Doç. Dr. TUNÇ APATAY

Yayın Ağı

Makaleler 15

1. Investigation of Static and Fatigue Characteristics of Thermoplastic CF-UD/PEKK Material for Rotorcraft Lug Parts

Çakıcı U., Ece R., Toros S., APATAY T., YILDIRIM B.

Strength of Materials , cilt.56, sa.2, ss.361-374, 2024 (SCI-Expanded)

2. Thermo-mechanically loaded steel/aluminum functionally graded spherical containers and pressure vessels

Arslan E., Mack W., Apatay T.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , cilt.191, 2021 (SCI-Expanded)

3. Effects of homogeneous and inhomogeneous heating on rotating shrink fits with annular inclusion and functionally graded hub

APATAY T., Arslan E., Mack W.

JOURNAL OF THERMAL STRESSES , cilt.42, sa.11, ss.1458-1479, 2019 (SCI-Expanded)

4. On the design of rotating elastic shrink fits with annular inclusion and functionally graded hub

APATAY T., Arslan E., Mack W.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.47, sa.3, ss.339-355, 2019 (SCI-Expanded)

5. Thermal loading and unloading of a solid cylinder subjected to periodic internal energy cycling

ERASLAN A. N., APATAY T.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.97, sa.3, ss.340-357, 2017 (SCI-Expanded)

6. Exact Solution to Elastic Behavior of Periodic Heat Generating Solid Cylinder

APATAY T.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.19, sa.4, ss.421-426, 2016 (ESCI)

7. Analytical solution to thermal loading and unloading of a cylinder subjected to periodic surface heating

ERASLAN A. N., APATAY T.

JOURNAL OF THERMAL STRESSES , cilt.39, sa.8, ss.928-941, 2016 (SCI-Expanded)

8. On the optimum design of rotating two-layered composite tubes subject to internal heating or pressure

APATAY T., Mack W.

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH , cilt.79, ss.109-122, 2015 (SCI-Expanded)

9. Thermoelastic Stresses In A Rod Subjected To Periodic Boundary Condition An Analytical Treatment

ERASLAN A. N., APATAY T.

Journal of Multidisciplinary Engineering Science and Technology , cilt.2, sa.9, ss.2438-2444, 2015 (Hakemli Dergi)

10. A surface crack in a graded coating subjected to sliding frictional contact

DAĞ S., APATAY T., GÜLER M. A., Gulgec M.

ENGINEERING FRACTURE MECHANICS , cilt.80, ss.72-91, 2012 (SCI-Expanded)

11. SUBSURFACE CONTACT STRESSES IN FUNCTIONALLY GRADED COATINGS LOADED BY A FRICTIONAL FLAT STAMP

APATAY T., DAĞ S., GÜLER M. A., Gulgec M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.25, sa.3, ss.611-623, 2010 (SCI-Expanded)

12. ELASTIC-PLASTIC STRESS ANALYSIS OF NONHOMOGENEOUS ROTATING SOLID DISCS

ERASLAN A. N., APATAY T., Gulgec M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.23, sa.3, ss.627-635, 2008 (SCI-Expanded)

13. Analytical solution of nonlinear strain hardening preheated pressure tube

ERASLAN A. N., APATAY T.

Turkish Journal of Engineering Environmental Sciences , cilt.32, sa.1, ss.41-50, 2008 (Hakemli Dergi)

14. On annular disks of variable thickness subjected to external pressure

Eraslan A., Apatay T.

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH , cilt.68, sa.3, ss.133-138, 2004 (SCI-Expanded)

15. Parabolik Kalınlıklı Dönen Disklerin Elastik Deformasyonu Analitik Çözümler

APATAY T., ERASLAN A. N.

Journal Of The Faculty Of Engineering And Architecture Of Gazi University , cilt.18, sa.2, ss.115-135, 2003 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. Effects of a temperature cycle on a rotating shrink fit with FGM‐hub

ARSLAN E., APATAY T., MACK W.

90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 18 - 22 Şubat 2019, cilt.19, (Tam Metin Bildiri)

2. Effects of wall thickness and material properties on the elastic limit behavior of a tube subject to periodic boundary conditions

APATAY T., ERASLAN A. N.

International Congress on Industrial and Applied Mathematics, Valensiya, İspanya, 15 - 19 Temmuz 2019, (Özet Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

184

Doç. Dr. TUNÇ APATAY

Yayınlar & Eserler

1. Investigation of Static and Fatigue Characteristics of Thermoplastic CF-UD/PEKK Material for Rotorcraft Lug Parts

2. Thermo-mechanically loaded steel/aluminum functionally graded spherical containers and pressure vessels

3. Effects of homogeneous and inhomogeneous heating on rotating shrink fits with annular inclusion and functionally graded hub

4. On the design of rotating elastic shrink fits with annular inclusion and functionally graded hub

5. Thermal loading and unloading of a solid cylinder subjected to periodic internal energy cycling

6. Exact Solution to Elastic Behavior of Periodic Heat Generating Solid Cylinder

7. Analytical solution to thermal loading and unloading of a cylinder subjected to periodic surface heating

8. On the optimum design of rotating two-layered composite tubes subject to internal heating or pressure

9. Thermoelastic Stresses In A Rod Subjected To Periodic Boundary Condition An Analytical Treatment

10. A surface crack in a graded coating subjected to sliding frictional contact

11. SUBSURFACE CONTACT STRESSES IN FUNCTIONALLY GRADED COATINGS LOADED BY A FRICTIONAL FLAT STAMP

12. ELASTIC-PLASTIC STRESS ANALYSIS OF NONHOMOGENEOUS ROTATING SOLID DISCS

13. Analytical solution of nonlinear strain hardening preheated pressure tube

14. On annular disks of variable thickness subjected to external pressure

15. Parabolik Kalınlıklı Dönen Disklerin Elastik Deformasyonu Analitik Çözümler

1. Effects of a temperature cycle on a rotating shrink fit with FGM‐hub

2. Effects of wall thickness and material properties on the elastic limit behavior of a tube subject to periodic boundary conditions

3. Thermally assembled shrink fit with annular inclusion and FGM-hub

4. İç Yüzey Sıcaklığı Periyodik Olarak Değişen Kalın Cidarlı Tüplerde Termoelastik Gerilme Davranışı: Analitik Çözüm

5. Thermally loaded elastic-plastic shrink fit with FGM-hub

6. Periyodik Olarak Sönümlenen İç Isı Üretimi Etkisindeki Silindirin Akma Davranışı

7. Dış Yüzey Sıcaklığı Zamanla Değişen Silindirin Elastik Plastik Analitik Çözümü

8. Sinüzoidal Değişen İç Isı Üretimi Etkisindeki Silindirin Kısmen Plastik Analitik Çözümü

9. Optimization of two layered steel aluminum hollow cylinders under combined load

10. Effect of thickness parameters on the yielding for rotating solid disks of variable thickness

11. Fonksiyonel Derecelendirilmiş İçi Dolu Dönen Bir Diskin Elastik Analitik Çözümü

12. İçi dolu değişken kalınlıklı dönen bir diskin elastoplastik analizi

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Tez Danışmanlığı

Açık Erişim