Akademik Veri Yönetim Sistemi
GAZI UNIVERSITY JOURNAL OF SCIENCE, cilt.36, sa.3, ss.1351-1367, 2023 (ESCI)
Indium sulfide films were deposited by radio frequency magnetron sputtering technique on soda lime glass substrate. The deposition was conducted at the temperature of 150 degrees C and prepared films were then thermally annealed under argon atmosphere at 350 degrees C and 450 degrees C for 30 min. The impact of post-thermal annealing treatment on the properties of the films was investigated. From X-ray diffraction analysis, the formation of the stable tetragonal beta-In2S3 crystal structure was substantiated and revealed that the thermal annealing treatment at 450 degrees C improved the crystallization of the films. The change in surface topographies and morphologies of the films depending on the post-thermal annealing process were examined by atomic force microscopy and scanning electron microscopy techniques, respectively. The stoichiometric ratio of constituent elements in the films was obtained by elemental analysis and it was seen that the films had slightly sulfur (S) deficit composition. It was found that the concentration of S slightly increased with the thermal annealing process. The room temperature photoluminescence spectra revealed that the films included vacancies of sulfur (VS: donor) and indium (In) (VIn: acceptor), indium interstitial (Ini: donor) and oxygen (O) in vacancy of sulfur (OVs: acceptor) defects with strong and broad emission bands at around 1.70, 2.20, and 2.71 eV.