A Study on the Cutting Force in Milling of Boron Carbide Particle Reinforced Aluminum Composite


ACIR A. , TURGUT Y. , Ubeyli M., Gunay M., ŞEKER U.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, cilt.16, sa.3, ss.187-195, 2009 (SCI İndekslerine Giren Dergi) identifier identifier

  • Cilt numarası: 16 Konu: 3
  • Basım Tarihi: 2009
  • Dergi Adı: SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
  • Sayfa Sayıları: ss.187-195

Özet

In this study, cutting forces in the face milling operation of boron carbide particle reinforced aluminum metal matrix composite were investigated. Composite samples were produced using powder metallurgy technique. Then, milling operations were conducted using coated and uncoated tools at three different cutting speeds (100 m/min, 150 m/min and 200 m/min) and feed rates (0.05 mm/z, 0.10 mm/z, 0.15 mm/z). Experimental results showed that the cutting force increased with increasing feed rate significantly whereas, cutting speed and tool type had little effect on the cutting force.