Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

FEM Based Multi-Criterion Design and Implementation of a PM Synchronous Wind Generator by Fully Coupled Co-Simulation

ADVANCES IN ELECTRICAL AND COMPUTER ENGINEERING, vol.18, no.1, pp.37-42, 2018 (Journal Indexed in SCI) identifier identifier

Design, analysis and experimental verification of an efficient 2 kW permanent magnet synchronous generator for WPAs

International Review of Electrical Engineering, vol.8, no.2, pp.603-607, 2013 (Journal Indexed in SCI Expanded) identifier

Articles Published in Other Journals

Hafif Elektrikli Araçlar için Asenkron Motor Tasarımı ve Uygulaması

European Journal of Science and Technology, no.26, pp.228-233, 2021 (Refereed Journals of Other Institutions)

Hibrit Yapılı Rotor Sargısının Asenkron Motor Verimliliği ve Performansı Üzerindeki Etkisinin İncelenmesi

European Journal of Science and Technology, no.26, pp.242-246, 2021 (Refereed Journals of Other Institutions)

Akarsu Tipi Hidroelektrik Santraller ve Bu Santrallerde Kullanılan Türbin-Generatörler

Mühendislik Bilimleri ve Araştırmaları Dergisi, vol.2, no.2, pp.69-75, 2020 (Refereed Journals of Other Institutions)

A comparative analysis of four-pole brushless DC motors with different slot and winding arrangement based on THD values

International Journal of Energy Applications and Technologies, vol.7, no.1, pp.7-12, 2020 (Refereed Journals of Other Institutions)

Bir Elektromanyetik Fırlatıcı Bobininde Mermiye Etkiyen Kuvvetin Çok Katmanlı Sinir Ağı ile Kestirimi

Sakarya University Journal of Computer and Information Sciences, vol.1, no.3, pp.1-10, 2018 (Refereed Journals of Other Institutions)

DESIGN PARAMETERS OPTIMIZATION OF ASYNCHRONOUSMOTOR BY USING ARTIFICIAL BEE COLONY ALGORITHM ANDINVESTIGATING EFFECTS OF USING DIFFERENT FITNESSFUNCTIONS ON EFFICIENT

International Journal of Electrical, Electronics and Data Communication, vol.6, no.6, pp.16-19, 2018 (Refereed Journals of Other Institutions)

FEA-Based Design Improvement of Small Scale BLDCMs Considering Magnet Thickness and Pole Embrace

International Journal of Computing, Communication and Instrumentation Engineering, vol.4, no.2, pp.31-35, 2017 (Refereed Journals of Other Institutions)

A COMPARATIVE STUDY AND INVESTIGATION OF DIFFERENT ROTOR DESIGNS OF INDUCTION MOTOR FOR URBAN USE ELECTRIC VEHICLE

International Journal of Industrial Electronics and Electrical Engineering, vol.5, no.3, pp.10-12, 2017 (Refereed Journals of Other Institutions)

Comparatıve study and investigation of different rotor designs of induction motor for urban use electric vehicle

International Journal of Industrial Electronics and Electrical Engineering,, vol.5, no.3, pp.10-12, 2017 (Refereed Journals of Other Institutions)

Advancing Pole Arc Offset Points in Designing an Optimal PM Generator

TEM JOURNAL-TECHNOLOGY EDUCATION MANAGEMENT INFORMATICS, vol.5, no.2, pp.126-132, 2016 (Journal Indexed in ESCI) identifier

Investigation Effects of Narrowing Rotor Pole Embrace to Efficiency and Cogging Torque at PM BLDC Motor

TEM JOURNAL-TECHNOLOGY EDUCATION MANAGEMENT INFORMATICS, vol.5, no.1, pp.25-31, 2016 (Journal Indexed in ESCI) identifier

OPTIMUM ROTOR DESIGN OF SMALL PM BLDC MOTOR BASED ON HIGH EFFICIENCY CRITERIA

ARPN Journal of Engineering and Applied Sciences, vol.10, no.19, pp.9127-9132, 2015 (Refereed Journals of Other Institutions) identifier

Influence Of Pole Arc Offset On The Field And Output Parameters Of Brushless Dc Motors

International Journal of Advancements in Electronics and Electrical Engineering – IJAEEE, vol.3, no.1, pp.47-51, 2014 (Refereed Journals of Other Institutions)

Refereed Congress / Symposium Publications in Proceedings

Permanent Magnet Wind Generators: Neodymium vs. Ferrite Magnets

IEEE 2021 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA), Ankara, Turkey, 11 - 13 July 2021, pp.1-6

Optimization of PMSM Design ParametersUsing Update Meta-heuristic Algorithms

InternationalConference on Artificial Intelligenceand Applied Mathematics in Engineering, 20 - 22 June 2019, pp.914-934

Influence of Rotor Slot Structure at Starting Torque and Efficiency on Urban Use EV Motor

5th International Conference on Power Generation Systems and Renewable Energy Technologies, 26 - 27 August 2019 identifier

