In Vitro and Electrochemical Characterization of Laser-Cladded Ti-Nb-Ta Alloy for Biomedical Applications

Soni R., Pande S., Salunkhe S. S., Natu H., Nasr E. A., Shanmugam R., ...Daha Fazla

CRYSTALS, cilt.12, sa.7, 2022 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 12 Sayı: 7
  • Basım Tarihi: 2022
  • Doi Numarası: 10.3390/cryst12070954
  • Dergi Adı: CRYSTALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Applied Science & Technology Source, Chemical Abstracts Core, Communication Abstracts, Computer & Applied Sciences, INSPEC, Metadex, Directory of Open Access Journals, Civil Engineering Abstracts
  • Gazi Üniversitesi Adresli: Hayır

Özet

Titanium (Ti) and its alloys are predominant choices for use as biomaterials in human implants. Research has shown the adverse effects of using commercial Ti alloy Ti-6Al-4V in the human body, and this presents a need for viable alternatives. In this study, Ti alloy Ti-17Nb-6Ta was manufactured by laser cladding-a prominent additive manufacturing (AM) technology. Laser cladded specimens were evaluated for their in vitro and electrochemical behavior. A human osteosarcoma cell line (MG-63 cells) was used for in vitro investigations. Cell proliferation was good in the physiological medium, and cells were alive when in contact with the laser cladded alloy, even after two to three weeks, indicating good cell viability and compatibility with this alloy. Electrochemical characterization was carried out in Ringer's solution, and noticeably lower corrosion current density and corrosion rate values were observed. The lower amounts of these parameters indicated the passivation behavior due to multi-layer Ti, Nb, and Ta alloy oxide films. These oxide films also enhanced osseointegration. Thus, the Ti-17Nb-6Ta alloy can be an ideal biocompatible alternative to Ti-6Al-4V.