Determination of Some Physical Attributes for Wooden Construction Elements Strengthened with Woven Wire Fiberglass

Creative Commons License

TOĞAY A., Ergin E.

BIORESOURCES, vol.9, no.3, pp.3883-3900, 2014 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 9 Issue: 3
  • Publication Date: 2014
  • Doi Number: 10.15376/biores.9.3.3883-3900
  • Journal Name: BIORESOURCES
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.3883-3900
  • Gazi University Affiliated: Yes


This study designed composite wooden construction elements strengthened with woven wire fiberglass netting and determined the technical attributes. Scots pine (Pinus sylvestris L.) was used in wooden layers, and woven wire fiberglass netting was used in intermediate layers. Layers were pressed with polyvinyl acetate (PVAc) D-3 and Desmodur-VTKA adhesives to form 7 solid 13-layer laminated composite specimens. Experiments on 95 specimens determined density, bonding strength, bending resistance, and compression strength; solid and solid laminated wooden materials were tested and compared. BS EN 204 and BS EN 205 standards were complied with for bonding strength tests, TS 5497 EN 408 was used for densities, and TS 549 EN 408 was followed for bending resistance and compressive strength. Most factors, except for intermediate layer material in compressive strength and bending resistance tests perpendicular to the glue line, did not cause significant differences. Variables (adhesive, intermediate layer material) used for determining bending strength parallel to the glue line were effective. Polyurethane adhesive increased resistance to bending parallel to the glue line. These composite wooden construction elements supported with woven wire fiberglass netting could be advantageous for applications that require high bending resistance perpendicular to the glue line. However, these composites do not hold a compressive strength advantage.