Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Sliding movement temperature analysis between composite conductor rail and a collector shoe

Erdogan S., Usta Y.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT , cilt.237, sa.4, ss.541-550, 2023 (SCI-Expanded) identifier identifier

Experimental and Numerical Investigation on Bending Behavior of Ti-6Al-4V Parts Produced by Additive Metal Laser Sintering

Yesilkaya K. K., USTA Y., AYCAN M. F., Demir T.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.1, ss.286-296, 2022 (SCI-Expanded) identifier identifier

Reproducibility of Replicated Trabecular Bone Structures from Ti6Al4V Extralow Interstitials Powder by Selective Laser Melting

Balci A., Kucukaltun F., AYCAN M. F., USTA Y., DEMİR T.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.46, sa.3, ss.2527-2541, 2021 (SCI-Expanded) identifier identifier

Establishment of an incentive system for press machine tools used in metal manufacturing industry for increasing the safety according to occupation safety

Pehlivan T., USTA Y.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.4, ss.1751-1765, 2020 (SCI-Expanded) Creative Commons License identifier identifier

EXPERIMENTAL INVESTIGATION EFFECTS OF PARAMETERS OF SPRAY FORMATION ON POROSITY AND HARDNESS

Hasak S. M. A., USTA Y.
ATOMIZATION AND SPRAYS , cilt.29, sa.9, ss.783-797, 2019 (SCI-Expanded) identifier identifier

Investigation of toggling effect on pullout performance of pedicle screws

AYCAN M. F., YAMAN M. E., USTA Y., DEMİR T., Tolunay T.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.232, sa.4, ss.395-402, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

Pullout performance comparison of novel expandable pedicle screw with expandable poly-ether-ether-ketone shells and cement-augmented pedicle screws

AYCAN M. F., Tolunay T., DEMİR T., YAMAN M. E., USTA Y.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.231, sa.2, ss.169-175, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

EDM Performance of B4C Cu Based Sintered Tool Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.
Journal of Materials Science and Technology , cilt.24, sa.1, ss.3-10, 2016 (SCI-Expanded)

Experimental and numerical investigations for mechanical and microstructural characterization of micro-manufactured AZ91D magnesium alloy disks for biomedical applications

Kayhan S. M., Tahmasebifar A., KOÇ M., USTA Y., TEZCANER A., EVİS Z.
MATERIALS & DESIGN , cilt.93, ss.397-408, 2016 (SCI-Expanded) identifier identifier

Performance and surface alloying characteristics of Cu-Cr and Cu-Mo powder metal tool electrodes in electrical discharge machining

Gulcan O., USLAN İ., USTA Y., ÇOĞUN C.
MACHINING SCIENCE AND TECHNOLOGY , cilt.20, sa.4, ss.523-546, 2016 (SCI-Expanded) identifier identifier

EFFECT OF USE OF Cu-Cr P/M ELECTRODES ON MACHINING PERFORMANCE OF ELECTRIC DISCHARGE MACHINING

Gulcan O., USLAN İ., USTA Y., ÇOĞUN C.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.30, sa.3, ss.381-394, 2015 (SCI-Expanded) identifier identifier

INVESTIGATIONS ON PRODUCTION PARAMETERS OF POROUS STAINLESS STEEL SURFACES USED ON FUEL CELLS

USTA Y., Koylu A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.27, sa.2, ss.265-274, 2012 (SCI-Expanded) identifier identifier

2-D and 3-D modulated porous coatings for enhanced pool boiling

Min D. H., Hwang G. S., USTA Y., Cora O. N., KOÇ M., Kaviany M.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.52, ss.2607-2613, 2009 (SCI-Expanded) identifier identifier

Micro-manufacturing of micro-scale porous surface structures for enhanced heat transfer applications: an experimental process optimization study

Cora O. N., USTA Y., KOÇ M.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING , cilt.19, sa.4, 2009 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Wedge cutting of mild steel by CO(2) laser and cut-quality assessment in relation to normal cutting

Yilbas B. S., Karatas C., Uslan İ., KELEŞ Ö., USTA Y., Yilbas Z., et al.
OPTICS AND LASERS IN ENGINEERING , cilt.46, sa.10, ss.777-784, 2008 (SCI-Expanded) identifier identifier

Investigations on thermo-mechanical fabrication of micro-scale porous surface features

KOÇ M., USTA Y., Karakoc A.
JOURNAL OF POWER SOURCES , cilt.179, sa.2, ss.592-602, 2008 (SCI-Expanded) identifier identifier

Laser cutting of Kevlar and mild steel composite structure: End product quality assessment

