Yayınlar & Eserler

Yayın Ağı
Makaleler 14
Tümü (14)
SCI-E, SSCI, AHCI (12)
SCI-E, SSCI, AHCI, ESCI (12)
Scopus (13)
Diğer Yayınlar (1)

1. Game-based and individualized movement training improves physiological and motor outcomes in young adults with autism spectrum disorder: an experimental study from Türkiye

AYDIN A., Söyler M., ZİLELİ R., HALMATOV M., GÜRKAN A. C., AKCAN İ. O., et al.
BMC Sports Science, Medicine and Rehabilitation , cilt.18, sa.1, 2026 (SCI-Expanded, Scopus) identifier identifier

2. New insights on the influence of hard transformed regions created on R260 rails using lasers on damage behaviour during rolling-sliding contact tests

Yang Y., Aydın A., Mumtaz K., Meierhofer A., Lewis R.
WEAR , sa.206615, ss.1-11, 2026 (SCI-Expanded, Scopus)

3. Effects of Kinetic- and Kinematic-Oriented Change-of-Direction Training on Anterior Cruciate Ligament Risk Factors in Elite Soccer Players Under Fatigue

Altug T., Soyler M., AYDIN A., ÇELİK S., Taber C. B.
Journal of strength and conditioning research , cilt.40, sa.3, 2026 (SCI-Expanded, Scopus) identifier identifier

4. Evaluation of pre-operative endometrial biopsy accuracy and etiological distribution in abnormal uterine bleeding using the PALM–COEIN classification

Deniz R., Baykus Y., Tigli A., Uzuner M. B., Sener N., Degirmenci Y. E., et al.
Frontiers in Medicine , cilt.13, 2026 (SCI-Expanded, Scopus) Creative Commons License identifier identifier identifier

5. Powder-Bed Fusion Additive Manufacturing of 316L Stainless Steel Using Short-Wavelength Diode Point Melting

Erman S., Aydın A., Mumtaz K.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY , cilt.1, sa.1, ss.1-37, 2025 (SCI-Expanded, Scopus) identifier

6. In-situ Dynamic laser area heating during diode point melting for thermal gradient reduction in laser powder bed fusion

Aydın A., Cetin E., Mumtaz K.
MATERIALS AND DESIGN , cilt.260, ss.1-20, 2025 (SCI-Expanded, Scopus) identifier identifier

7. Techno-economic Analysis of Green Methanol and Ammonia Production in Turkey

Aydın K., Aydın A.
WSEAS TRANSACTIONS ON ENVIRONMENT AND DEVELOPMENT , cilt.21, ss.648-654, 2025 (Scopus)

8. Metallization of 3D Printed Polylactic Acid Polymer Structures via Radio-Frequency Sputtering

Aktitiz İ., Darıcık F., Aydın A., AYDIN K.
Journal of Materials Engineering and Performance , cilt.34, sa.10, ss.8610-8624, 2025 (SCI-Expanded, Scopus) identifier identifier

9. Novel use of laser melting and optical pre-heat to control white etching layer formation on rail steels

Yang Y., Aydin A., Mumtaz K., Januschewsky M., Meierhofer A., Lewis R.
TRIBOLOGY INTERNATIONAL , cilt.204, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

10. Diode area melting of SS316L using low power 450 nm lasers

Erman S. C., Aydin A., Groom K., Mumtaz K.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.136, sa.10, ss.4471-4490, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

11. Laser powder bed fusion of Ti6Al4V using low-cost high efficiency 450 nm diode point melting

Aydin A., Cetin E., Erman S. C., Mumtaz K.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.34, ss.2814-2827, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

12. Dual-laser powder bed fusion using 450 nm diode area melting and 1064 nm galvo-scanning fiber laser sources

Caglar H., Aydin A., GÜLENÇ İ. T., Groom K., Mumtaz K.
Materials and Design , cilt.248, 2024 (SCI-Expanded, Scopus) identifier

13. Developments in World Motor Vehicle Production and the Future of Hydrogen Use in the Automotive Industry

Aydın K., Aydın A.
SOUTH FLORIDA JOURNAL OF DEVELOPMENT , cilt.5, sa.9, ss.1-16, 2024 (Hakemli Dergi)

14. Experimental investigations on metallization in the surface modified additively manufactured plastic substrates using DC sputtering

Aktitiz İ., Darıcık F., Aydın A., AYDIN K.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2024 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 6

1. Process Optimization of Diode Point Melting Using Ti6Al4V in Laser Powder Bed Fusion

Aydın A., Çetin E., Erman S. C., Mumtaz K.
The 35th Annual International Solid Freedom Fabrication Symposium, Texas, Amerika Birleşik Devletleri, 10 - 13 Ağustos 2024, ss.35, (Özet Bildiri)

2. Multi-Laser Powder Bed Fusion of Cu10Sn Using Low-Power 450nm Diode Lasers

Çetin E., Aydın A., Erman S. C., Mumtaz K.
The 35th Annual International Solid Freedom Fabrication Symposium, Texas, Amerika Birleşik Devletleri, 10 - 13 Ağustos 2024, ss.1302-1317, (Tam Metin Bildiri)

3. Parametric Investigation of Single-Layer Stainless Steel 316L with Novel Laser Powder Bed Fusion Technology: Diode Area Melting with 450nm Blue Lasers

Erman S. C., Aydın A., Liang A., Mumtaz K.
The 35th Annual International Solid Freedom Fabrication Symposium, Texas, Amerika Birleşik Devletleri, 10 - 13 Ağustos 2024, ss.1329-1342, (Tam Metin Bildiri)

4. The Use of Laser Preheating for Microstructural Customization of Ti6Al4V Processed Using Diode Point Melting System

Aydın A., Mumtaz K.
The 34th Annual International Solid Freedom Fabrication Symposium, Texas, Amerika Birleşik Devletleri, 14 - 16 Ağustos 2023, ss.74, (Özet Bildiri)

5. Diode Area Melting – A Multi-laser Alternative to Traditional Laser Powder Bed Fusion

Liang A., Alsaddah M., Aydın A., Groom K., Mumtaz K.
The 34th Annual International Solid Freedom Fabrication Symposium, Texas, Amerika Birleşik Devletleri, 14 - 16 Ağustos 2023, ss.98, (Özet Bildiri)

6. Manuel Metal İşleme Tezgâhlarını CNC Tezgâhlara Dönüştüren Üniversal Dönüşüm Kitinin Geliştirilmesi

Aydın K., Karasoy S., Aydın A., Yıldız O.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.707-714, (Tam Metin Bildiri)
Metrikler

Yayın

20

Yayın (WoS)

12

Yayın (Scopus)

13

Atıf (WoS)

5

H-İndeks (WoS)

1

Atıf (Scopus)

5

H-İndeks (Scopus)

1

Proje

7

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları