Prof. VOLKAN YILMAZ

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

EFFECT OF FIBER-LAYER POSITIONS ON MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED MATERIALS MANUFACTURED BY FUSED DEPOSITION MODELING

Polat Y. F., Yylmaz V.

MATERIALI IN TEHNOLOGIJE , vol.56, no.3, pp.279-287, 2022 (SCI-Expanded)

Analysis and optimisation of the cutting parameters based on machinability factors in turning AISI 4140 steel

ÖZDEMİR M., Sahinoglu A., Rafighi M., YILMAZ V.

CANADIAN METALLURGICAL QUARTERLY , vol.61, no.4, pp.407-417, 2022 (SCI-Expanded)

EFFECT OF THE MQL TECHNIQUE ON CUTTING FORCE AND SURFACE QUALITY DURING THE SLOT MILLING OF TITANIUM ALLOY

Osman K. A., YILMAZ V., ÜNVER H. Ö., ŞEKER U., KILIÇ S. E.

MATERIALI IN TEHNOLOGIJE , vol.56, no.1, pp.3-10, 2022 (SCI-Expanded)

Slot milling of titanium alloy with hexagonal boron nitride and minimum quantity lubrication and multi-objective process optimization for energy efficiency

Osman K. A., YILMAZ V., ÜNVER H. Ö., ŞEKER U., KILIÇ S. E.

JOURNAL OF CLEANER PRODUCTION , vol.258, 2020 (SCI-Expanded) Sustainable Development

Optimization and predictive modeling using S/N, RSM, RA and ANNs for micro-electrical discharge drilling of AISI 304 stainless steel

SARIKAYA M., YILMAZ V.

NEURAL COMPUTING & APPLICATIONS , vol.30, no.5, pp.1503-1517, 2018 (SCI-Expanded)

Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy

SARIKAYA M., YILMAZ V., GÜLLÜ A.

JOURNAL OF CLEANER PRODUCTION , vol.133, pp.172-181, 2016 (SCI-Expanded) Sustainable Development

INVESTIGATION OF HOLE PROFILES IN DEEP MICRO-HOLE DRILLING OF AISI 420 STAINLESS STEEL USING POWDER-MIXED DIELECTRIC FLUIDS

YILMAZ V.

MATERIALI IN TEHNOLOGIJE , vol.50, no.5, pp.667-675, 2016 (SCI-Expanded)

Modeling and multi-response optimization of milling characteristics based on Taguchi and gray relational analysis

SARIKAYA M., YILMAZ V., DİLİPAK H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , vol.230, no.6, pp.1049-1065, 2016 (SCI-Expanded)

Optimization of the wear behavior of uncoated, TiN and AlTiN coated cold work tool steel 1.2379 using response surface methodology

Bulbul A. E., DİLİPAK H., SARIKAYA M., Yilmaz V.

MATERIALS TESTING , vol.58, no.1, pp.12-19, 2016 (SCI-Expanded)

Deep micro-hole drilling of Hardox 500 by electro-discharge machining

YILMAZ V.

MATERIALS TESTING , vol.58, no.1, pp.69-74, 2016 (SCI-Expanded)

DEEP MICRO-HOLE DRILLING FOR HADFIELD STEEL BY ELECTRO-DISCHARGE MACHINING (EDM)

YILMAZ V., SARIKAYA M., DİLİPAK H.

MATERIALI IN TEHNOLOGIJE , vol.49, no.3, pp.377-386, 2015 (SCI-Expanded)

INVESTIGATION OF VIBRATIONS AND STATISTICAL ANALYSIS IN MILLING OF AISI 1050 STELL WITH CARBIDE TOOLS

DİLİPAK H., YILMAZ V.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.27, no.2, pp.285-294, 2012 (SCI-Expanded)

Articles Published in Other Journals

Optimization of the Effect of Cutting Parameters on the Cutting Force in the Gradual Turning Process by Taguchi Method

İYNEN O., ŞAHİNOĞLU A., ÖZDEMİR M., YILMAZ V.

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.10, no.3, pp.1909-1918, 2020 (Peer-Reviewed Journal)

Experimental and Statistical Analysis of Surface Roughness in Micro-Deep Hole Drilling of AISI 1040 Steel

YILMAZ V., SARIKAYA M., YAMAN YILMAZ C., MERAL G., DİLİPAK H.

Journal Of The Balkan Tribological Association , vol.22, no.4, pp.4299-4311, 2016 (Scopus)

Investigation of Material Removal and Electrode Wear Rates In Deep Micro Hole Drilling Using Powder Mixed Dielectric Fluids

YILMAZ V.

Journal Of The Balkan Tribological Association , vol.22, no.4, pp.3804-3822, 2016 (Scopus)

Characterization of Microstructure and Bending Response of Sheet Material Influence of Thickness

ÖZDEMİR M., GÖKMEŞE H., DİLİPAK H., YILMAZ V.

