Laser melting deposition additive manufacturing of ti6al4v biomedical alloy: Mesoscopic in-situ flow field mapping via computational fluid dynamics and analytical modelling with empirical testing

Creative Commons License

Mahmood M. A., Rehman A. U., Pitir F., SALAMCI M. U., Mihailescu I. N.

Materials, cilt.14, sa.24, 2021 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 14 Sayı: 24
  • Basım Tarihi: 2021
  • Doi Numarası: 10.3390/ma14247749
  • Dergi Adı: Materials
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, CAB Abstracts, Communication Abstracts, Compendex, INSPEC, Metadex, Veterinary Science Database, Directory of Open Access Journals, Civil Engineering Abstracts
  • Anahtar Kelimeler: 3D printing, laser melting deposition, computational fluid dynamics model, analytical model, melt flow, marangoni force, recoil pressure, NUMERICAL-SIMULATION, THERMAL-BEHAVIOR, HEAT-TRANSFER, TEMPERATURE-FIELD, POOL BEHAVIOR, POWDER, SINGLE, MICROSTRUCTURE, CONVECTION, TRANSPORT
  • Gazi Üniversitesi Adresli: Evet

Özet

© 2021 by the authors. Licensee MDPI, Basel, Switzerland.Laser melting deposition (LMD) has recently gained attention from the industrial sectors due to producing near-net-shape parts and repairing worn-out components. However, LMD remained unexplored concerning the melt pool dynamics and fluid flow analysis. In this study, computational fluid dynamics (CFD) and analytical models have been developed. The concepts of the volume of fluid and discrete element modeling were used for computational fluid dynamics (CFD) simulations. Furthermore, a simplified mathematical model was devised for single-layer deposition with a laser beam attenuation ratio inherent to the LMD process. Both models were validated with the experimental results of Ti6Al4V alloy single track depositions on Ti6Al4V substrate. A close correlation has been found between experiments and modelling with a few deviations. In addition, a mechanism for tracking the melt flow and involved forces was devised. It was simulated that the LMD involves conduction-mode melt flow only due to the coaxial addition of powder particles. In front of the laser beam, the melt pool showed a clockwise vortex, while at the back of the laser spot location, it adopted an anti-clockwise vortex. During printing, a few partially melted particles tried to enter into the molten pool, causing splashing within the melt material. The melting regime, mushy area (solid + liquid mixture) and solidified region were determined after layer deposition. This research gives an in-depth insight into the melt flow dynamics in the context of LMD printing.