Yayınlar & Eserler

Yayın Ağı
Makaleler 33
Tümü (33)
SCI-E, SSCI, AHCI (19)
SCI-E, SSCI, AHCI, ESCI (21)
ESCI (2)
Scopus (22)
TRDizin (14)
Diğer Yayınlar (1)

1. ANN vs. MARS modeling: Experimental performance enhancement of MgO-TiO2/water binary and TiO2/water mono nanofluids in a plate-fin heat exchanger

Elibol E. A., Gönülaçar Y. E., Aktaş F., Tigli B.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , cilt.117, 2026 (SCI-Expanded) identifier identifier

2. A Numerical Investigation Into the Effects of Equivalence Ratio and Exhaust Gas Recirculation on Performance and Operating Range in High Compression HCCI Engines

Kethüdaoğlu G., Aktaş F., Taştan A., Karaaslan S., Dinler N., Polat S.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER , cilt.148, sa.1, ss.1-13, 2026 (SCI-Expanded, Scopus)

3. Impact of spark ignition timing and colorless distributed combustion on combustion and emissions of a natural gas-fueled heavy-duty converted engine

Aktaş F., Kethudaoglu G., Korkmaz Y., Karyeyen S.
Applied Thermal Engineering , cilt.279, 2025 (SCI-Expanded, Scopus) identifier

4. 0/1 Dimensional Simulation of Combustion Timing Effects on Performance and Emissions in a Methane-Hydrogen Fueled Engine

AKTAŞ F., Korkmaz Y., KETHÜDAOĞLU G.
International Journal of Automotive Science and Technology , cilt.9, sa.1, ss.114-120, 2025 (Hakemli Dergi)

5. Numerical investigation of in-cylinder swirl motion under cold start conditions in a diesel engine

AKTAŞ F., AYTAÇ YILMAZ Z., YÜCEL N.
International journal of energy studies (Online) , cilt.10, sa.1, ss.1185-1202, 2025 (Hakemli Dergi)

6. Experimental investigation of the thermal and hydrodynamic performances of plate-fin heat exchangers (PFHE) using MgO-water nanofluid as an enhanced coolant

AKTAŞ F., Elibol E. A., Aksoy A. E., Cicek D. D., Oztemel M. A., ÇETİN D., et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , cilt.150, sa.5, ss.3821-3834, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier

7. Impact of mesh size, time step, turbulence, and species parameters on diesel combustion simulation accuracy: A sector model perspective

AKTAŞ F., Kethudaoglu G., Yucel N.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2025 (SCI-Expanded, Scopus) identifier identifier

8. Thermal performance evaluation of Al2O3–water nanofluids in automotive radiators using ANN and PINN approaches

AKTAŞ F., Elibol E. A., Ulucak O., AKSOY E., Karabulut N., Cakmak E., et al.
Journal of Thermal Analysis and Calorimetry , 2025 (SCI-Expanded) identifier identifier

9. Thermal analysis of a refrigeration system integrated with a thermoelectric couple and microchannels using TiO2-water nanofluid

Elibol E. A., YILMAZOĞLU M. Z., AKSOY E., AKTAŞ F.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , cilt.108, 2024 (SCI-Expanded, Scopus) identifier identifier

10. Effect of using a ZnO-TiO2/water hybrid nanofluid on heat transfer performance and pressure drop in a flat tube with louvered finned heat exchanger

Elibol E. A., GÖNÜLAÇAR Y. E., AKTAŞ F., Tigli B.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , cilt.149, sa.15, ss.8665-8680, 2024 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

11. Role of spent FCC catalyst in pyrolysis and CO2-assisted gasification of pinewood

AKTAŞ F., Mavukwana A., Burra K. R. G., Gupta A. K.
APPLIED ENERGY , cilt.366, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

12. 0/1 and 3- dimensional cold flow analysis of a diesel engine: A case study

Kethudaoglu G., Aktaş F., Karaaslan S., Dinler N.
International Journal of Automotive Science and Technology , cilt.8, sa.1, ss.142-149, 2024 (Scopus, TRDizin) Creative Commons License identifier

