Prof. Dr. EROL BURDURLU

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effect of the Mechanical Densification Process in Wood Material on the Surface Adhesion Strength of Varnishes

Atilgan A., BURDURLU E., ATAR M., Yasar S. S.

BioResources , cilt.19, sa.4, ss.7977-7989, 2024 (SCI-Expanded)

Artificial Neural Network-based Prediction Model to Minimize Dust Emission in the Machining Process

Singer H., Ilce A. C., Senel Y. E., BURDURLU E.

SAFETY AND HEALTH AT WORK , cilt.15, sa.3, ss.317-326, 2024 (SCI-Expanded)

An Artificial Neural Network–based Prediction Model to Minimize Dust Emission in the Machining Process

Singer H., İlçe A. C., Şenel Y. E., BURDURLU E.

Safety and Health at Work , cilt.15, sa.3, ss.317-326, 2024 (SCI-Expanded)

Selection of wooden furniture joints with multi-criteria decision-making techniques

Yilmaz K., Burdurlu E.

WOOD MATERIAL SCIENCE & ENGINEERING , cilt.19, sa.2, ss.311-326, 2024 (SCI-Expanded)

Effects of Some Machining Parameters on Noise Level in Planing of Some Wood Materials

Durcan F. M., BURDURLU E.

BIORESOURCES , cilt.13, sa.2, ss.2702-2714, 2018 (SCI-Expanded)

Effect of Glass Wool and Stone Wool Additives on Some Mechanical Properties of Wood Composites

ÜLKER O., BURDURLU E.

BIORESOURCES , cilt.11, sa.3, ss.5974-5986, 2016 (SCI-Expanded)

SOME MECHANICAL PROPERTIES OF DENSIFIED AND LAMINATED LOMBARDY POPLAR (POPULUS NIGRA L.)

ÜLKER O., BURDURLU E.

WOOD RESEARCH , cilt.61, sa.6, ss.959-970, 2016 (SCI-Expanded)

Surface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatment

Pelit H., BUDAKÇI M., SÖNMEZ A., BURDURLU E.

JOURNAL OF WOOD SCIENCE , cilt.61, sa.6, ss.586-594, 2015 (SCI-Expanded)

Effects of Some Mineral Wools and Adhesives on Burning Characteristics of Particleboard

ÜLKER O., BURDURLU E.

BIORESOURCES , cilt.10, sa.2, ss.3775-3789, 2015 (SCI-Expanded)

Effect of Densification Temperature and Some Surfacing Techniques on the Surface Roughness of Densified Scots Pine (Pinus sylvestris L.)

İMİRZİ H. Ö., ÜLKER O., BURDURLU E.

BIORESOURCES , cilt.9, sa.1, ss.191-209, 2014 (SCI-Expanded)

The effect of densificatoin temperature on some physical ans mechanical properties of scots pine (Pinus sylvestris L.)

Ulker O., Imirzil O., BURDURLU E.

BioResources , cilt.7, sa.4, ss.5581-5592, 2012 (SCI-Expanded)

THE EFFECT OF DENSIFICATION TEMPERATURE ON SOME PHYSICAL AND MECHANICAL PROPERTIES OF SCOTS PINE (PINUS SYLVESTRIS L.)

ÜLKER O., Imirzi O., BURDURLU E.

BIORESOURCES , cilt.7, sa.4, ss.5581-5592, 2012 (SCI-Expanded)

EFFECT OF ADHESIVE TYPE ON THE BENDING MOMENT CAPACITY OF MITER FRAME CORNER JOINTS

ALTUN S., BURDURLU E., Kilic M.

BIORESOURCES , cilt.5, sa.3, ss.1473-1483, 2010 (SCI-Expanded)

DIAGONAL TENSILE STRENGTH OF AN ORIENTED STRAND-BOARD (OSB) FRAME WITH DOVETAIL CORNER JOINT

ÖZKAYA K., BURDURLU E., Ilce A. C., CİRİTCİOĞLU H. H.

BIORESOURCES , cilt.5, sa.4, ss.2690-2701, 2010 (SCI-Expanded)

The effect of surface roughness on tensile strength of the medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC)

Kilic M., BURDURLU E., Aslan S., Altun S., Tumerdem O.

MATERIALS & DESIGN , cilt.30, sa.10, ss.4580-4583, 2009 (SCI-Expanded)

Effect of different layer structures on some resistance characteristics of high-pressure laminates

BURDURLU E., ÖZGENÇ Ö.

