The Effects of Tool Coating and Cutting Speed on Tool Wearing in The Machining of Stainless Steel

Altinkaya E., GÜLLÜ A.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, cilt.11, sa.3, ss.243-247, 2008 (ESCI) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 11 Sayı: 3
  • Basım Tarihi: 2008
  • Doi Numarası: 10.2339/2008.11.3.243-247
  • Dergi Adı: JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI
  • Derginin Tarandığı İndeksler: Emerging Sources Citation Index (ESCI), TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.243-247
  • Anahtar Kelimeler: TiAlN, TiN, Al2O3, Stainless steel, Tool wear, Coating
  • Gazi Üniversitesi Adresli: Evet

Özet

In this study the influence of cutting tool coating on the wear of cutting edge while milling of AISI 316 austenitic stainless steel by end-mill cutter was investigated. For this process, three different coated tools and three different cutting speeds (180, 225, 270 m/min) were used and the depth of cut was kept constant. It was observed that the tool coated with TiAlN gave the best wear resistance. The tools coated sequentially with TiN/TiCN/TiN and TiN/TiCN/Al2O3 are also good at wear resistance.