Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

A Theoretical and Experimental Investigation of Ti Alloy Powder Production Using Low-Power Plasma Torches

Transactions Of Nonferrous Metals Society Of China, vol.2021, pp.112-118, 2021 (Journal Indexed in SCI Expanded)

Numerical modeling of torch design for plasma atomization

Acta Physica Polonica A, vol.134, pp.292-296, 2018 (Journal Indexed in SCI Expanded) identifier identifier

Determination of metal powder particle size by numerical modeling in gas atomization

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.33, pp.1135-1144, 2018 (Journal Indexed in SCI) Creative Commons License identifier identifier

Investigation of the effect of gas flow rate and electric current on plasma jet temperature and velocity at torch exit by CFD analysis

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.33, pp.361-369, 2018 (Journal Indexed in SCI) Creative Commons License identifier identifier

Investigation of corrosion behaviour of porous powder metallurgy parts electrochemically coated with diamond nano particles modified chromium

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.31, no.3, pp.580-589, 2016 (Journal Indexed in SCI) Creative Commons License identifier identifier

Experimental and first-principles investigation of crystal structure of powder metallurgy Al-1.1Sc and Al-2Sc alloys

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, vol.23, no.10, pp.3020-3026, 2013 (Journal Indexed in SCI) identifier identifier

Improvements to close coupled gas atomisation nozzle for fine powder production

POWDER METALLURGY, vol.50, no.1, pp.66-71, 2007 (Journal Indexed in SCI) identifier identifier

Production of high strength Al-Mg-Sc alloys by PM

Powder Metallurgy, vol.41, no.2, pp.119-122, 1998 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

3D Cfd Modelling of Non-transferred Argon Plasma Torch

Materials Today Proceedings, vol.32, pp.12-17, 2020 (Refereed Journals of Other Institutions)

Effect of Powder Production Processes on Lubricated Bearings

Dicle Üniversitesi Mühendislik Fakültesi, vol.11, no.2, pp.647-652, 2020 (National Refreed University Journal)

Analytical Investigation of Maximum Stresses According to the (hkl) Layers at Stable Condition for Al-Sc Alloys

El-Cezerî Journal of Science and Engineering, vol.6, pp.200-207, 2019 (Refereed Journals of Other Institutions) Creative Commons License

Electrolyte Coatings od Chromium With Nano-diamonds on Sintered Steels

Transactions o Foundry Research Institute, vol.57, no.4, pp.333-336, 2017 (Refereed Journals of Other Institutions)

Optimizing the Processing Parameters for Al-20Si- 6Cu Aluminum-Silicon P/M Alloy

International Journal of Engineering Research in Mechanical and Civil Engineering, vol.2, no.7, pp.18-22, 2017 (Refereed Journals of Other Institutions)

Effect of Nanodiamonds Modification of Chromium Coating on Sintered Ferrous Materials

Journal of Materials Science and Technology, vol.25, no.2, pp.80-85, 2017 (Refereed Journals of Other Institutions)

Laval Tipi Yeni bir Nozul Tasarımı ile Metal Tozu Üretimi ve Üretim Değişkenlerinin Etkisinin İncelenmesi

Makine Teknolojileri Dergisi, vol.1, pp.69-76, 2007 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

Al-1,1Sc Alaşımının Bazı Termal Özelliklerinin Deneysel Yöntemle İncelenmesi

Internatıonal Black Sea Coastlıne Countrıes Symposıum – II, 20 - 22 June 2019

Al-6Mg-1,1Sc ALAŞIMININ BAZI TERMAL ÖZELLİKLERİNİN DENEYSEL YÖNTEMLE İNCELENMESİ

INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SYMPOSIUM-II, Samsun, Turkey, 20 - 22 July 2019, pp.244-250

Al-1,1Sc ALAŞIMININ BAZI TERMAL ÖZELLİKLERİNİN DENEYSEL YÖNTEMLE İNCELENMESİ

INTERNATIONAL BLACK SEA COASTLINE COUNTRIES SYMPOSIUM-II, Samsun, Turkey, 20 - 22 July 2019, pp.237-243

Analytical Investigation of Maximum Stresses According to the (hkl) Layers at Stable Condition for Al-Sc Alloys

1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018, vol.6, pp.200-207

Hücresel yapılı tasarımlarda boşluk değerinin belirlenmesine yönelik matematiksel yaklaşım

3rd International Congress on 3D printing (Additional Manufacturing) Technologies and Digital Industries, Antalya, Turkey, 19 - 21 April 2018, pp.660-668

Hücresel Yapılı Tasarımlarda Hacimsel Boşluk Değerinin Belirlenmesine Yönelik Matematiksel Yaklaşım

3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018

Investigating The Corrosion Behavior of Electrodeposited Nickel-Nano Diamond Composite Coating On Porous Materials by The Cyclic Voltammetry Method