Al-Sulaiman F., Yilbas B. S., Karatas C., KELEŞ Ö., Uslan İ., USTA Y., et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.16, sa.1, ss.22-29, 2007 (SCI-Expanded) identifier identifier

Design and testing of a hydraulic position control system for profile turning on a conventional lathe Klasi̇k bi̇r torna tezgahi i̇çi̇n bi̇lgi̇sayar kontrollu profi̇l tornalama si̇stemi̇ geli̇şti̇ri̇lmesi̇

Keleş Ö., Usta Y., Yeşilbaǧ Y. Y., Ercan Y.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.21, ss.553-565, 2006 (SCI-Expanded) Creative Commons License identifier

Electrochemical properties of the laser nitrided surfaces of Ti-6Al-4V alloy

Yibas B. S., Khaled M., Karatas C., Uslan İ., KELEŞ Ö., USTA Y., et al.
Surface and Coatings Technology , cilt.201, sa.3-4, ss.679-685, 2006 (SCI-Expanded) identifier identifier

Laser cutting of steel sheets: Influence of workpiece thickness and beam waist position on kerf size and stria formation

Karatas C., KELEŞ Ö., Uslan İ., USTA Y.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.172, sa.1, ss.22-29, 2006 (SCI-Expanded) identifier identifier

Laser cutting of corners: Assessment of cutting quality

Yilbas B., Karatas C., KELEŞ Ö., Uslan İ., USTA Y., Ahsan M., et al.
LASERS IN ENGINEERING , cilt.16, ss.157-171, 2006 (SCI-Expanded) identifier identifier

Design and testing of a hydraulic position control system for oval turning on a conventional lathe Torna tezgahlarinda oval kesme yapacak hidrolik düzenek geliştirilmesi

USTA Y., KELEŞ Ö., Ercan Y.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.18, sa.3, ss.1-14, 2003 (SCI-Expanded) identifier
Diğer Dergilerde Yayınlanan Makaleler

Characterization of heating elements of different dimensions used in resistance welding of thermoplastic matrix composite materials

Öztürkmen H., USTA Y., TOROS S., ÖZTÜRK F.
Journal of innovative engineering and natural science (Online) , cilt.3, sa.2, ss.219-227, 2023 (Hakemli Dergi) Creative Commons License identifier

Compression and Compression-Shear Strength of Trabecular Metal Structures Produced from Ti6Al4V ELI Alloy by Selected Laser Melting

Balcı A., Aycan M. F., Usta Y., Demir T.
Journal of Polytechnic , cilt.24, sa.3, 2021 (ESCI) identifier identifier

Kazıcı Yükleyici Makineler için Kazıcı Kepçe ile Çalışan Hidrolik Bir Çene Tasarımı ve Denenmesi

Demir Y. Z., USTA Y.
Muş Alparslan Üniversitesi Fen Bilimleri Dergisi , cilt.7, sa.1, ss.621-634, 2019 (Hakemli Dergi)

THE IMPORTANCE OF DIGITAL RADIOGRAPHY IN METAL INJECTION MOLDING METHOD

URTEKİN L., USTA Y.
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.5, sa.2, ss.82-88, 2018 (Hakemli Dergi)

Investigation on Type of Wear on PVD Coated Inserts Used on Up and Down Milling

Attari S., USTA Y.
International Journal of Advances in Mechanical & Automobile Engineering (IJAMAE) , cilt.2, sa.1, ss.35-39, 2015 (Hakemli Dergi)

Klasik Bir Torna Tezgahı İçin Bilgisayar Kontrollu Profil Tornalama Tezgahı II

KELEŞ Ö., USTA Y., YEŞİLBAĞ Y., ERCAN Y.
Endüstri & Otomasyon , sa.108, ss.52-56, 2006 (Hakemli Dergi)

Klasik Bir Torna Tezgahı İçin Bilgisayar Kontrollu Profil Tornalama Tezgahı I

KELEŞ Ö., USTA Y., YEŞİLBAĞ Y., ERCAN Y.
Endüstri & Otomasyon , sa.107, ss.24-27, 2006 (Hakemli Dergi)

Klasik bir torna tezgahı için bilgisayar kontrollu profil tornalama sistemi geliştirilmesi

Keleş Ö., Usta Y., Yeşilbağ Y. Y., Ercan Y.
Gazi Üniversitesi Müh. Mim. Fak. Dergisi , cilt.21, sa.3, ss.553-565, 2006 (Hakemli Dergi) Creative Commons License

İmalat Hücresinde Kullanılan Bir Robotun İşlemlerinin Sıralanması

Usta Y., Ercan Y.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.21, sa.2, ss.373-386, 2006 (Scopus) Creative Commons License

