Ceramic Slurry Design for Vat-Photopolymerization of Turbine Blade Ceramic Cores: A Review


Özeren E., Kaya B., KAYA D., Lagarrigue P., Grossin D., KÜÇÜKTÜRK G.

Journal of the American Ceramic Society, cilt.109, sa.10, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Derleme
  • Cilt numarası: 109 Sayı: 10
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1111/jace.71322
  • Dergi Adı: Journal of the American Ceramic Society
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Periodicals Index Online, Applied Science & Technology Source, Chemical Abstracts Core, Chimica, Compendex, INSPEC, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO), Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest)
  • Anahtar Kelimeler: ceramic cores, ceramic slurry, turbine blade, vat photopolymerization
  • Gazi Üniversitesi Adresli: Evet

Özet

Vat-photopolymerization (VPP) is an additive manufacturing (AM) technology that offers distinct advantages over conventional manufacturing methods for fabricating complex ceramic components, including ceramic cores for gas-turbine components. In VPP, a ceramic slurry serves as the feedstock and is selectively cured using a laser or projected light to form the desired solid geometry. A comprehensive understanding and optimization of ceramic slurry characteristics are essential for building high-performance ceramic cores. This review thoroughly examines the slurry components, including powder composition, particle size and morphology, resin systems, and additives, and discusses their combined effects on rheology, curing behavior, and post-processing. The reviewed studies indicate that high-performance ceramic cores result from synergistic optimization of the entire slurry system rather than from the adjustment of a single process parameter. Silica-based systems, particularly those containing alumina (Al2O3) and zirconium silicate (ZrSiO4), demonstrate a promising balance of low thermal expansion, refractoriness, leachability, and mechanical strength. Across the reviewed studies, representative processing ranges include solid loadings of 60–70 vol%, printable viscosities below 20 Pa·s, and achieving flexural strengths up to 24 MPa after sintering temperatures of 1150°C–1250°C. This review also explores the complex trade-offs among mechanical strength, porosity, dimensional accuracy, and leachability, as well as the effects of infiltration on mechanical properties. Finally, this review highlights ongoing technical challenges and outlines research avenues for VPP-processed ceramic cores.