13. Numerical investigation of the effect of swirl number on performance, combustion, and emissions characteristics in a converted heavy-duty natural gas engine

AKTAŞ F.
PROGRESS IN COMPUTATIONAL FLUID DYNAMICS , cilt.24, sa.3, ss.162-173, 2024 (SCI-Expanded, Scopus) identifier identifier

14. Effect of Spent Fluid Catalytic Cracking Catalysts on Syngas Yield during CO2-Assisted Gasification of Solid Waste

Mavukwana A., AKTAŞ F., Burra K. G., Sempuga C., Gupta A. K.
Chemical Engineering Transactions , cilt.111, ss.673-678, 2024 (Scopus) identifier

15. Investigation of the effects of propane usage at different ratios and start of combustion time on performance, emission, and in-cylinder combustion characteristics in converting a diesel engine to a reactivity-controlled compression ignition

Aktaş F., Yücel N.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.39, sa.2, ss.785-796, 2024 (SCI-Expanded) Creative Commons License identifier identifier identifier

16. Investigation of the Effect of TiO2 Nanoparticles on Engine Performance and Emission Characteristics in Diesel Engines

Koca S., Zincirci O., AKTAŞ F.
International Journal of Automotive Science and Technology , cilt.8, sa.2, ss.242-251, 2024 (Scopus) Creative Commons License identifier

17. Aerodynamic analysis of car rear spoiler with computational fluid dynamics for different angles and profiles

Özetemel M. A., AKTAŞ F., YÜCEL N.
International journal of energy studies (Online) , cilt.8, sa.4, ss.649-665, 2023 (Hakemli Dergi) identifier

18. Investigation of conversion of a diesel engine to homogeneous charge compression ignition engine using n-heptane: A zero-dimensional modeling

KETHUDAOGLU G., Aktaş F., KARAASLAN S., Polat S., DINLER N.
International journal of energy studies (Online) , cilt.8, sa.3, ss.535-556, 2023 (TRDizin) Creative Commons License identifier

19. Experimental investigation on heat transfer and flow characteristics of TiO2-water nanofluid in a heavy vehicle radiator

Elibol E. A., TURGUT O., AKTAŞ F., Senol H., ÇELİK A.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , cilt.148, sa.3, ss.977-994, 2023 (SCI-Expanded, Scopus) identifier identifier

20. Numerical Investigation of the Effects of Engine Speed on Performance and Combustion Characteristics on a Converted Spark-Ignition Natural Gas Engine

Aktaş F.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.10, sa.3, ss.613-626, 2022 (Hakemli Dergi) Creative Commons License

21. Numerical Investigation of Equivalence Ratio Effects on a Converted Diesel Engine Using Natural Gas

Aktas F.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY, TRANSACTIONS OF THE ASME , cilt.144, sa.9, ss.1-9, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

22. Spark ignition timing effects on a converted diesel engine using natural gas: A numerical study

AKTAŞ F.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.236, sa.9, ss.1949-1963, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

23. Colorless distributed combustion (CDC) effects on a converted spark-ignition natural gas engine

AKTAŞ F., KARYEYEN S.
Fuel , cilt.317, 2022 (SCI-Expanded, Scopus) identifier identifier

24. Performance and emission prediction of hydrogen addition to natural gas powered engine using 0/1 dimensional thermodynamic simulation

Aktaş F.
INTERNATIONAL JOURNAL OF ENERGY STUDIES , cilt.7, sa.1, ss.67-81, 2022 (Hakemli Dergi) Creative Commons License

25. A 0/1-Dimensional Numerical Analysis of Performance and Emission Characteristics of the Conversion of Heavy-Duty Diesel Engine to Spark-Ignition Natural Gas En-gine

Aktaş F.
International Journal of Automotive Science and Technology , cilt.6, sa.1, ss.1-8, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma identifier

26. Three-Dimensional Computational Fluid Dynamics Simulation and Mesh Size Effect of the Conversion of a Heavy-Duty Diesel Engine to Spark-Ignition Natural Gas Engine