Robotlu Bir İmalat Hücresindeki Taşıma İşlemleri İçin Modele Dayalı Bir Uzman Sistem Geliştirilmesi

USTA Y.
Journal Of The Faculty Of Engineering And Architecture Of Gazi University , cilt.20, sa.2, ss.275-288, 2005 (Scopus) identifier

Torna Tezgahlarında Oval Kesme Yapacak Hidrolik Düzenek Geliştirilmesi

USTA Y., KELEŞ Ö., ERCAN Y.
Gazi Üniversitesi Müh. Mim. Fak. Dergisi , cilt.18, sa.3, ss.1-14, 2003 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Effects of Powder Morphology on the Apparent Density and the Flow Rate of Metal Powders

USLAN İ., USTA Y., Sarıtaş S.
2006 POWDER METALLURGY World Congress, Busan, Güney Kore, 24 Eylül 2006, cilt.1, ss.1256

Termoplastik matrisli kompozit malzemelerin direnç kaynağı ile birleştirilmesinde kullanılan farklı boyutlardaki ısıtma elemanlarının karakterizasyonu

Öztürkmen H., USTA Y., TOROS S., ÖZTÜRK F.
12th International Fiber and Polymer Research Symposium, Yalova, Türkiye, 5 - 06 Mayıs 2023, cilt.1, ss.1-2

Maden Sanayisinde Kullanılan Hadfield Çeliğinin Aşınma Özelliklerinin Geliştirilmesi

Sertkaya M. A., USTA Y.
ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-VIII, Ankara, Türkiye, 09 Haziran 2023, cilt.1, ss.46-53

Eklemeli Üretim İçin Bir Uçak Yapısal Parçasının Topoloji Optimizasyonu

Oskay D., USTA Y.
9 INTERNATIONAL CONGRESS ON ENGINEERING AND TECHNOLOGY MANAGEMENT, İstanbul, Türkiye, 29 Nisan 2023, cilt.1, ss.196-203

Seçici Lazer Ergitme Metodu ile Alüminyumdan Mamul Parça Üretiminde En Küçük Unsur Geometrisinin Deneysel Olarak Belirlenmesi

Yurdakul B., USTA Y.
9 INTERNATIONAL CONGRESS ON ENGINEERING AND TECHNOLOGY MANAGEMENT, İstanbul, Türkiye, 29 Nisan 2023, cilt.1, ss.351-360

Pedikül Vida Türlerinin Suni Füzyon Sonrası ÇekipÇıkarma Dayanımlarının Karşılaştırmalı İncelenmesi

Aycan M. F., Usta Y., Tolunay T., Yaman M. E., Demir T.
Türk Nöroşirürji Derneği 31. Bilimsel Kongresi, Antalya, Türkiye, 29 Mart - 01 Nisan 2017, ss.107

PRODUCTION OF REPLICATED TRABECULAR BONE STRUCTURE BY SELECTIVE LASER MELTING METHOD USING TI6Al4V POWDER AND INVESTIGATION OF GEOMETRIC ACCURACY

Küçükaltun F., Balcı A., Aycan M. F., Usta Y., Demir T.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Skopje, Makedonya, 21 - 23 Haziran 2019, ss.375

Elektron Demeti ile Ergitme İşleminde Üretim Oryantasyonunun Mekanik Özelliklere Etkisinin Araştırılması

Şen B., USTA Y.
1. ULUSAL MÜHENDİSLİK VE TEKNOLOJİ KONGRESİ, Karaman, Türkiye, 17 - 19 Ekim 2019, ss.4

TRABEKÜLER KEMİK GÖZENEK YAPIYA SAHİP MALZEMELERİN SEÇİMLİ LAZER ERGİTME YÖNTEMİ İLE Tİ6Al4V TOZU KULLANILARAK ÜRETİMİ VE GEOMETRİK DOĞRULUĞUNUN ARAŞTIRILMASI

Küçükaltun F., BALCI A., Aycan F., USTA Y., DEMİR T.
The International Conference on Materials Science, Mechanical and Automotive Engineering and Technology (IMSMATEC 19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.533-538

TRABEKÜLER KEMİK YAPININ SEÇİMLİ LAZER ERGİTME METODU İLE Ti6Al4V MALZEMEDEN ÜRETİLEBİLİRLİĞİ

BALCI A., Küçükaltun F., Aycan F., USTA Y.
5.ULUSLARARASI SOSYAL BİLİMLER KONGRESİ (INCSOS 19), ÜSKÜP, Makedonya, 27 - 30 Haziran 2019, ss.255-262

