Effect of the Mechanical Densification Process in Wood Material on the Surface Adhesion Strength of Varnishes

Atilgan A., BURDURLU E., ATAR M., Yasar S. S.

BioResources, cilt.19, sa.4, ss.7977-7989, 2024 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 19 Sayı: 4
  • Basım Tarihi: 2024
  • Doi Numarası: 10.15376/biores.19.4.7977-7989
  • Dergi Adı: BioResources
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Agricultural & Environmental Science Database, CAB Abstracts, Chemical Abstracts Core, Compendex, Veterinary Science Database, Directory of Open Access Journals
  • Sayfa Sayıları: ss.7977-7989
  • Anahtar Kelimeler: Adhesion, Black pine, Mechanical densification, Sanding process, Varnishes
  • Gazi Üniversitesi Adresli: Evet

Özet

This research aimed to determine the impact of the mechanical densifying process of wood material on the varnish surface adhesion strength. Specimens from black pine (Pinus nigra) and Uludag fir (Abies bornmuelleriana Mattf.) were subjected to densification in a hydraulic press at 140 °C to the extent of 25% and 50% in the radial direction. While densification increased the surface adhesion strength of the varnish layer in black pine, the value decreased in fir. Regarding the interaction between densification ratio, surface treatment, and wood type, the highest surface adhesion strength of the varnish layer was found in black pine + unsanded surface + 25% densification, and the lowest was in Uludag fir + unsanded surface + 50% densification. It can be stated that the densification process creates high adhesion values for the polyurethane varnish in the black pine wood type. The sanding process has an intensifying effect on these values, and the products that were obtained from the polyurethane varnished samples do not require sanding. Considering these situations can provide significant advantages in projects with wood materials subjected to the densification process.