Aktaş F.
Journal Of Engineering For Gas Turbines And Power-Transactions Of The Asme , cilt.144, sa.6, ss.1-12, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

27. Experimental investigation of cold start emission using preheating system on the exhaust line at the idle conditions on a spark ignition engine

AKTAŞ F., DİNLER N., KARAASLAN S., Turker A., YÜCEL N.
Sadhana - Academy Proceedings in Engineering Sciences , cilt.46, sa.3, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

28. EFFECTS OF PREHEATER LOAD AND LOCATION ON THE CATALYTIC CONVERTER EFFICIENCY DURING COLD START AND IDLING CONDITIONS

DİNLER N., Taskin S., AKTAŞ F., KARAASLAN S., YÜCEL N.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.41, sa.2, ss.239-247, 2021 (SCI-Expanded, Scopus, TRDizin) Creative Commons License identifier identifier identifier

29. Utilization of CFD for the Aerodynamic Analysis of a Subsonic Rocket

Aytac Z., Aktaş F.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.3, ss.879-887, 2020 (ESCI, TRDizin) Creative Commons License identifier

30. Numerical Investigation of the Effects of Different Percentage Ethanol and Methanol Addition on Performance and Emission Values of a Four Cylinder Diesel Engine at Full Load

AKTAŞ F., KARAASLAN S., Kilic M., YÜCEL N.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.22, sa.4, ss.967-977, 2019 (ESCI, TRDizin) Creative Commons License identifier

31. Effects of channel design and temperature on the performance of the catalytic converter

DİNLER N., AKTAŞ F., YÜCEL N.
INTERNATIONAL JOURNAL OF GREEN ENERGY , cilt.15, sa.13, ss.813-820, 2018 (SCI-Expanded, Scopus) identifier identifier

32. Soğuk Çalışma Durumunda Katalitik Konvertörün Tek Boyutlu Modellenmesi

Dinler N., Aktaş F., Bozkurt D., Karaaslan S., Yücel N.
Gazi Mühendislik Bilimleri Dergisi , cilt.4, sa.2, ss.108-114, 2018 (TRDizin) Creative Commons License Sürdürülebilir Kalkınma

33. Effects of Inlet Temperature and Channel Geometry on the Efficiency of a Catalytic Converter

Dinler N., Aktaş F., Yücel N.
Journal of Architecture and Engineering , cilt.2, sa.1, 2014 (Hakemli Dergi) Creative Commons License
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 22

1. TEK SİLİNDİRLİ BİR DİZEL MOTORUN HCCI DÖNÜŞÜMÜ VE ÖN TESTLERİ

KARAASLAN S., DİNLER N., AKTAŞ F., KETHÜDAOĞLU G., TAŞTAN A., POLAT S.
ULIBTK’25 Uluslararası Katılımlı 25. Isı Bilimi ve Tekniği Kongresi, 10 - 12 Eylül 2025, (Tam Metin Bildiri)

2. 0/1 BOYUTLU DİZEL-METAN YAKITLI RCCI MOTORUNUN SİMÜLASYONU VE MOTOR VE EMİSYON PERFORMANSININ DEĞERLENDİRİLMESİ

KORKMAZ Y., KETHÜDAOĞLU G., AKTAŞ F.
5TH INTERNATIONAL CONFERENCE ON FRONTIERS IN ACADEMIC RESEARCH ICFAR 2025, Konya, Türkiye, 25 - 26 Eylül 2025, (Tam Metin Bildiri)

3. Investigation of Composite Radome Repair Methods: An Experimental Study on Structural and Electromagnetic Performance

KARADUMAN M. E., TÜZEMEN M. Ç., AKTAŞ F.
4TH INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATIVE STUDIES ICSIS 2025 APRIL 29-30, 2025, Konya, Türkiye, 29 - 30 Nisan 2025, (Tam Metin Bildiri)

