Temperature-dependent fracture surface evolution and deformation mechanism transitions in Ti-6Al-4V alloy sheet
MATERIALS TODAY COMMUNICATIONS, sa.57, ss.1-13, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Basım Tarihi: 2026
- Doi Numarası: 10.1016/j.mtcomm.2026.116659
- Dergi Adı: MATERIALS TODAY COMMUNICATIONS
- Derginin Tarandığı İndeksler: Scopus, Science Citation Index Expanded (SCI-EXPANDED), Chemical Abstracts Core, Compendex, INSPEC
- Sayfa Sayıları: ss.1-13
- Gazi Üniversitesi Adresli: Evet
Özet
This study investigates the temperature-dependent fracture surface evolution and deformation mechanism transitions of Ti-6Al-4V alloy sheets through uniaxial tensile tests conducted at room temperature (RT), 600, 700, 800, and 900 °C under strain rates of 3.125 × 10−2 s−1 and 3.125 × 10−3 s−1 along three rolling directions (RD, DD, TD). Fracture surfaces were characterized by scanning electron microscopy (SEM), and the results were correlated with microhardness measurements and microstructural observations. A progressive transition in fracture morphology was identified: from deep equiaxed dimples governed by micro-void coalescence (MVC) at RT, through enlarged dimples at 600 °C, to a morphology suggesting a potential mixed DRV/DRX mechanism at 700 °C, and ultimately a web-like fracture surface characteristic of grain boundary sliding (GBS) at 800–900 °C. At 10−3 s−1, the total elongation increased from 19.84% at RT to 458.19% at 900 °C, confirming superplastic behavior in the GBS-dominated regime. The strain rate sensitivity was most pronounced at 900 °C, where reducing the rate by one order of magnitude enhanced the elongation from 70% to 458%. Additionally, the rolling direction-dependent anisotropy in tensile strength decreased from 8.58% at RT to 3.88% at 900 °C, with fractographic evidence confirming the significant homogenization of orientation-dependent dimple morphologies at elevated temperatures. The findings provide a systematic framework linking deformation mechanism transitions to fracture surface characteristics across a wide temperature range, offering practical guidance for hot forming process optimization.
This study investigates the temperature-dependent fracture surface evolution and deformation mechanism transitions of Ti-6Al-4V alloy sheets through uniaxial tensile tests conducted at room temperature (RT), 600, 700, 800, and 900 °C under strain rates of 3.125 × 10−2 s−1 and 3.125 × 10−3 s−1 along three rolling directions (RD, DD, TD). Fracture surfaces were characterized by scanning electron microscopy (SEM), and the results were correlated with microhardness measurements and microstructural observations. A progressive transition in fracture morphology was identified: from deep equiaxed dimples governed by micro-void coalescence (MVC) at RT, through enlarged dimples at 600 °C, to a morphology suggesting a potential mixed DRV/DRX mechanism at 700 °C, and ultimately a web-like fracture surface characteristic of grain boundary sliding (GBS) at 800–900 °C. At 10−3 s−1, the total elongation increased from 19.84% at RT to 458.19% at 900 °C, confirming superplastic behavior in the GBS-dominated regime. The strain rate sensitivity was most pronounced at 900 °C, where reducing the rate by one order of magnitude enhanced the elongation from 70% to 458%. Additionally, the rolling direction-dependent anisotropy in tensile strength decreased from 8.58% at RT to 3.88% at 900 °C, with fractographic evidence confirming the significant homogenization of orientation-dependent dimple morphologies at elevated temperatures. The findings provide a systematic framework linking deformation mechanism transitions to fracture surface characteristics across a wide temperature range, offering practical guidance for hot forming process optimization.