TOTAL HARMONIC DISTORTION OF V-SHAPED IPMSM MOTORS BASED ON MAGNET STRUCTURE

8th International Conference on Advanced Technologies (ICAT’xx19, Sarajevo, Bosnia And Herzegovina, 26 - 30 August 2019, pp.66-69

The Total Harmonic Distortion of V-Shaped IPMSM Motors Based on Magnet Structure

8th International Conference on Advanced Technologies, 26 - 30 August 2019

BANDIRMA BÖLGESİNDEKİ ÇİFTLİK KULLANIMINA UYGUN SABİT MIKNATISLI SENKRON GENERATÖR TASARIMI VE ANALİZİ

ULUSLARARASI BANDIRMA VE ÇEVRESİ SEMPOZYUMU (UBS’18), 17 - 19 September 2018, pp.417-426

DESIGN AND PERFORMANCE COMPARISON OF FOUR-POLE BRUSHLESS DC MOTORS WITH DIFFERENT POLE/SLOT COMBINATIONS

3rd International Energy Engineering Congress, 18 - 19 October 2018, pp.71-81

GÖMÜLÜ MIKNATISLI SENKRON MOTORLARIN GEOMETRİ TABANLI AKI BARİYERİ OPTİMİZASYONU

III. Uluslararası Rating Academy Kongresi: Uygulamalı Bilimler, 6 - 07 September 2018

FARKLI MIKNATIS MALZEMELERİNİN YÜZEY MIKNATISLI DOĞRUDAN TAHRİKLİ SABİT MIKNATISLI SENKRON MOTOR PERFORMANSINA ETKİSİ

III. INTERNATIONAL RATING ACADEMY CONGRESS ON APPLIED SCIENCES, Lviv, Ukraine, 6 - 07 September 2018

DESIGN AND PERFORMANCE COMPARISON OF DIFFERENTCONFIGURATION OUTER ROTOR BRUSHLESS DC MOTORS FOR ELECTRIC VEHICLES

1st International Turkish World Engineering and Science Congress, Antalya, Turkey, 7 - 10 December 2017

IMPROVEMENT OF STARTING AND SYNCHRONIZATIONPERFORMANCE IN LINE-START PERMANENT MAGNET SYNCHRONOUS MOTORS

1st International Turkish World Engineering and Science Congress, Antalya, Turkey, 7 - 10 December 2017, pp.41

FEA-Based Design Improvement of Small Scale BLDCMs Considering Magnet Thickness and Pole Embrace

6th PARIS International Conference on “Recent Trends in Engineering and Technology”, Paris, France, 25 - 26 April 2017

Comparatıve study and investigation of different rotor designs of induction motor for urban use electric vehicle

127th International Conference on Recent Innovations in Engineering and Technology, Mekke, Saudi Arabia, 23 - 24 January 2017

An Induction Motor Design for Urban Use Electric Vehicle

17th IEEE International Power Electronics and Motion Control Conference (PEMC), Varna, Bulgaria, 25 - 30 September 2016, pp.261-266 identifier identifier

Optimum rotor design of small PM BLDC motor based on high efficiency criteria

Internatıonal Conference On Electrıcal And Electronıc Engıneerıng (Ic3e2015), Malekka, Malaysia, 10 - 11 August 2015, vol.10, pp.9128-9132

INFLUENCE OF POLE ARC OFFSET ON THE FIELD AND OUTPUT PARAMETERS OF BRUSHLESS DC MOTORS

FTEE-2013 Proc. of the Intl. Conf. on Future Trends in Electronics and Electrical Engineering, Bangkok, Thailand, 13 - 14 July 2013, pp.16-20

The development of GPRS based speed regulator for DC motor

IEEE 4th International Conference on Power Engineering, Energy and Electrical Drives, Istanbul, Turkey, Turkey, 13 - 17 May 2013, vol.1, pp.1082-1086

Performance aspects and verifications of in runner and out runner permanent magnet synchronous generator designs of the same magnet structure for low speed wind systems

IEEE 11th International Conference on Environment and Electrical Engineering, Venice, Italy, Italy, 18 - 25 May 2012, vol.1, pp.440-445

CAD based design analysis and experimental verification of an out runner permanent magnet synchronous generator for small scale wind turbines

IEEE 11th International Conference on Environment and Electrical Engineering, Venice, Italy, Italy, 18 - 25 May 2012, vol.1, pp.179-183

Investigation of the effect of magnet thickness on output power and torque of PM BLDC machines using parametric approach method

IEEE 3th International Conference on Power Engineering, Energy and Electrical Drives, Malaga, Spain, Spain, 11 - 13 May 2011, vol.1, pp.1-4

Investigation of the effect of magnet thickness on motor losses of PM BLDC machines using parametric approach method

IEEE 3th International Conference on Power Engineering, Energy and Electrical Drives, Malaga, Spain, Spain, 11 - 13 May 2011, vol.1, pp.1-4

Books & Book Chapters