FOREST PRODUCTS JOURNAL , cilt.59, sa.4, ss.69-75, 2009 (SCI-Expanded)

THE BENDING MOMENT CAPACITIES OF MITRE FRAME CORNER JOINTS WITH DOVETAIL FITTINGS

Kilic M., BURDURLU E., ALTUN S., Berker U. O.

WOOD RESEARCH , cilt.54, sa.3, ss.79-88, 2009 (SCI-Expanded)

Deformation analysis of curved laminated structural wood elements

Altinok M., Burdurlu E., ÖZKAYA K.

CONSTRUCTION AND BUILDING MATERIALS , cilt.22, sa.8, ss.1643-1647, 2008 (SCI-Expanded)

The effects of ply organization and loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL) obtained from beech (Fagus orientalis L.) and lombardy poplar (Populus nigra L.)

Burdurlu E., Kilic M., Ilce A. C., Uzunkavak O.

CONSTRUCTION AND BUILDING MATERIALS , cilt.21, sa.8, ss.1720-1725, 2007 (SCI-Expanded)

The effect of potassium carbonate, borax and wolmanit on the burning characteristics of oriented strandboard (OSB)

Ozkaya K., Cemil Ilce A., Burdurlu E., Aslan S.

CONSTRUCTION AND BUILDING MATERIALS , cilt.21, sa.7, ss.1457-1462, 2007 (SCI-Expanded)

The effect on shear strength of different surfacing techniques in Oriental beech (Fagus orientalis Lipsky) and Scotch pine (Pinus sylvestris L.) bonded joints

Burdurlu E., USTA İ., Kilic Y., Ulupinar M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.21, ss.319-330, 2007 (SCI-Expanded)

An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives

Kilic Y., Colak M., Baysal E., Burdurlu E.

FOREST PRODUCTS JOURNAL , cilt.56, sa.9, ss.56-59, 2006 (SCI-Expanded)

Effect of machining on surface roughness of wood

Kilic M., Hiziroglu S., Burdurlu E.

BUILDING AND ENVIRONMENT , cilt.41, sa.8, ss.1074-1078, 2006 (SCI-Expanded)

Shear strength of Calabrian pine (Pinus brutia Ten.) bonded with polyurethane and polyvinyl acetate adhesives

Burdurlu E., Kilic Y., Eli'bol G., Kilic M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.100, sa.6, ss.4856-4867, 2006 (SCI-Expanded)

The shear strength of Calabrian Pine (Pinus brutia Ten.) bonded with polyurethane and polyvinyl acetate adhesives

Burdurlu E., Kilic Y., Elibol G., Kilic M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.99, sa.6, ss.3050-3061, 2006 (SCI-Expanded)

Analysis of the most suitable fitting type for the assembly of knockdown panel furniture

Burdurlu E., Ciritcioglu H., Bakir K., Ozdemir M.

FOREST PRODUCTS JOURNAL , cilt.56, sa.1, ss.46-52, 2006 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

The Effect of Some Managerial Motivators on Employee Motivation in Furniture Enterprises

Kamışlı E., Yılmaz K., Öztürk Y., Burdurlu E.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.10, sa.3, ss.479-494, 2022 (Hakemli Dergi)

The Effect of Wood Species and Strip Width on Bending Strength and Modulus of Elasticity in End-Grain Core Blockboard

Öztürk Y., Yılmaz K., Burdurlu E.

Celal Bayar Üniversitesi Fen Bilimleri Dergisi , cilt.18, sa.1, ss.9-16, 2022 (Hakemli Dergi)

3D Yazıcı ile Yazdırılmış Malzemede Ahşap Kaplama Laminasyonunun Eğilme Direncine Etkisi

Öztürk Y., Burdurlu E.

Bartın Orman Fakültesi Dergisi , cilt.23, sa.3, ss.885-891, 2021 (Hakemli Dergi)

MOBİLYA ENDÜSTRİSİ ÜRETİM SÜREÇLERİNDETEKNOLOJİ SEÇİMİ: Panel Ebatlama Makinesi SeçimiÖrneklemesi

Yılmaz K., Öztürk Y., Burdurlu E.

İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.774-785, 2017 (Hakemli Dergi)

ÇOK ÖLÇÜTLÜ KARAR VERME YAKLAŞIMI İLE MOBİLYA İŞLETMELERİ İÇİN HEDEF PAZAR SEÇİMİ

Yılmaz K., Öztürk Y., Burdurlu E.

İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.744-766, 2017 (Hakemli Dergi)

VERİ MADENCİLİĞİ İLE TÜRKİYE MOBİLYA SEKTORÜ İÇİN 2023 ÖNGÖRÜLERİ

Öztürk Y., Yılmaz K., Burdurlu E.

İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.757-763, 2017 (Hakemli Dergi)

Veri Madenciliği İle Türkiye Mobilya Sektörü İçin 2023 Öngörüleri

ÖZTÜRK Y., YILMAZ K., BURDURLU E.

İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.757-763, 2017 (Hakemli Dergi)

The color preferences of consumers on furniture surfaces

CİRİTCİOĞLU H. H., İLÇE A. C., BURDURLU E.

The Online Journal of Science and Technology , cilt.7, sa.3, ss.98-108, 2017 (Hakemli Dergi)

Farklı ağaç malzemelerde çekme yönü ve tutkal çeşidinin kavela çekme direncine etkilerinin belirlenmesi

ÇAĞATAY K., EFE H. H., BURDURLU E., KESİK H. İ.

KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY , cilt.13, sa.2, ss.182-191, 2013 (Hakemli Dergi)

Bazı Ağaç Malzemelerin Vida Tutma Mukavemetlerinin Belirlenmesi

ÇAĞATAY K., EFE H. H., BURDURLU E., KESİK H. İ.

Kastamonu Üniversitesi Orman Fakültesi Dergisi , cilt.12, sa.2, ss.321-328, 2012 (Hakemli Dergi)

Effect of layer arrangement on expansion bending strength and modulus of elasticity of solid wood veneer lumber from pine and poplar

KILIÇ Y., BURDURLU E., ELİBOL G. C.

GU Journal of Science , cilt.23, sa.1, ss.89-95, 2010 (Hakemli Dergi)

THE FIGURE PREFERENCES OF THE CONSUMERS ON THE PANEL FURNITURESURFACES

İLÇE A. C., Ciritçioğlu H. H., BURDURLU E., ALTUN S.

Technology , cilt.13, sa.4, ss.219-228, 2010 (Hakemli Dergi)

Tüketicilerin Kullandıkları Döşemeli Mobilyalar ile ilgili Şikayetlerin Belirlenmesi

ARSLAN A. R., SÖNMEZ A., BURDURLU E.

POLİTEKNİK DERGİSİ , cilt.13, sa.4, ss.295-304, 2010 (Hakemli Dergi)

Markalı Mobilya Tercihi Üzerine Kullanıcı Karakteristikleri ile Sosyo Ekonomik Özellikleri

ARSLAN A. R., DORUK Ş., BURDURLU E.

Politeknik Dergisi , cilt.12, sa.2, ss.25-34, 2009 (Hakemli Dergi) Sürdürülebilir Kalkınma

Okul Öncesi Çocuk Oyuncaklarında Malzeme Kullanımı ve 4 6 Yaş Çocuklarının Renk Tercihleri

ELİBOL G. C., KILIÇ Y., BURDURLU E.

Aile ve Toplum , sa.9, ss.35-43, 2006 (Hakemli Dergi)

The Effect of the Number of Blades and the Grain Size of Abrasivesin Planing and Sanding on the Surface Roughness of EuropeanBlack Pine and Lombardy Poplar

BURDURLU E., ULUPINAR ÖZ M., Bora A., Tahsin Çağrı E.

Turkish Journal of Agriculture and Foretry , cilt.29, sa.4, ss.315-322, 2005 (Hakemli Dergi)

LOCATION CHOICE FOR FURNITURE INDUSTRY FIRMS BY USING ANALYTIC HIERARCHY PROCESS AHP METHOD

BURDURLU E., Engin E.

Gazi University Journal , cilt.16, sa.2, ss.369-373, 2003 (Hakemli Dergi)

AYAK KAYIT BİRLEŞTİRMELERDE KÖŞE TAKOZU VE BİRLEŞTİRME TİPİNİN EĞİLME DİRENCİNE ETKİLERİ

BURDURLU E., KILIÇ M., ALTUN S.

GÜ Fen Bilimleri Dergisi , cilt.16, sa.2, ss.357-367, 2003 (Hakemli Dergi)

STATIC ANTHROPOMETRIC CHARACTERISTICS OF 12 15 AGED STUDENTS LIVING IN ANKARA TURKEY

BURDURLU E., USTA İ., İLÇE A. C., ALTUN S., ELİBOL G. C.