4. KH-47M2 Kinzhal Hipersonik Füzesi Burun Açısı Değişiminin Hesaplamalı Akışkanlar Dinamiği Yardımıyla İncelenmesi

KIRKPINAR H. A., AKTAŞ F.
3rd International Conference on Trends in Advanced Research, Konya, Türkiye, 4 - 05 Nisan 2025, (Tam Metin Bildiri)

5. M107 Obüs Mermisinin Hesaplamalı Akışkanlar Dinamiği Yardımıyla Analizi

AYDIN B., Çiçek D. D., AYTAÇ YILMAZ Z., AKTAŞ F.
3RD INTERNATIONAL CONFERENCE ON TRENDS IN ADVANCED RESEARCH ICTAR 2025, Konya, Türkiye, 04 Nisan 2025, (Tam Metin Bildiri)

6. TEMPERATURE AND POSITIONING EFFECTS OF SPENT FLUID CATALYTIC CRACKING CATALYST IN THE REACTOR ON PYROLYSIS OF POLYETHYLENE TEREPHTHALATE

Aktaş F., Burra K. G., Mavukwana A., Gupta A. K.
ASME 2024 Power Conference, Washington, Amerika Birleşik Devletleri, 15 - 18 Eylül 2024, ss.1-11, (Tam Metin Bildiri)

7. POLYETHYLENE TEREPHTHALATE GASIFICATION USING CO2: IMPACT OF SFCC CATALYST CONTACT MODE AND AMOUNT

Aktaş F., Burra K. G., Gupta A. K.
ASME 2024 Power Conference, Washington, Amerika Birleşik Devletleri, 15 - 18 Eylül 2024, ss.1-6, (Tam Metin Bildiri)

8. Effect of spent FCC catalyst during pyrolysis of Poly Ethylene Terephthalate

Aktas F., Burra K. R. G., Gupta A. K.
AIAA SCITECH 2024 Forum, Florida, Amerika Birleşik Devletleri, 8 Ocak - 12 Şubat 2024, ss.1-8, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier

9. Effect of Spent FCC Catalyst During Pyrolysis and CO2-Assisted Gasification of Polyethylene Terephthalate

Mavukwana A., Aktaş F., Kiran B. G., Celestin S., Gupta A. K.
47th International Technical Conference on Clean Energy, Florida, Amerika Birleşik Devletleri, 26 - 27 Temmuz 2023, (Yayınlanmadı)

10. Effect of Spent FCC Catalyst on CO2-Assisted Gasification of Pinewood

Mavukwana A., Aktaş F., Burra K. G., Sempuga C., Gupta A. K.
47th International Technical Conference on Clean Energy, Florida, Amerika Birleşik Devletleri, 23 - 27 Temmuz 2023, (Yayınlanmadı)

11. 0/1 DIMENSIONAL ANALYSIS OF THE COMBUSTION MODEL EFFECT ON AN INTERNAL COMBUSTION ENGINE USING NATURAL GAS

Aktaş F.
6th INTERNATIONAL CONGRESS ON APPLIED SCIENCES, Edirne, Türkiye, 6 - 08 Mayıs 2022, ss.25-26, (Özet Bildiri)

12. DOĞALGAZLI BUJİ ATEŞLEMELİ BİR MOTORA DÖNÜŞTÜRÜLMÜŞ DİZEL BİR MOTORDA SIKIŞTIRMA ORANI ETKİSİNİN İNCELENMESİ

Aktaş F.
ULUSLARARASI KATILIMLI 23.ISI BİLİMİ VE TEKNİĞİ KONGRESİ, Gaziantep, Türkiye, 8 - 10 Eylül 2021, ss.1554-1558, (Tam Metin Bildiri)

13. INVESTIGATION OF THE EFFECT OF USING PROPANE-DIESEL DUAL FUEL IN DIESEL ENGINE ON PERFORMANCE AND EMISSION VALUE

Aktaş F., Yücel N.
ULUSLARARASI KATILIMLI 23.ISI BİLİMİ VE TEKNİĞİ KONGRESİ, Gaziantep, Türkiye, 8 - 10 Eylül 2021, ss.554-558, (Tam Metin Bildiri)

