Investigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritor


Kilinc Y., Ozturk S., Ozturk B., Uslan İ.

POWDER TECHNOLOGY, cilt.146, sa.3, ss.200-205, 2004 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 146 Sayı: 3
  • Basım Tarihi: 2004
  • Doi Numarası: 10.1016/j.powtec.2004.09.031
  • Dergi Adı: POWDER TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.200-205
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study, a vibratory horizontal attritor was designed, constructed and used to produce alumina powders. The effects of process parameters, such as milling time, ball-powder weight ratio (BPR) and rotational speed (RS) of the attritor on the mean particle size and particle size distribution have been investigated. Milling times of 1, 5, 10 and 15 It and ball-powder weight ratios of 5:1, 10:1, 20:1 and 40:1 were considered in the present study. Rotational speeds of the attritor were selected as 500, 700 and 900 rpm and distilled water was used as milling media.