INVESTIGATION OF OPEN POROUS ALUMINUM FOAM PRODUCTION BY POWDER METALLURGY FOR HEAT EXCHANGERS

USTA Y., BALCI A., Aslanpınar T., Apak A.
4th The International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2019), Muğla, Türkiye, 9 - 11 Ekim 2019, ss.205-208

THERMAL ANALYSIS OF A POROUS ALUMINUM STRUCTURE EMBEDDED ON A HEAT PIPE

Şahin G., Serkan T., Alper A., USTA Y.
4th International Porous and Powder Materials Symposium and Exhibition Symposium (PPM2019), Muğla, Türkiye, 9 - 11 Ekim 2019, ss.172-175

Trabeküler Kemik Yapının Seçimli Lazer Ergitme Metodu İle Tİ6AL4V Malzemeden Üretilebilirliği

BALCI A., Küçükaltun F., AYCAN M. F., USTA Y.
5. ULUSLARARASI BİLİŞİM TEKNOLOJİLERİ VE UYGULAMALI BİLİMLER SEMPOZYUMU, Makedonya, 27 Haziran 2019

Kemik İçindeki Gözenekli Yapının Üç Boyutlu Lazer Yazıcılar Kullanarak Ti6Al4V Malzemeden Üretilebilirliği

Balcı A., Küçükaltun F., Aycan M. F., Usta Y.
5. ULUSLARARASI SOSYAL BİLİMLER KONGRESİ, Nevşehir, Türkiye, 27 - 30 Haziran 2019, ss.523-528

THE EFFECTS OF BUILDING ANGLE ON THE 420J2 STAINLESS STEEL PARTS WITH USING DIRECT ENERGY DEPOSITION METHOD

Güner S., BALCI A., USTA Y.
THE INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE MECHANICAL AND AUTOMOTIVE ENGINEERINGS AND TECHNOLOGY (IMSMATEC’18), İzmir, Türkiye, 10 - 12 Nisan 2018, ss.197-200

Metal İmalat Sektöründe Kullanılan Preslerin İş Güvenliği Açısından Güvenli Hale Getirilmesi İçin Teşvik Sisteminin Kurulması

Pehlivan T., USTA Y.
9. Uluslararası İş Sağlığı ve Güvenliği Konferansı, İstanbul, Türkiye, 6 - 09 Mayıs 2018, cilt.1, ss.346-361

WEAR RESISTANCE OF COMPOSITE COATINGS OF CHROMIUM AND NANODIAMONDS ON SINTERED FERROUS MATERIALS

Gidikova N., Erdoğan A. K., USTA Y., Valov R., Petkov V.
NDT Days 2016, Sozopol, Bulgaristan, 6 - 11 Haziran 2016, cilt.1, ss.265-267

EDM Performance of B4C Cu Based Sintered Tool Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.
Materials Science, Hydro- and Aerodynamics and National Security ’2015, Sofya, Bulgaristan, 22 - 23 Ekim 2015

Investigation on Hardness Behavior of Porous Powder Metallurgy Parts Coated with Diamond Nanoparticles Modified Chromium

Erdoğan A. K., USTA Y.
2nd International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015

Investigation on Type of Wear on PVD Coated Inserts Used on Up and Down Milling

Mamaghani S. A., USTA Y.
International Conference on Applied Mechanics, Production and Nanotechnology, İstanbul, Türkiye, 4 - 05 Eylül 2015

Elmas Nanoparçacık Takviyeli Krom Kaplanmış Gözenekli Toz Metal Parçaların Aşınma Davranışlarının Araştırılması

Erdoğan A. K., USTA Y.
The Second International Iron and Steel Symposium (IISS’15), Karabük, Türkiye, 1 - 03 Nisan 2015, ss.245-248 Sürdürülebilir Kalkınma

Electro Discharge Machining Performance of Chromium Copper Powder Metal Electrodes

Gülcan O., USLAN İ., USTA Y., ÇOĞUN C.
7th International Powder Metallurgy Conference, Ankara, Türkiye, 24 - 28 Haziran 2014

Feasibility Studies for the Manufacturability of Mg Based Micro textured and Porous Surfaces for Biomedical

Tahmasebifar A., Kayhan S. M., EVİS Z., USTA Y., KOÇ M.
7th International Powder Metallurgy Conference, Ankara, Türkiye, 24 - 28 Haziran 2014

SiC Takviyeli Al 12Si Matrisli Kompozitin Toz Metalurjisi Yöntemiyle Üretimi ve Aşınma Davranışının İncelenmesi