1st International Symposium on Multidisciplinary Studies and Innovative Technologies, Tokat, Turkey, 2 - 04 November 2017, pp.49-54

IMPROVEMENT OF PLASMA TORCH GEOMETRY BY CFD FORMETAL POWDER PRODUCTION

The Porous and Powder Materials Symposium and Exhibitions, 12 - 15 September 2017

Calculation of Plane Energies (HKL) for Fe and Fe - 25 Al by Analytical Method

3RD INTERNATIONAL TURKIC WORLD CONFERENCE ON CHEMICAL SCIENCES AND TECHNOLOGIES, 3RD ITWCCST, 10 - 13 September 2017

Optimizing the Processing Parameters for Al-20Si-6Cu Aluminum- Silicon P/M Alloy

stanbul 49th International Conference onEngineering Technology, Computer, Basic Applied Sciences (ECBA- 2017) August 3-4, 2017 Istanbul, Turkey, 3 - 04 August 2017, vol.2, pp.88-92

Synthesis, characterization and tribological studies of Chromium-Nano diamond composite coating

3rd Iron and Steel Symposium(UDCS’17), Karabük, Turkey, 3 April - 05 December 2017, pp.291-296

Numerical Modeling of Torch Design for Plasma Atomization

7th International Advances in Applied Physics and Materials Science Congress, 22 - 26 April 2017

3D CFD Modelling of Argon Non-Transferred Plasma Torch

7th International Advances in Applied Physics and Materials Science Congress, Aydın, Turkey, 22 - 26 April 2017

An Investigation on the Effect of Gas Atomisation Parameters on 7075 Aluminum Alloy PowderProduction

International Congress on Applied Science and Technology (ASTECH’xx2017), 17 - 20 April 2017, vol.1, pp.30

Production of Silver Alloy Powder to Manufacture Dental Amalgam

International Congress on Applied Science and Technology (ASTECH’xx2017), 17 - 20 April 2017, vol.1, pp.29

THEORETICAL CALCULATIONS OF MAXIMUM STRESS VALUES IN EQUILIBRIUM FOR BCC FE AND FCC AL WITH RESPECT TO DIFFERENT PLANES

The International Conference on Advances in Science and Arts (ICASA 2017), İstanbul, Turkey, 29 - 31 March 2017

3D Cfd modelling of non-transferred argon plasma torch

7th International Advances in Applied Physics and Materials Science Congress and Exhibition, APMAS 2017, Fethiye, Turkey, 22 - 26 April 2017, vol.32, pp.12-17 identifier

Calculation of Internal Interaction Energy of Fe(1-x) - Al(x) Alloy System by Analytical Method

2nd INTERNATIONAL CONGRESS ON THE WORLD OF TECHNOLOGY AND ADVANCED MATERIALS, 28 September - 02 October 2016

Estimation of optimum protrusion length by CFD modeling for the gas atomization nozzle

7th Internation Powder Metallurgy Congress & Exhibition, AANKARA, Turkey, 24 - 28 June 2014, pp.118-119

High efficient metal powder production by gas atomisation process

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, South Korea, 24 - 28 September 2006, pp.57-60 identifier

Effect of cobalt to bronze ratio on transverse rupture strength of diamond segments

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, South Korea, 24 - 28 September 2006, pp.1105-1108 identifier

Matrix composition effect on the wear behaviour of diamond segments

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, South Korea, 24 - 28 September 2006, pp.1113-1116 identifier identifier

Effect of cobalt to bronze ratio on transverse rupture strength of diamond segments

Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, South Korea, 24 - 28 September 2006, pp.1105-1108 identifier

Theoretical and experimental investigation of a supersonic nozzle design

European Powder Metallurgy Congress and Exhibition, Euro PM 2005, Prague, Czech Republic, 2 - 05 October 2005, vol.2, pp.47-52 identifier

Investigation of high efficient supersonic nozzle parameters for tin powder production by gas atomisation

European Powder Metallurgy Congress and Exhibition, Euro PM 2005, Prague, Czech Republic, 2 - 05 October 2005, vol.2, pp.23-29 identifier

The effect of the mixer type and ratio of reinforcement particle on the mechanical properties of NbC reinforced Al composite material produced via powder metallurgy

European Powder Metallurgy Congress and Exhibition, Euro PM 2005, Prague, Czech Republic, 2 - 05 October 2005, vol.2, pp.279-285 identifier

Books & Book Chapters

POWDER FORMING

in: Modern Manufacturing Processes, M KOÇ, TUGRUL ÖZEL, Editor, JOHN WILEY SONS, pp.65-87, 2019

Powder Production Methods

in: Powder Metallurgy and Particulate Materials Processing Technology, Süleyman SARITAŞ,Mehmet TÜRKER,Nuri DURLU, Editor, TTMD, Ankara, pp.59-97, 2007