processing parameters and principal component analysis (PCA) was used to determine the weights. According to the findings of this experimental study, the most effective control factors for the thrust force, surface roughnes, and delamination factor were the feed rate, tool coating condition-cutting speed interaction, and tool coating condition, with 93.87%, 66.504%, and 29.137% contribution rates, respectively. From the results of the GRA-PCA analysis, the optimum levels of the control factors were determined as 110 m/min cutting speed, 0.1 mm/rev feed rate, and the uncoated tool.