Journal of Advanced Materials and Processing , vol.3, no.1, pp.3-14, 2015 (Peer-Reviewed Journal)

Aşınmaya Karşı Dirençli Sac Malzemenin Mikro Yapısal Karakterizasyonu Ve Şekillendirilebilirliğinin İncelenmesi

ÖZDEMİR M., GÖKMEŞE H., DİLİPAK H., YILMAZ V.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.3, no.1, pp.385-393, 2015 (Peer-Reviewed Journal) Sustainable Development

The Development of Microstructure and Mechanical Properties of Cr Mo High Temperature Steel in Different Heat Treated State

ÖZDEMİR M., GÖKMEŞE H., YILMAZ V.

Journal of Basic and Applied Research International , vol.11, no.4, pp.198-205, 2015 (Peer-Reviewed Journal)

AISI 1040 Çeliğinin Elektro Erozyon İle İşleme Yöntemiyle Delinmesinde İşleme Parametrelerinin Temel Performans Çıktıları Üzerindeki Etkilerinin İncelenmesi

YILMAZ V., ÖZDEMİR M., DİLİPAK H.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.3, no.1, pp.417-426, 2015 (Peer-Reviewed Journal)

Elektro Erozyon İşleme ile Mikro Derin Deliklerin Delinmesinde Delik Profilinin İncelenmesi

YILMAZ V., ÖZDEMİR M., DİLİPAK H.

International Journal of Scientific and Technological Research , vol.1, no.3, pp.57-65, 2015 (Peer-Reviewed Journal)

The Examining of Hole Profile for Drilling Micro Size Deep Holes With Electro Discharge Machining

YILMAZ V., ÖZDEMİR M., DİLİPAK H.

International Journal of Scientific and Technological Research , vol.1, no.3, 2015 (Peer-Reviewed Journal)

The modeling of results of cutting force vibration and surface roughness in milling operations

YILMAZ V., DİLİPAK H., SARIKAYA M., YAMAN YILMAZ C., ÖZDEMİR M.

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.30, no.4, pp.220-2206, 2014 (Peer-Reviewed Journal)

Optimization of Parameters Affecting the Vibration and Surface Roughness in Milling Operations

YILMAZ V., DİLİPAK H., SARIKAYA M., YAMAN YILMAZ C., MERAL G.

SDÜ Teknik Bilimler Dergisi , vol.4, no.1, pp.37-44, 2014 (Peer-Reviewed Journal)

Frezeleme işlemlerinde kesme kuvveti titreşim ve yüzey pürüzlülüğüsonuçlarının modellenmesi

YILMAZ V., DİLİPAK H., SARIKAYA M., YAMAN YILMAZ C., ÖZDEMİR M.

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.30, no.4, pp.220-226, 2014 (Peer-Reviewed Journal)

Frezeleme İşlemlerinde Titreşimi ve Yüzey Pürüzlülüğünü Etkileyen Parametrelerin Optimizasyonu

YILMAZ V., DİLİPAK H., SARIKAYA M., YAMAN YILMAZ C., MERAL G.

S.D.Ü. Teknik Bilimler Dergisi , vol.4, no.1, pp.37-44, 2014 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Investigation of effect of minimum quantity lubrication technique on surface roughness during milling of titanium alloy (Ti-6Al-4V)

KHALED A. O., YILMAZ V., ÜNVER H. Ö., ŞEKER U., KILIÇ S. E.

The 18th International Conference on Machine Design and Production, 3 - 06 July 2018, pp.345-354

ELEKTRO EROZYON İLE DELİK DELME İŞLEMLERİNDE DİELEKTRİK SIVISINA KARBON TOZU KATILMASI VE KARBON TOZUNUN İŞLEME HIZINA ETKİSİ

SARIKAYA M., YILMAZ V., MERAL G., ŞEKER U.

1st International Turkish World Engineering and Science Congress, 7 - 10 December 2017

TOZ KATKILI DİELEKTRİK SIVISI İLE DERİN DELİK DELMEİŞLEMLERİNDE İŞLEME PERFORMANSI İÇİN EEİPARAMETRELERİNİN OPTİMİZASYONU

SARIKAYA M., YILMAZ V., MERAL G., ŞEKER U.

1st International Turkish World Engineering and Science Congress, 7 - 10 December 2017

Multi-Objective Optimization Using Grey Relational Analysis in Electrical Discharge Drilling of AISI 304 Stainless Steel

Meral G., Sarıkaya M., Yılmaz V., Özdemir V., Ayhan E.

IV.International Multidisciplinary Congress of Eurasian, Rome, Italy, 23 - 25 August 2017

Farklı Isıl İşlem Görmüş Formadur 2738 Malzemesinin EDM ile Mikro Delinmesinde Elektrot Aşınma Hızının Araştırılması

YİRMİBEŞ Z. S., DİLİPAK H., SARIKAYA M., YILMAZ V.

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), April 6-8, 2016, Nevsehir, Turkey, 6 - 08 April 2016, pp.624-628 Sustainable Development

Farklı Isıl İşlem Görmüş Formadur 2738 Malzemesinin EEİ ile Mikro Delinmesinde İşleme Hızının Araştırılması

YİRMİBEŞ Z. S., DİLİPAK H., SARIKAYA M., YILMAZ V.

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), April 6-8, 2016, Nevsehir, Turkey, 6 - 08 April 2016, pp.1023-1027