HÜ Sosyolojik Araştırmalar e Dergi , cilt.13, ss.1-14, 2003 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

KULLANICI AÇISINDAN KESONUN TASARIM ERGONOMİSİNİN CATIA PROGRAMINDA RULA YÖNTEMİ İLE İNCELENMESİ

ÖZTÜRK V., ÖZTÜRK Y., İMİRZİ H. Ö., BURDURLU E.

28. ulusal ergonomi kongresi. https://28uek.org/, Eskişehir, Türkiye, 14 - 16 Ekim 2022

Material Requirements Planning and ABC Analysis Applications in Furniture Industry…

BURDURLU E., SU M. E.

The XXIXTH International ConferenceResearch for Furniture Industry, 19 - 20 Ekim 2019

Legal Requirements for Occupational Safety in the Wood-Based Products Industry and Analysis of Current Situation

Yılmaz K., Burdurlu E.

The XXIXth International Conference Research for Furniture Industry, Ankara, Türkiye, 19 - 20 Eylül 2019, ss.249-278

Literature Review on Development of Integrated Decision Support Systems and Latest Applications

Yılmaz K., Burdurlu E.

The XXIXth International Conference Research for Furniture Industry, Ankara, Türkiye, 19 - 20 Eylül 2019, ss.367-396

EFFECTS OF DENSIFICATION ON THE ROUGHNESS AND HARDNESS OF BALSAWOOD

ÖZTÜRK Y., BURDURLU E.

The XXIXTH International ConferenceResearch for Furniture Industry, 19 - 20 Eylül 2019

An Application on the Assignment of the Most Proper Worker with the Hungarian Algorithm in the Furniture Manufacturing Processes

Yılmaz K., Su M. E., Burdurlu E.

International Forest Products Congress - ORENKO 2018, Trabzon, Türkiye, 26 - 29 Eylül 2018, ss.439-447

APPLICATION OF ABC ANALYSIS IN A LARGE-SCALE FURNITURE FACTORY

SU M. E., BURDURLU E.

International Forest Products Congress (ORENKO 2018), Trabzon, Türkiye, 26 - 29 Ekim 2018, ss.439-447

Target Market Selection for Furniture Companies with the Multiple Criteria Decision Making Approach

Yılmaz K., Öztürk Y., Burdurlu E.

4th International Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Ekim 2017, ss.137-149

2023 Forecast for the Furniture Sector of Turkey with Data Mining

Öztürk Y., Yılmaz K., Burdurlu E.

4th International Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Ekim 2017, ss.150-157

Technology Selection in Furniture Manufacturing Processes: Sampling of Panel Sizing Machine Selection

Yılmaz K., Öztürk Y., Burdurlu E.

4th International Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Ekim 2017, ss.168-180

Ağaç Malzemenin Rendelenmesinde Bazı Malzeme Özelliklerinin Gürültü Emisyonuna Etkileri

BURDURLU E., ŞENER A. İ.

1st International mediterranean Science and Engineering Congress, Adana, Türkiye, 26 Ekim 2017 - 28 Ekim 2016, ss.917-924

Effect of Densification Temperature with Different Cutting Angles on the Surface Roughnes of densified Scots Pine

ÜLKER O., BURDURLU E.

Yhe XXVIIth International Conference Research For Furniture Industry, 17 - 18 Eylül 2015, ss.186-196

Determining the Surface Hardness of Some Densified and Heat Treated Woods After Water Based Varnishing

PELİT H., SÖNMEZ A., BURDURLU E., USTA İ.

XXVII International Conference-Researh for Furniture Industry, Ankara, Türkiye, 17 - 18 Eylül 2015, ss.554-563

Selection of the Most Suitable Edge Banding Machine With the Financial analysis Techniques

CİRİTCİOĞLU H. H., BURDURLU E., AKBULUT R.

The XXVIIth International Conference Research For Furniture Industry, 17 - 18 Eylül 2015, ss.1-7

Determining the Surface Hardness of Densified and Heat Treatesd woods after water based varnishing

PELİT H., SÖNMEZ A., BURDURLU E., USTA İ.

XXVIIth International Conference Research For Furniture Industry, 17 - 18 Eylül 2015, ss.554-563

Metrikler

Yayın

Atıf (WoS)

419

H-İndeks (WoS)

Atıf (Scopus)

448

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Kitap & Kitap Bölümleri

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Tez Danışmanlığı

Açık Erişim