Akademik Veri Yönetim Sistemi
Journal of Materials Science: Materials in Electronics, cilt.35, sa.36, 2024 (SCI-Expanded)
In this study, Schottky diode (SD) with a structure of Au/(AgCdS:PVP)/n-Si has been fabricated and then its electrical parameters and conduction mechanisms (CMs) investigated by measuring current–voltage (I–V) and capacitance/conductance–voltage (C/G–V) data in dark and under 100-mW cm−2 illumination intensity at room temperature (RT). These measurements show that almost all basic electrical parameters and CM depend on illumination, frequency, and voltage. The energy/voltage-dependent profile of surface states (Nss) was extracted from the forward bias I–V data considering voltage dependence of ideality factor (n), barrier height, and low/high-frequency capacitance model. The density of doping atoms (Nd), barrier height (ΦB(C–V)), and the width of depletion region (Wd) were also computed by the linear zone of the reverse bias C−2–V plot at a frequency of 1 MHz, and the dark conditions. The maximum photosensitivity and photoresponsivity were found as 384 and 7.5 mW A−1 under 100 mW cm−2, respectively. Based on the experimental findings, the Au/(AgCdS:PVP)/n-Si SD has good rectifier and photodiode behavior and hence, it can be successfully used in electronic and optoelectronic applications rather than conventional metal–semiconductor (MS)-type SD with/without an insulator layer grown by traditional techniques considering the advantages of polymers, such as high mechanical strength, low-cost production, and low energy consumption.