Işık E., USTA Y.
7th International Powder Metallurgy Conference, Ankara, Türkiye, 24 - 28 Haziran 2014 Sürdürülebilir Kalkınma

Enhancing The Competitiveness Of European Powder Metallurgy SMEs by An Improved Quality Assurance Tool Based on Latest Digital Radiographic Achievements DIRA GREEN

USTA Y.
PM 2015 Conference, Mumbai, Hindistan, 19 - 21 Ocak 2015

Investigation on the Production Parameters of Porous Stainless Steel P M Parts to be Used on Cooling Units of Fuel Cells

GÜNEL O., USTA Y.
PM 2015 Conference, Mumbai, Hindistan, 19 - 21 Ocak 2015

Fabrification of Micro Scale Porous Surfaces for Mg Based Implants

Tahmasefibar A., Kayhan S. M., EVİS Z., USTA Y., KOÇ M.
Materials Science and Technology (MS&T) 2015, Pitssburgh, Amerika Birleşik Devletleri, 12 - 16 Ekim 2014

Surface Roughening of Stainless Steel Plates by Electrochemical Etching Techniques used for Porous P M Applicatıons

GÜNEL O., USTA Y.
1st International Porous and Powder Materials Symposium and Exhibition PPM 2013, İzmir, Türkiye, 3 - 06 Eylül 2013

Experimental Investigation of Laser-Drilled Holes Variations Depending on Laser Drilling Parameters

Uslan İ., Erdogan S., KELEŞ Ö., USTA Y., Yilbas B. S., Tuc B.
14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.448-449 identifier identifier

Effect of Parameters of Spray Forming on Porosity

Aswad S., USTA Y.
6th International Powder Metallurgy Conference, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.691-699

Investigation of Production Parameters of Porous Stainless Steel Surfaces Used on Fuel Cells

Köylü A., USTA Y.
6th International Powder Metallurgy Conference, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.329-338

Production of Micro Scale Porous Structures by P M For Heat Exchanger Applications

USTA Y., Köylü A., CORA Ö. N., KOÇ M.
13th International Materials Symposium (IMSP’2010), Denizli, Türkiye, 13 - 15 Ekim 2010

Powder Metallurgy in Turkey

USTA Y., USLAN İ.
NDT Days, Sozopol, Bulgaristan, 9 - 13 Haziran 2009

Micro manufacturing of modulated porous surface layers for enhanced heat mass transfer applications

KOÇ M., CORA Ö. N., USTA Y., Min D., Kaviany M.
5th International Powder Metallurgy Conference, Ankara, Türkiye, 8 - 12 Ekim 2008, ss.772-793

Micro manufacturing of porous and modulated surface structures for enhanced heat transfer applications Experimental investigations on process parameters

USTA Y., CORA Ö. N., KOÇ M.
3rd International Conference on Micro Manufacturing (ICOMM’08), Pittsburg, Amerika Birleşik Devletleri, 9 - 11 Eylül 2008

Investigation of The Apparent Density of Metal Powders: The Effects of Mixing Various Powder Sizes and Powder Geometry

URTEKİN L., USTA Y., USLAN İ., SARITAŞ S.
5th International Powder Metallurgy Conference, Ankara, Türkiye, 8 - 12 Ekim 2008

Experimental Investigations On Development Of Rapid Die Wear Tests For Stamping Of Advanced High Strength Steels

USTA Y., CORA Ö. N., KOÇ M.
International Manufacturing Science And Engineering Conference (MSEC2007), Atlanta, Amerika Birleşik Devletleri, 15 - 17 Ekim 2007 identifier

Investigation of Temperature and Strain Rate Effects on Material Flow Curve and Microstructure of Aluminum Sheet Metal Alloys

Mahabunphachai S., USTA Y., KOÇ M.
Materials Science and Technology (MS&T) 2007, Detroit, Amerika Birleşik Devletleri, 16 - 20 Eylül 2007, ss.15-30

Modeling Analysis and Testing of a Computer Controlled Hydraulic System

USTA Y., ERCAN Y.
International Balkan IFAC Symposium ETAI, Ohrid, Makedonya, 27 - 29 Eylül 1993
Metrikler

Yayın

75

Atıf (WoS)

278

H-İndeks (WoS)

9

Atıf (Scopus)

340

H-İndeks (Scopus)

10

Atıf (Scholar)

11

H-İndeks (Scholar)

2

Atıf (TrDizin)

3

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

5

Proje

20

Fikri Mülkiyet

2

Tez Danışmanlığı

24

Açık Erişim

22
BM Sürdürülebilir Kalkınma Amaçları