Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Effects of Some Machining Parameters on Noise Level in Planing of Some Wood Materials

Durcan F. M., BURDURLU E.
BIORESOURCES, vol.13, no.2, pp.2702-2714, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Effect of Glass Wool and Stone Wool Additives on Some Mechanical Properties of Wood Composites

ÜLKER O., BURDURLU E.
BIORESOURCES, vol.11, no.3, pp.5974-5986, 2016 (SCI-Expanded) Creative Commons License identifier identifier

SOME MECHANICAL PROPERTIES OF DENSIFIED AND LAMINATED LOMBARDY POPLAR (POPULUS NIGRA L.)

ÜLKER O., BURDURLU E.
WOOD RESEARCH, vol.61, no.6, pp.959-970, 2016 (SCI-Expanded) identifier identifier

Surface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatment

Pelit H., BUDAKÇI M., SÖNMEZ A., BURDURLU E.
JOURNAL OF WOOD SCIENCE, vol.61, no.6, pp.586-594, 2015 (SCI-Expanded) identifier identifier

Effects of Some Mineral Wools and Adhesives on Burning Characteristics of Particleboard

ÜLKER O., BURDURLU E.
BIORESOURCES, vol.10, no.2, pp.3775-3789, 2015 (SCI-Expanded) Creative Commons License identifier identifier

Effect of Densification Temperature and Some Surfacing Techniques on the Surface Roughness of Densified Scots Pine (Pinus sylvestris L.)

İMİRZİ H. Ö., ÜLKER O., BURDURLU E.
BIORESOURCES, vol.9, no.1, pp.191-209, 2014 (SCI-Expanded) identifier identifier

The effect of densificatoin temperature on some physical ans mechanical properties of scots pine (Pinus sylvestris L.)

Ulker O., Imirzil O., BURDURLU E.
BioResources, vol.7, no.4, pp.5581-5592, 2012 (SCI-Expanded) identifier

THE EFFECT OF DENSIFICATION TEMPERATURE ON SOME PHYSICAL AND MECHANICAL PROPERTIES OF SCOTS PINE (PINUS SYLVESTRIS L.)

ÜLKER O., Imirzi O., BURDURLU E.
BIORESOURCES, vol.7, no.4, pp.5581-5592, 2012 (SCI-Expanded) identifier

DIAGONAL TENSILE STRENGTH OF AN ORIENTED STRAND-BOARD (OSB) FRAME WITH DOVETAIL CORNER JOINT

ÖZKAYA K., BURDURLU E., Ilce A. C., CİRİTCİOĞLU H. H.
BIORESOURCES, vol.5, no.4, pp.2690-2701, 2010 (SCI-Expanded) identifier identifier

EFFECT OF ADHESIVE TYPE ON THE BENDING MOMENT CAPACITY OF MITER FRAME CORNER JOINTS

ALTUN S., BURDURLU E., Kilic M.
BIORESOURCES, vol.5, no.3, pp.1473-1483, 2010 (SCI-Expanded) identifier identifier

The effect of surface roughness on tensile strength of the medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC)

Kilic M., BURDURLU E., Aslan S., Altun S., Tumerdem O.
MATERIALS & DESIGN, vol.30, no.10, pp.4580-4583, 2009 (SCI-Expanded) identifier identifier

Effect of different layer structures on some resistance characteristics of high-pressure laminates

BURDURLU E., ÖZGENÇ Ö.
FOREST PRODUCTS JOURNAL, vol.59, no.4, pp.69-75, 2009 (SCI-Expanded) identifier identifier

THE BENDING MOMENT CAPACITIES OF MITRE FRAME CORNER JOINTS WITH DOVETAIL FITTINGS

Kilic M., BURDURLU E., ALTUN S., Berker U. O.
WOOD RESEARCH, vol.54, no.3, pp.79-88, 2009 (SCI-Expanded) identifier

Deformation analysis of curved laminated structural wood elements

Altinok M., Burdurlu E., ÖZKAYA K.
CONSTRUCTION AND BUILDING MATERIALS, vol.22, no.8, pp.1643-1647, 2008 (SCI-Expanded) identifier identifier

The effects of ply organization and loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL) obtained from beech (Fagus orientalis L.) and lombardy poplar (Populus nigra L.)

