Wear Characteristics of Polymer -Based Composites

Sahin Y., Mirzayev H.

MECHANICS OF COMPOSITE MATERIALS, cilt.51, sa.5, ss.543-554, 2015 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 51 Sayı: 5
  • Basım Tarihi: 2015
  • Doi Numarası: 10.1007/s11029-015-9525-4
  • Dergi Adı: MECHANICS OF COMPOSITE MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.543-554
  • Anahtar Kelimeler: PTFE, bronze-filled composite, glass-filled composite, carbon-filled composite, load, dry wear, SLIDING WEAR, TRIBOLOGICAL BEHAVIOR, FRICTION, EPOXY, ALLOY, POLYTETRAFLUOROETHYLENE, POLYAMIDE-66, FILLERS, UHMWPE, AL2O3
  • Gazi Üniversitesi Adresli: Evet

Özet

The dry wear of polytetrafluoroethylene (PTFE)-based composites, including bronze-filled composites (B60), glass-filled composites (G15), and carbon-filled composites (C25), produced by the mold casting method were investigated under different sliding conditions. The Taguchi L27 method and the analysis of variance were used to identify the effect of process parameters on the wear of tested materials. Experimental results showed that the wear resistance of G15 polymer composites was better than those of C25 and B60 ones. The specific wear rate decreased with increasing sliding distance and load, but partly decreased with increasing tensile strength.