Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Age-Hardening Responses of Al-Cu Alloy Powders Processed by Equal Channel Angular Pressing

Sarıtaş G., Tekeli S., Taşkesen A., Demir Ü., Güral A.
Physics Of Metals And Metallography , cilt.121, sa.14, ss.114-124, 2020 (SCI-Expanded)

The Effect of Aging and Burnishing Treatment on Parts Joined by Friction Stir Welding

Sonmez F., BAŞAK H., GÜRAL A., TAŞKESEN A.
JOURNAL OF TESTING AND EVALUATION , cilt.48, sa.5, ss.3883-3893, 2020 (SCI-Expanded) identifier identifier

The effect of cryogenic treatment on ageing behaviour of B4C reinforced 7075 aluminium composite

Taskesen A., Aksoz S., Ozdemir A. T.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.1, ss.57-67, 2017 (SCI-Expanded) Creative Commons License identifier identifier

Analysis of thrust force in drilling B4C-reinforced aluminium alloy using genetic learning algorithm

TAŞKESEN A., ALDAŞ K., Ozkul I., Kutukde K., ZÜMRÜT Y.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.75, ss.237-245, 2014 (SCI-Expanded) identifier identifier

EXPERIMENTAL INVESTIGATION AND OPTIMISATION IN DRILLING OF AZ31 MAGNESIUM ALLOY USING GREY RELATIONAL ANALYSIS

Taskesen A.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.20, sa.3, ss.325-338, 2014 (SCI-Expanded) identifier identifier

Experimental investigation and multi-objective analysis on drilling of boron carbide reinforced metal matrix composites using grey relational analysis

TAŞKESEN A., Kutukde K.
MEASUREMENT , cilt.47, ss.321-330, 2014 (SCI-Expanded) identifier identifier

Analysis and optimization of drilling parameters for tool wear and hole dimensional accuracy in B4C reinforced Al-alloy

Taskesen A., Kutukde K.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.23, sa.9, ss.2524-2536, 2013 (SCI-Expanded) identifier identifier

OPTIMIZATION OF THE DRILLING PARAMETERS FOR THE CUTTING FORCES IN B4C-REINFORCED A1-7XXX-SERIES ALLOYS BASED ON THE TAGUCHI METHOD

TAŞKESEN A., Kutukde K.
MATERIALI IN TEHNOLOGIJE , cilt.47, sa.2, ss.169-176, 2013 (SCI-Expanded) identifier

APPLICATION OF BURNISHING PROCESS ON FRICTION STIR WELDING AND INVESTIGATION OF THE EFFECT OF BURNISHING PROCESS ON THE SURFACE ROUGHNESS, HARDNESS AND STRENGTH

Basak H., Ozkan S., Taskesen A.
EXPERIMENTAL TECHNIQUES , cilt.35, sa.1, ss.8-16, 2011 (SCI-Expanded) identifier identifier

The effects of cutting speed and feed rate on BUE-BUL formation, cutting forces and surface roughness when machining AA6351 (T6) alloy

Gokkaya H., TAŞKESEN A.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.54, ss.521-530, 2008 (SCI-Expanded) identifier identifier

Comprehensive gearbox design using expert system techniques

Basak H., TAŞKESEN A.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.16, sa.2, ss.157-164, 2008 (SCI-Expanded) identifier identifier

Comprehensive design of rotating shafts and a software for designing and selecting of rolling-contact bearings

Taskesen A., Mendi F., Kulekci M. K., Basak H.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.15, sa.3, ss.214-225, 2007 (SCI-Expanded) identifier identifier

The effects of a tool's chemical composition on its performance when turning inconel 718 with ceramic inserts

Altin A., Taskesen A., Nalbant M., Seker U.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.53, sa.6, ss.379-385, 2007 (SCI-Expanded) identifier identifier

The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools

Altin A., Nalbant M., Taskesen A.
MATERIALS & DESIGN , cilt.28, sa.9, ss.2518-2522, 2007 (SCI-Expanded) identifier identifier

Deformation analysis of boring bars using analytical and finite element approaches

Taskesen A., Mendi F., Kisioglu Y., Kulekci M. K.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.52, sa.3, ss.161-169, 2006 (SCI-Expanded) identifier identifier

Computer-aided shaft design and selection of rolling-contact bearings using an expert system