Burdurlu E., Kilic M., Ilce A. C., Uzunkavak O.
CONSTRUCTION AND BUILDING MATERIALS, vol.21, no.8, pp.1720-1725, 2007 (SCI-Expanded) identifier identifier

The effect of potassium carbonate, borax and wolmanit on the burning characteristics of oriented strandboard (OSB)

Ozkaya K., Cemil Ilce A., Burdurlu E., Aslan S.
CONSTRUCTION AND BUILDING MATERIALS, vol.21, no.7, pp.1457-1462, 2007 (SCI-Expanded) identifier identifier

The effect on shear strength of different surfacing techniques in Oriental beech (Fagus orientalis Lipsky) and Scotch pine (Pinus sylvestris L.) bonded joints

Burdurlu E., USTA İ., Kilic Y., Ulupinar M.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, vol.21, pp.319-330, 2007 (SCI-Expanded) identifier identifier

An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives

Kilic Y., Colak M., Baysal E., Burdurlu E.
FOREST PRODUCTS JOURNAL, vol.56, no.9, pp.56-59, 2006 (SCI-Expanded) identifier identifier

Effect of machining on surface roughness of wood

Kilic M., Hiziroglu S., Burdurlu E.
BUILDING AND ENVIRONMENT, vol.41, no.8, pp.1074-1078, 2006 (SCI-Expanded) identifier identifier

Shear strength of Calabrian pine (Pinus brutia Ten.) bonded with polyurethane and polyvinyl acetate adhesives

Burdurlu E., Kilic Y., Eli'bol G., Kilic M.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.100, no.6, pp.4856-4867, 2006 (SCI-Expanded) identifier identifier

The shear strength of Calabrian Pine (Pinus brutia Ten.) bonded with polyurethane and polyvinyl acetate adhesives

Burdurlu E., Kilic Y., Elibol G., Kilic M.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.99, no.6, pp.3050-3061, 2006 (SCI-Expanded) identifier identifier

Analysis of the most suitable fitting type for the assembly of knockdown panel furniture

Burdurlu E., Ciritcioglu H., Bakir K., Ozdemir M.
FOREST PRODUCTS JOURNAL, vol.56, no.1, pp.46-52, 2006 (SCI-Expanded) identifier

Articles Published in Other Journals

The Effect of Some Managerial Motivators on Employee Motivation in Furniture Enterprises

Kamışlı E., Yılmaz K., Öztürk Y., Burdurlu E.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, vol.10, no.3, pp.479-494, 2022 (Peer-Reviewed Journal) identifier

The Effect of Wood Species and Strip Width on Bending Strength and Modulus of Elasticity in End-Grain Core Blockboard

Öztürk Y., Yılmaz K., Burdurlu E.
Celal Bayar Üniversitesi Fen Bilimleri Dergisi, vol.18, no.1, pp.9-16, 2022 (Peer-Reviewed Journal) identifier

The Effect of Wood Veneer Lamination on the Flexural Strength of the Material Produced with 3D- Printed Material

Öztürk Y., Burdurlu E.
Bartın Orman Fakültesi Dergisi, vol.23, no.3, pp.885-891, 2021 (Peer-Reviewed Journal)

MOBİLYA ENDÜSTRİSİ ÜRETİM SÜREÇLERİNDETEKNOLOJİ SEÇİMİ: Panel Ebatlama Makinesi SeçimiÖrneklemesi

Yılmaz K., Öztürk Y., Burdurlu E.
İleri Teknoloji Bilimleri Dergisi, vol.6, no.3, pp.774-785, 2017 (Peer-Reviewed Journal)

ÇOK ÖLÇÜTLÜ KARAR VERME YAKLAŞIMI İLE MOBİLYA İŞLETMELERİ İÇİN HEDEF PAZAR SEÇİMİ

Yılmaz K., Öztürk Y., Burdurlu E.
İleri Teknoloji Bilimleri Dergisi, vol.6, no.3, pp.744-766, 2017 (Peer-Reviewed Journal)

VERİ MADENCİLİĞİ İLE TÜRKİYE MOBİLYA SEKTORÜ İÇİN 2023 ÖNGÖRÜLERİ

Öztürk Y., Yılmaz K., Burdurlu E.
İleri Teknoloji Bilimleri Dergisi, vol.6, no.3, pp.757-763, 2017 (Peer-Reviewed Journal)