14. NUMERICAL INVESTIGATION OF THE EFFECT OF THE AIR/FUEL RATIO IN A NATURAL GAS POWERED CONVERTED COMPRESSION IGNITION ENGINE

Aktaş F.
OTEKON 2020, Bursa, Türkiye, 6 - 07 Eylül 2021, ss.1065-1073, (Tam Metin Bildiri) Creative Commons License Sürdürülebilir Kalkınma

15. A Sustainable Building Design in Turkey

Sökmener A. B., Yılmaz A., TURGUT O., AKTAŞ F., Yıldız F. H., Altuntaş B., et al.
4th International Conference on Innovations and Emerging Trends in Mechanical Engineering, Ankara, Türkiye, 26 - 27 Mart 2019, (Tam Metin Bildiri)

16. The effect of the number of turbine blade on Gorlov turbine performance

Yılmaz A., Bozer O., Kırkpınar H. A., AKTAŞ F., TURGUT O.
4th International Conference on Innovations and Emerging Trends in Mechanical Engineering, (IIETME-2019), 27 - 28 Mart 2019, (Tam Metin Bildiri)

17. Experimental investigation of the effects of sunflower and hazelnut oil usage on performance and emission values in a diesel engine

Aslan G., AKTAŞ F., KARAASLAN S., DİNLER N., YÜCEL N.
7th European Conference on Renewable Energy Systems (ECRES 2019), 10 - 12 Haziran 2019, (Tam Metin Bildiri)

18. Investigation of the Effects of the Use of Diesel-Ethanol Fuel Mixture as a Secondary Fuel on the Performance and Emission Values of a Dual-Fuel Compressed-Ignition Engine

AKTAŞ F., KARAASLAN S., YÜCEL N.
7th European Conference on Renewable Energy Systems (ECRES 2019), 10 - 12 Haziran 2019, (Tam Metin Bildiri)

19. Numerical Simulation of Heat Exchanger for Jatropha Oil Biodiesel Fuel Preheating

AKTAŞ F., KARAASLAN S., YÜCEL N.
4th International Conference on Engineering and Natural Sciences (ICENS 2018), 2 - 06 Mayıs 2018, (Tam Metin Bildiri)

20. INFLUENCE OF ETHANOL AND METHANOL ADDITIVES ON A DIESEL ENGINE PERFORMANCE CHARACTERISTICS: 1-D MODELLING

Kılıç M., AKTAŞ F., KARAASLAN S., YÜCEL N.
4th International Conference on Engineering and Natural Sciences (ICENS 2018), 2 - 06 Mayıs 2018, (Tam Metin Bildiri)

21. ÜÇ YOLLU KATALİTİK KONVERTÖR GİRİŞ ÇIKIŞ AÇILARI ETKİLERİNİN SAYISAL OLARAK İNCELENMESİ

AKTAŞ F., YARAR A., DİNLER N., YÜCEL N.
Ulusal Isı Bilimi ve Tekniği Kongresi, Ankara, Türkiye, 13 - 16 Eylül 2017, (Tam Metin Bildiri)

22. Katalitik Konvertör Modellemesinde Kullanılan Reaksiyon Modellerinin Etkilerinin Sayısal İncelenmesi

DİNLER N., AKTAŞ F., YÜCEL N.
OTEKON’14 7. Otomotiv Teknolojileri Kongresi, Türkiye, 26 - 27 Mayıs 2014, (Tam Metin Bildiri)
Metrikler

Yayın

55

Yayın (WoS)

21

Yayın (Scopus)

23

Atıf (WoS)

116

H-İndeks (WoS)

8

Atıf (Scopus)

117

H-İndeks (Scopus)

8

Atıf (Scholar)

264

H-İndeks (Scholar)

12

Atıf (TrDizin)

10

H-İndeks (TrDizin)

2

Atıf (Sobiad)

30

H-İndeks (Sobiad)

3

Proje

9

Tez Danışmanlığı

4

Açık Erişim

14
BM Sürdürülebilir Kalkınma Amaçları