Mendi F., Taskesen A., Kisioglu Y.
SIMULATION , cilt.76, sa.3, ss.151-159, 2001 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Experimental Investigation On The Machinability ofIron Based Superalloys

TAŞKESEN A., KAYIR Y., BIYIK O.
International Journal of Mechanical and Production Engineering (IJMPE) , 2019 (Hakemli Dergi)

Effect of sub-Zero Treatment on Ageing of Aluminium Composite

Taşkesen A., Özdemir A. T., Aksoz S.
International Journal of Materials, Mechanics and Manufacturing , cilt.6, sa.1, ss.26-30, 2018 (Hakemli Dergi)

Invesitgation of Drilling Parameters on Thrust Force on AZ91 Magnesium Alloy by Genetic Expression Programming

ALDAŞ K., ÖZKUL İ., TAŞKESEN A., KAYIR Y.
Düzce University Journal of Science & Technology , cilt.2, sa.1, ss.169-177, 2014 (Hakemli Dergi)

Mekanik ve Makina Elemanları Derslerinin Ogretimi Icin Web Tabanlı Uzaktan Eğitim Ortamı Gelistirilmesi

TAŞKESEN A., Cihangir C.
Teknolojik Arastirmalar: Makine Teknolojileri , cilt.1, ss.17-31, 2008 (Hakemli Dergi) Sürdürülebilir Kalkınma

Computer Aided NonLinear Analysis of Machine Tool Vibrations and A Developed Computer Software

TAŞKESEN A., ERCAN Y.
Journal of Mathematical and Computational Applications, , cilt.10, sa.3, ss.377-385, 2005 (Hakemli Dergi)

Bir Uzman Sistem Kullanarak Zımpara Taşı Seçimi

TAŞKESEN A., GÜLESİN M.
Gazi Üniversitesi Fen Bilimleri Enstitüsü , ss.1-16, 2000 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Experimental Invvesitgation on the Machinabilty of iron based superalloys

TAŞKESEN A., Bıyık O., KAYIR Y.
ISER 2016th International Conference, Kiev, Ukrayna, 17 - 18 Ağustos 2019, ss.22-26

Effect of Sub Zero Treatment on Ageing of Aluminium Composite

Taşkesen A., Aksöz S., Özdemir A. T.
2nd International Conference on Advances in Engineering Materials: ICAEM2016, Constanta, Romanya, 29 Haziran - 02 Temmuz 2016, ss.485-491

Modelling for Prediction of cutting forces and surface roughness in drilling magnesium alloy

TAŞKESEN A., KAYIR Y., ZÜMRÜT Y.
21st International Scientific Conference, Mechanika 2016, Kaunas, Litvanya, 12 - 13 Mayıs 2016, cilt.1, ss.265-271

Modelling for prediction of cutting forces and surface roughness in drilling AZ31 magnesium alloys

TAŞKESEN A., KAYIR Y., ZÜMRÜT Y.
Proceedings of 21st International Scientific Conference MECHANIKA 2016, Kaunas University of Technology, Lithuania, Kaunas, Kaunas, Litvanya, 12 - 13 Mayıs 2016, ss.265-271 identifier

Modelling for prediction of cutting forces and surface roughness in drilling AZ31 magnesium alloys

TAŞKESEN A., KAYIR Y., ZÜMRÜT Y.
21st International Scientific Conference: Mechanika 2016, Kaunas, Litvanya, 12 Mayıs 2016, cilt.1, ss.265-271 identifier
Kitap & Kitap Bölümleri

SolidWorks Çizim Modelleme Analiz

Faruk M., KİŞİOĞLU Y., TAŞKESEN A.
Gazi Kitapevi, 2013

AutoCAD ile Çizim ve Modelleme

Mendi F., Taşkesen A., Toktaş İ., Eldem C.
Gazi Kitapevi, Ankara, 2008
Metrikler

Yayın

30

Atıf (WoS)

303

H-İndeks (WoS)

8

Atıf (Scopus)

310

H-İndeks (Scopus)

6

Atıf (Scholar)

26

H-İndeks (Scholar)

1

Atıf (Diğer Toplam)

1

Proje

3

Tez Danışmanlığı

6

Açık Erişim

5
BM Sürdürülebilir Kalkınma Amaçları