Veri Madenciliği İle Türkiye Mobilya Sektörü İçin 2023 Öngörüleri

ÖZTÜRK Y., YILMAZ K., BURDURLU E.
İleri Teknoloji Bilimleri Dergisi, vol.6, no.3, pp.757-763, 2017 (Peer-Reviewed Journal)

The color preferences of consumers on furniture surfaces

CİRİTCİOĞLU H. H., İLÇE A. C., BURDURLU E.
The Online Journal of Science and Technology, vol.7, no.3, pp.98-108, 2017 (Peer-Reviewed Journal)

Farklı ağaç malzemelerde çekme yönü ve tutkal çeşidinin kavela çekme direncine etkilerinin belirlenmesi

ÇAĞATAY K., EFE H. H., BURDURLU E., KESİK H. İ.
KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY, vol.13, no.2, pp.182-191, 2013 (Peer-Reviewed Journal)

Bazı Ağaç Malzemelerin Vida Tutma Mukavemetlerinin Belirlenmesi

ÇAĞATAY K., EFE H. H., BURDURLU E., KESİK H. İ.
Kastamonu Üniversitesi Orman Fakültesi Dergisi, vol.12, no.2, pp.321-328, 2012 (Peer-Reviewed Journal)

Effect of layer arrangement on expansion bending strength and modulus of elasticity of solid wood veneer lumber from pine and poplar

KILIÇ Y., BURDURLU E., ELİBOL G. C.
GU Journal of Science, vol.23, no.1, pp.89-95, 2010 (Peer-Reviewed Journal) identifier

THE FIGURE PREFERENCES OF THE CONSUMERS ON THE PANEL FURNITURESURFACES

İLÇE A. C., Ciritçioğlu H. H., BURDURLU E., ALTUN S.
Technology, vol.13, no.4, pp.219-228, 2010 (Peer-Reviewed Journal)

Tüketicilerin Kullandıkları Döşemeli Mobilyalar ile ilgili Şikayetlerin Belirlenmesi

ARSLAN A. R., SÖNMEZ A., BURDURLU E.
POLİTEKNİK DERGİSİ, vol.13, no.4, pp.295-304, 2010 (Peer-Reviewed Journal)

Markalı Mobilya Tercihi Üzerine Kullanıcı Karakteristikleri ile Sosyo Ekonomik Özellikleri

ARSLAN A. R., DORUK Ş., BURDURLU E.
Politeknik Dergisi, vol.12, no.2, pp.25-34, 2009 (Peer-Reviewed Journal) Sustainable Development

Okul Öncesi Çocuk Oyuncaklarında Malzeme Kullanımı ve 4 6 Yaş Çocuklarının Renk Tercihleri

ELİBOL G. C., KILIÇ Y., BURDURLU E.
Aile ve Toplum, no.9, pp.35-43, 2006 (Peer-Reviewed Journal)

The Effect of the Number of Blades and the Grain Size of Abrasivesin Planing and Sanding on the Surface Roughness of EuropeanBlack Pine and Lombardy Poplar

BURDURLU E., ULUPINAR ÖZ M., Bora A., Tahsin Çağrı E.
Turkish Journal of Agriculture and Foretry, vol.29, no.4, pp.315-322, 2005 (Peer-Reviewed Journal)

LOCATION CHOICE FOR FURNITURE INDUSTRY FIRMS BY USING ANALYTIC HIERARCHY PROCESS AHP METHOD

BURDURLU E., Engin E.
Gazi University Journal, vol.16, no.2, pp.369-373, 2003 (Peer-Reviewed Journal)

AYAK KAYIT BİRLEŞTİRMELERDE KÖŞE TAKOZU VE BİRLEŞTİRME TİPİNİN EĞİLME DİRENCİNE ETKİLERİ

BURDURLU E., KILIÇ M., ALTUN S.
GÜ Fen Bilimleri Dergisi, vol.16, no.2, pp.357-367, 2003 (Peer-Reviewed Journal)

STATIC ANTHROPOMETRIC CHARACTERISTICS OF 12 15 AGED STUDENTS LIVING IN ANKARA TURKEY

BURDURLU E., USTA İ., İLÇE A. C., ALTUN S., ELİBOL G. C.
HÜ Sosyolojik Araştırmalar e Dergi, vol.13, pp.1-14, 2003 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Material Requirements Planning and ABC Analysis Applications in Furniture Industry…

BURDURLU E., SU M. E.
The XXIXTH International ConferenceResearch for Furniture Industry, 19 - 20 October 2019

Legal Requirements for Occupational Safety in the Wood-Based Products Industry and Analysis of Current Situation

Yılmaz K., Burdurlu E.
The XXIXth International Conference Research for Furniture Industry, Ankara, Turkey, 19 - 20 September 2019, pp.249-278

Literature Review on Development of Integrated Decision Support Systems and Latest Applications

Yılmaz K., Burdurlu E.
The XXIXth International Conference Research for Furniture Industry, Ankara, Turkey, 19 - 20 September 2019, pp.367-396

EFFECTS OF DENSIFICATION ON THE ROUGHNESS AND HARDNESS OF BALSAWOOD

ÖZTÜRK Y., BURDURLU E.
The XXIXTH International ConferenceResearch for Furniture Industry, 19 - 20 September 2019

An Application on the Assignment of the Most Proper Worker with the Hungarian Algorithm in the Furniture Manufacturing Processes

Yılmaz K., Su M. E., Burdurlu E.
International Forest Products Congress - ORENKO 2018, Trabzon, Turkey, 26 - 29 September 2018, pp.439-447

APPLICATION OF ABC ANALYSIS IN A LARGE-SCALE FURNITURE FACTORY

SU M. E., BURDURLU E.
International Forest Products Congress (ORENKO 2018), Trabzon, Turkey, 26 - 29 October 2018, pp.439-447

Technology Selection in Furniture Manufacturing Processes: Sampling of Panel Sizing Machine Selection

Yılmaz K., Öztürk Y., Burdurlu E.
4th International Furniture and Decoration Congress, Düzce, Turkey, 19 - 21 October 2017, pp.168-180

Target Market Selection for Furniture Companies with the Multiple Criteria Decision Making Approach

Yılmaz K., Öztürk Y., Burdurlu E.
4th International Furniture and Decoration Congress, Düzce, Turkey, 19 - 21 October 2017, pp.137-149

2023 Forecast for the Furniture Sector of Turkey with Data Mining

Öztürk Y., Yılmaz K., Burdurlu E.
4th International Furniture and Decoration Congress, Düzce, Turkey, 19 - 21 October 2017, pp.150-157

Ağaç Malzemenin Rendelenmesinde Bazı Malzeme Özelliklerinin Gürültü Emisyonuna Etkileri

BURDURLU E., ŞENER A. İ.
1st International mediterranean Science and Engineering Congress, Adana, Turkey, 26 October 2017 - 28 October 2016, pp.917-924

Effect of Densification Temperature with Different Cutting Angles on the Surface Roughnes of densified Scots Pine

ÜLKER O., BURDURLU E.
Yhe XXVIIth International Conference Research For Furniture Industry, 17 - 18 September 2015, pp.186-196

Determining the Surface Hardness of Densified and Heat Treatesd woods after water based varnishing

PELİT H., SÖNMEZ A., BURDURLU E., USTA İ.
XXVIIth International Conference Research For Furniture Industry, 17 - 18 September 2015, pp.554-563

Selection of the Most Suitable Edge Banding Machine With the Financial analysis Techniques

CİRİTCİOĞLU H. H., BURDURLU E., AKBULUT R.
The XXVIIth International Conference Research For Furniture Industry, 17 - 18 September 2015, pp.1-7

Determining the Surface Hardness of Some Densified and Heat Treated Woods After Water Based Varnishing

PELİT H., SÖNMEZ A., BURDURLU E., USTA İ.
XXVII International Conference-Researh for Furniture Industry, Ankara, Turkey, 17 - 18 September 2015, pp.554-563

Books & Book Chapters

Kereste Endüstrisi ve Kurutma

BURDURLU E.
Bizim Büro, Ankara, 1995

Ahşap Kökenli kaplama ve Levha Üretim kullanım Teknolojisi

BURDURLU E.
Bizim Büro, Ankara, 1994

Ağaçişlerinde Kesme Teorisi ve Mobilya Endüstrisi Makineleri

Rıfat İ., BURDURLU E., İbrahim B.
Bizim Büro, Ankara, 1990